Dual Universe Creators

S core hauler capable of 1.5Kt off Alioth. With Warp drive. VR to "Stingrays Haulers" or come by at ::pos{0,2,24.5641,69.9976,100.9678}

Blueprints now available for purchase at Hadron HQ Alioth. ( ::pos{0,2,-21.7618,122.5465,114.3602} ) Warp cells cost dearly. If you haven't got valuable cargo to transport, warping is often too expensive to justify. The Bantam is a personal craft for planetary travel, market runs and nanopack-sized purchases, transit between the surface to your space station, or an occasional joyride to a nearby moon. It takes off quickly and accelerates to max speed in seconds. The sleek, low-cross-section profile allows re-entry or cruising in high atmosphere at up to 2000 km/h without damage. Albatross HUD makes piloting a snap. The Basic Version can be built entirely in the nanocrafter, except for the optional square light and atmospheric radar. Both of those components can be obtained from starter outposts, if desired, as can many more such as engines and adjusters. The blueprint has level 5 placement for space, atmo, tanks. Honeycomb colors can be easily changed now, so go crazy! (purple and green not required) Because it weighs less than 10 tons, it can accelerate to 50,000 kph max speed. On a round trip it will use about half of the XS fuel tank with no talents. Plenty of reserve for emergency turn-and-burn braking if necessary! This little ship is a lot of fun to fly and can get you to any place in the solar system at a fraction the cost of UEF ships.

With 300+ hours of "Voxel precision tool" and lua scripting the Turtle II is the ultimate upgrade of an already iconic ship. Designed to maintain off-planet mining sites that are on a 2 week collection cycle. With deep space exploration in mind the ship is capable to be armed with e.g. 8 S-size weapons. - - - Recoloring options: - - - Recolour all screens and lights -> activate switch -> select colour on touchscreen. Activate seat-switch or enter pilotseat for shield and ship monitor sync. Test it at our showroom. Recolour-kit for all accent lines available DRM free. All screens made in lua screen tech and sync with RGB databank. Aditional parameters in programming boards e.g. background and signature. Innertia matrix is trimmed to 3KT cargo. Nearly zero off axis rotation when fully loaded. - Can fit M shield. - - - Ship stats - - - Uncommon military atmospheric / Uncommon maneuver XL space: 1G (alioth to space): lvl5 pilot skills 2500t lvl4 pilot skills 2250t lvl3 pilot skills 2000t (no altitude eff./no warmup opt.) The ship can hover and move with 5600t. Glide reentry works fine. (tested with 3600t) We provide Put down (technican) buffs for every of our Blueprints free of charge as soon as available again. - - - Token options: - - - Green/Red/Purple versions with matching forcefield/door etc. skins! Uncommon maneuver or military XL engines. VR: Hadron HQ Alioth

Puddle jumper from Stargate Atlantis. Available with all modification you need: - more speed, - other color...... -pvp This little gem of technology, product of "penrose industry", will take you where you want to go: safety and quickly !! Contact thibz#1965 on discord for any question. Originaly Created By "penrose laboratory" enjoy

https://du-creators.org/makers/Hagbard/ship/Rebellion%20Evo%20II%20adv.%20by%20Chewie%20and%20Hagbard The Rebellion EVO II is the next generation of the popular rebellion. Tokens available for the "T3 Advanced" version BP's are the same price with 6m Quanta. Token Prices: Rebellion EVO II Advanced 17.25M Quanta We tried to make the token prices really competitive. They should match the prices for the full parts at the markets (+BP Price), so unless you build your own parts and have good talents, you will probably not be able to buy it cheaper on the markets today. The dispensers are in the Alioth ::pos{0,2,-21.4557,122.4885,170.6865} The Rebellion EVO II is a ship created by Hagbard and Chewie_1. It's predecessor was one of the most popular ships during Beta. It can be build without having to invest a fortune and is an ideal ship for new and experienced pilots. The ship technology and Lua was done by Hagbard with efficiency and performance in mind The great High Quality Voxelwork was done by Chewie_1. It included a warp drive, 2x uncommon or advanced Atmo engines, 2x uncommon or advanced Space engines. Free Boost to my placement skills if you visit Hagbard on Alioth.

The 420 Freightliner is a light duty hauler. it also comes with 420 Frightlifter BP

I have quited the game, for any info contact orri. or RyanPryde in discord --DU creators website is very bad i got hacked do not trust it-- All likes removed from my ships The Gear Rex personal utility VTOL (vertical takeoff or landing) is a must have for any fleet. Small enough to park practically anywhere and with enough control to take you to your destination with precision and ease; the utility of this vehicle cannot be understated. The vehicle can be flown with a custom LUA HUD or using the default auto config and works great for rescuing ships, reaching hard to reach places or delivering you to the market from a larger AGG ship parked above. The voxel work was all handcrafted using the Vertex Precision Tool (VPT) and all elements are affordable due to their size and grade. For any information or Token request contact me on dicord Captain Harlock#8115 or FinalX#2672 LVL 5 on all elements VR: Kosmos Public DSAT Showroom Dispensers : Alioth Exchange Green hall 7 Alioth Kosmos HQ Location ::pos{0,2,2.8943,105.4507,53.0078}

After 2 Months building and testing, its finally time to release our new Ship the Trinity! It comes in 2 Versions, a Tri Core Scanner and a Cargo Only Version. Both Versions have got a medium Shield Generator and a Warpcore. The Trinity S3 is a Outpost Deployment Ship. It has three Territory Scanners and some space for cargo for all the Elements you need for your Outposts. So right after finding your super worthy tile, you could have everything with you to deploy your Outpost. It should handle around 600t-1kt Materials for your Outposts depending on your piloting Skills. Small Atmo Engines on the side and in the front are making sure you are able to manveuer your Ship to the perfect spot to scan 3 tiles at once. It has T2 Maneuver Engines for longer scan sessions without refuelling and faster warmup times for your engines. The Trinity-C is the Cargo Version. I thought it would be a good idea to do a Cargo Only version because there might be ppl that tend to use the trinity for cargo. The Trinity-S3 isnt made for taking large loads with it, just enough to deploy some Outposts. So here is the Trinity-C with some more Containers on it and Atmo Engines Swapped to Full T2 Military Engines to give you some extra Lift Capacity. All Stats listed here are for the Trinity-S3 Version. msg me on discord if you are interested in the stats of the Trinity-C Unfortunatly no Token sale YET. --- Buy Locations --- ::pos{0,2,12.8827,97.8847,-0.0001} ::pos{0,27,-54.7124,-48.7342,157.2570} VR : Locura Distribution Sales VR: RCG Showroom feel free to message me on discord if you've got any questions :)

10/2023: A workshop has re-opened on Haven and has my old ships for sale. Price dropped to 2 mil per bp. Come check out the ship and my other projects thru VR at "Choxie's workshop". A ship designed for BSW lead engineer dogface. The Diamondface is based on his favorite ship from Elite Dangerous: The Diamondback Explorer. Diamondface is a S-core all-rounder with a single L container and fully equipped for space for atmospheric travel. Safe type Space Engines allow for a rapid warm up and acceleration out of atmosphere. It also features a luxurious interior with bedroom, dinette and bathroom, as well as a respawn node. The design also incorporates a warpdrive which can be excluded on your personal build, if you choose. This ship was designed with aesthetics in mind, but dogface has painstakingly ensured the ship flies, turns, rolls, pitches and yaws smoothly with no overlapping axes, with balanced center of mass and abundant atmospheric lift. We are located on Haven at ::pos{0,27,-80.8347,89.3933,241.4069} If you interested in purchasing blueprints, here is a fast way to get to my base (If you're on Alioth): -Go to any of the Alioth districts with teleporters, and teleport to district 9. -Take the shuttle to Haven from District 9. This will put you at Haven Market 9. -My base is about 35km south of Haven District 9.

The Nomad A1 has been designed and built with efficiency, superior flight behaviour and a clean, simplistic design in mind. If you enjoy being a freighter, run missions, or simply have a lot of stuff to move, you will enjoy this powerful ship which will not let you down. It's an L-core hauler with excellent stats. Having a torque of 545 to 657 MN.m this ship turns faster and smoother than you would expect from an L-core. It's well balanced layout makes it a joy to fly. An insane break force of 1326 MN allows you to savely operate within the atmosphere, and while the ship of course comes with an AGG, most of us simply land it on a runway as if it was an S-core. The substantial low altitude lift of 621 MN makes it easy to lift 20.000t and more from Alioth into space, and the ship's slim frontal cross section defies it's huge cargo bay of 10 XXL containers holding up to 7680 kL. Warp drive, reverse engines for clean maneuvering, and over 200 airfoils complete this ship. A dry weight of only 4.5kt tell you that the interior has been reduced to the minimum in order to optimize the flight stats. High quality elements like the rare military space engines XL, rare phased-array space radar, and rare capacitor shield generator give you a lot of bang for your buck, and an intelligent placement and linking of all fuel tanks make servicing the Nomad quick and easy. And, if you are not planning to go to space, you will exactly know which tanks you can leave empty, while the tank logic follows a simple balancing method so you will not constantly fly around with much more fuel than you really need. A huge glass cockpit ensures perfect vision, and the clean outline of the ship make parking the Nomad very easy. The A1 comes with ArchHUD by default, but can be ordered with Albatross HUD likewise. The Damage Report script optionally can be casted to two transparent screens in the cockpit, giving you full control of the situation at any time. All decals can be customized upon ordering your ship. If hauling is your thing, or you simply need a reliable and good-looking workhorse in your fleet, you should consider the Nomad. Prices listed are for the blueprint or token of the A1. The token version comes fully fueled plus 500 Warp Cells for your initial jumps. You can see the ship always at ::pos{0,2,38.8701,113.8880,-56.7414} or visit in VR at "Starcom Incorporated HQ". Test flights can be arranged too, please contact via Discord in any case. --- Is there something more you can get than the A1? Hardly, but if want to go all the way and spend even more money, there's an R1 version (https://du-creators.org/makers/StarcomIncorporated/ship/Nomad%20Class%20Hauler%20%28R1%29) which turns your 20.000t hauler into a 30.000t hauler while increasing the cargo bay from 7680 kL to 12979 kL. As this requires all the atmospheric engines to be upgraded to rares, the price of the R1 is substantially higher than the A1. Do you need it? No. But if you can afford a Porsche 911, why not buy a Porsche 911 Turbo? :)