Dual Universe Creators

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

This is a vaguely Asian themed walled palace. The lower hallways of the wall are large enough to accommodate expanded XXL containers. Just push them into the floor a bit. The base is designed to be pushed into uneven terrain, but it would be trivial to add a floor and use it as a large basement. This structure is located on Alioth, 7km north of Market 6. ::pos{0,2,39.2832,101.0451,299.8752} Dispenser is inside. There is an encampment chair to sit in to get a 3rd person view. VR Walled Palace.

This is an easy to build mining station designed with cheap elements. This station have 6 large extractors linked with a large container to receive minerals. This station is build on a S static core for modular purpose. The blueprint can be find inside a dispenser on Alioth : ::pos{0,2,46.6090,96.4753,134.4049} The dispenser is on the rooftop.

The newest addition to Terran empires buildings. This is the mining plattform Terran Excavator (TE), that are adressed to the new players. But yet at the same time to the experianced player, who can use it for higher tiers of ore due to the low cost. There are room for two (2) Mining units. and a capacaty of mining storage of 48 KL (With talents), in 4 small containers on the roof. There are also room for two (2) small parcel containers outside, if needed to use the mission system. And ofcourse there are even a resnode, vr station and vr pod installed. And there are still more room for you to add more storage. The "TE" is coming in five different tiers of MU´s. Basic Uncommon Advanced Rare Exotic The (*) shows witch one are up for a full package sale. We even have the "Territory helper" scrip installed for you to keep track on the cost for your tiles.

ETA Mining Platform Easy Cheep and better then nothing. BP requires 4L containers 1 Hubs 8 Square light s 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

Features: The Ta'veren Mega Factory is a fully modular, easily-expandable, space or static factory BP for those of you who want to link up a machine to print an end part. This factory is set to produce all components for tiers one to four. All parts with multiple outputs are designed to cycle contents. If you need more links, simply add a new box and transfer unit, remove the link from the topmost box to the bottom transfer unit, pointing to your new transfer unit, whose output goes to your new box, and link the new box to the bottom transfer unit. If you find it isn't producing as many parts as you need, simply add a new machine on top of it and have the output go to the next box. All industries are named with what they produce, as are the output boxes, so you can easily identify where things link. Color coded borders surround industries with what Tier. Also comes with DU-Locura-Storage-Info for ores and IndyHUD for your industry monitoring.

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

If you're like me, you love Dual Universe and the amazing freedom it gives us to build whatever we want. However, some of us are more inclined to fantasy settings over Sci-fi. Others might just want a change of scenery for some of their buildings. If this is you, then check out Stormsteel's Fantasy Building Kit. This kit uses almost entirely t1 honeycomb by default, with the tiniest bit of lumi glass. The Fantasy building kit includes pillars and several wall stylings to build a castle or cathedral-like structure. Various doors and windows allow you to differ your indoor vs. outdoor styling or just have a nice variation all around. The kit also includes several decorative voxel pieces such as crystals and hanging banners. This Kit will continue to be updated, and as it improves the price may rise. However, once you own it, you will never have to pay more to receive the updated versions. See below for current version and Changelog. VR to "Stormhold" to see the Fantasy Building Kit in person, as well as Stormsteel's personal hanger build with it. Blueprints can be purchased via Dispenser at ::pos{0,2,51.3456,99.1264,-0.0000} - BPs can also be delivered to you at any of the District Markets (especially 6). The BP dispenser at the entrance of the hangar. At the top of the stairs pictured above. Current Version: 1.1 Change Log: 1.1 -Basic Blue Ceiling Added (inluding diagonal section) -Added floor tiles to go over diagonal wall peices -Added parapets to go on top of pillars

No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

50% off blueprint price at the moment on dispenser This is a complete kit of my landing pad without basement, you can make any size landing pad you like even connect 4 cores together for extra large one or even larger, ive tried to make the instructions as simple as i can but hopefully if your interested in this kit you already know how to copy and paste and rotate etc please check out the pictures for more info and if you need any questions answered dm me on discord loaded#2378, location on your right in the info and the dispensor is in front on the landing pad, i also added a base part with no wiring details also u will want plenty of medium glass panel to go over the wiring detail, can also change the colour to your what ever you like. PS no need to press shift when adding the leg stands

A fancy mining rig on S core: 4 mining units, one container L and one VR node.

XS Core Bunker. At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} More Comming Soon!

VR: "VO Factory Sales" 24 Hour production with no talents Advanced Atmospheric Engine XS - x80 Advanced Atmospheric Engine S - x20 Advanced Atmospheric Engine M - x5 Advanced Atmospheric Engine L - x2.5 Advanced Space Engine XS - x80 Advanced Space Engine S - x20 Advanced Space Engine M - x5 Advanced Space Engine L - x2.5 Advanced Space Engine XL - x0.6 Advanced Hover Engine S - x21.2 Advanced Hover Engine M - x5.3 Advanced Hover Engine L - x2.6 Advanced Flat Hover Engine L - x2.6 Advanced Vertical Booster XS - x80 Advanced Vertical Booster S - x21.2 Advanced Vertical Booster M - x5.3 Advanced Vertical Booster L - x2.6

"Techo Advance" is a luxury villa, complete with various unique voxel elements, like cooker, pots & pans, shield art, weapon displays, and so much more. Showcase video https://www.youtube.com/watch?v=AxA3Km_OhAI This modern art work consists of a functional S core elevator to move personal vessels into an underground hangar. It also has a personnel elevator at the entrance to the villa which acts as a permanent barrier when not in use. Lastly, a vault door to secure your most valuable possessions! For the interior there is a fully kitted kitchen with fridge, countertops, cooker and two basin sinks. Dining, lounge, meeting, cinema and bar all beautifully designed with ancient artefacts! Contact: Actimist#4020 Primary designer: IEYESI Contributors: Factory worker: Visit NovaX showroom here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}