Dual Universe Creators

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

Designed to be an entry for the NQ Build Your Legacy contest. Feature an all-in-one outpost for a good start and a safe place on heaven.

Thank you to everyone who was interested in this project. This has been sold to Fyrestrider. Please reach out to him in-game with any questions. This was sold as a one-time piece, DRM-Free Core BP and token. I do not have the ability to make another, only Fyrestrider does. Perso is a shore-based fixed mining platform. Originally designed for The Wendence Bauxite Meganode on Feli by the now-defunct Cracker Barrel Org. Construction started 12478 and completed early 12482, it reached peak production in 12490. Decommissioned in 12501 and transported via VTOL to its current position at Satrion Corporation's Feli Restoration Plant. ::pos{0,5,10.4711,-153.5337,18431.2520} Surrogate VR - Perso The restoration of Perso has seen multiple setbacks. Lack of interest and funds to restore the mining relic has led Satrion Corp [RION] Board of Directors to fund simple upgrades, such as auto-mining units, fuel refining, and a converted second-floor executive lounge for ore production and repair parts. Other restorations include all new lights throughout, upgraded safety barriers for NQSHA compliance, as well as all-new gas-filled windows in all areas for a comfortable mining experience. "We believe the current upgrades will more than suffice for today's demanding mining needs." Said Armand Reed, CEO and head of product development at Satrion Corp. Both lower-level and rooftop cranes are non-functioning. Stairs from first-floor offices to the second-floor executive lounge have been removed, as well as stairs to rooftop access. Elevators have been retrofitted in these areas for more dynamic access to second-floor ore refining and rooftop storage. Ground level access to fuel refining with large amounts of Nitron storage. Detection zones to auto open and close doors. A force field to the executive lounge catwalk to ensure pressurization allowing this rig to be transported to moons for non-atmospheric applications. All new electrical for the upgraded areas. Fully compliant with the current Novean Institute of Standards. All concrete sub straights have passed all inspections for compressive strength. All metal girders have received full restoration and a fresh coat of Rooster Red Paint from the Sinnen Paint Company. (Certification Available upon request) Note: This was not designed for habitation. Does not include bathroom facilities or sleeping quarters. Please check system-wide and local planetary authorities before converting for such uses. Any unauthorized conversions will be at the new owner's full expenses and liabilities. Satrion Corp [RION] is not liable for any future fines. Check with your local authorities. Features: Five Auto-Mining Units (With equipped hyperdiamond core-bits, Non-Cason Compliant) Five ore refinery stations. (Room for more, electrical not included) One Nitron Refining. One X4 Refining. (Compatible for X1, X2, X3 - Tank scrubbing required for fuel type change) All New LIghts All New Windows Upgrade pressurized doors and locks. Safety barriers installed Emergency Exit ladders have been installed. Redecking of the rooftop landing pad (NQSHA Compliant Lighting added) Satrion Corp [RION] is selling Perso as-is and does not include any warranty. It will be a DRM-free one-of-a-kind token. We will hand out our only Core Blueprint as well as the tokenized construct at the time of sale. It is recommended a certified NQSHA inspection is complete before attempted use of any lower-level or rooftop crane. You will need to make arrangements with a rigging company of your choice if you do not have the means to transport this yourself. ((This is a one-of-a-kind piece. I will not replicate this after this piece sells. I am also not keeping a copy of any blueprint or core blueprint after the sale. It will be the only one in existence unless you decide to make more blueprints))

This is an easy to build mining station designed with cheap elements. This station have 6 large extractors linked with a large container to receive minerals. This station is build on a S static core for modular purpose. The blueprint can be find inside a dispenser on Alioth : ::pos{0,2,46.6090,96.4753,134.4049} The dispenser is on the rooftop.

A passion project of mine. I will not deploy this on live but I do have a core BP and can distribute it if anyone wants one.

We are also located at the Alioth Exchange in the Red Isle I am at it again with more factories!! Are you a Space Only Person and would like to just make your own Space Cores without the cost of having to buy a core factory that makes them all???? I got you!! This Space Core Factory produces all size cores This is what it will produce every 24 hours with no industry talents XS Space Cores---720 S Space Cores-----60 M Space Cores----4 L Space Cores----0.7 For any questions, please reach out to me on Discord We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

An L-Core Space station with 5 landing pads a Small Hangar Bay and Dry Dock for all your Building Projects. The Lower Level is open for Storage and some industry.

Here it is! The Kombat Extendable Mining Rig, Landing and Launch Pad system. Build with the custom, patented landing deck. This one does not use fussy zero-G technology but relies instead on trusty steel and concrete to keep everything upright. On deployment you can chose your own building material honeycombs (Primary, Contrast, Metal and Lumi). Comes in four flavours with each it's own distinct role: Barrier - (Bp: 0.9M Token: 2.7M) The basic variant is used as a simple but elegant landing platform that allows any M-core or smaller ship to land safely on it. Guided by landing lights and having a nice elevator down to the ground. Corsar* - (Bp: 1.8M Token: 3.6M) This one comes with a hole in the top! But in that hole fits a Medusa Y-Lift capable of lifting around 600tons on Alioth and up to 2Kt on places like Madis without talents. It comes with a nice ramp that allows you to walk up right to the Elevator seat. Kombat - (Bp: 1.8M Token: 3.9M) Ah, the trusty workhorse of the lot. Why not have you landing pad AND do three tile mining all from the same spot? Comes with 3x basic and 1x uncommon mining units but can be extended or swapped out to any configuration. Comes with all the luxuries of both the Barrier and the Corsar but also spots an Large Container to hold all your ore. Can be deployed to service 1, 2 or 3 adjacent tiles from one location. Stugna* (Bp: 2.4M Token: 4.9M) The big boss. Why not combine EVERYTHING? Have a decent landing pad, a launch pad for your elevator AND have access to three mining rigs all at the same time? Place one of these in the middle of a super-flower, add a few containers and do your weekly mining run with your pocket-speeder, dumping all ores straight into the elevator storage, ready for lift-off. Why spend any more time on dusty rocks while you could be sipping a Pan-Galactic Gargle-Blaster back at home and let the Kombat Rig do it's work? * Comes without the Medusae S-Core Elevator that fits the exact dimension. Can be bought separately (Bp: 17M Token: 24.5M). In order to dock in space we highly recommend the Bogdan Space Dock L-core landing (Bp: 3.8M Token: 15.8M). This doubles as an L-core space landing pad and space station. As nice as pictures are, a visit is worth more than 1000 of them. VR over to SVEA Elevator Showroom and cross it to the North, can't miss it. The Bogdan can be viewed at VR: NSS MADIS VR (this one is being developed right now) Please discuss order and installation. I want to do a first installment myself and discuss all the details, then hand over extra blueprints when needed.

Better then Dirt No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

*Updated 11/1/22* Now includes Jericho's MU-Monitor Pre-Installed. Simply add MUs and link them to the programming board to see all info on one screen!! New BPs Available at D4nkWorks Showroom These are Long-Term Mining Towers with space for 8 Auto-Miners Designed to fit ANY terrain. The bottom of the tower can be sunken into the land as far as needed and has ladders for access from the ground. Add a surrogate pad and you can easily VR there to calibrate your off-world tiles. The landing pad on top fits S core ships easily and provides EZ access to all 8 miners and the Hub. Landing activates the screen which shows how much ore is currently available. LUA included. Basic Mining Towers have space for your Org name on the side to let people know who's mining in style!

L core Modular Space station with a Atlas L core Elevator docking cradle (it can dock other elevators with small modification) , you can easily expand the station with additional modules like the SKY Aegis SPC Dual PAD Visit at VR: SKY Aegis SPC Core Atlas Blueprints available at Alioth: ::pos{0,2,54.7335,109.8047,69.0288}

Dry Dock LC-01 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

DPS Pads - built as building area pads, also usable as showroom and parking pads. Single static XS 2,500,000) and S (3,000,000) BPs DRM protected. DRM free BIY kit and space versions available soon. VR: Deeh Store (dispenser + preview -> basement) If you have questions, don't be shy - contact me on Discord!

In the process of moving, blueprints are available to Kosmos Exchange. Space, it's got all that and the chips! L Core Space Factory shell. Lots of space to make your factory look pretty cool. Getting tired of stacking machines your machines on voxel landing pads? Well stop doing that and factory in style. Tons of hidden storage space. Easily see your machines, lay it out as you like. Center command platform with multiple levels and even decorative hangers (hydroponics look is my set up). Modular set up makes it easy to set up with additional modules including hangars, landing pads, storage modules, elevator modules and more. Come see it in VR at "Czar in Space Showroom" or directly "Czars Space Factory" Dispensers located here ::pos{0,0,-42090.7405,202368.7623,33445.6155} (Please note that VR and in person is an active factory and may have changes made that are not included in the blueprint, please ask if you have any questions)