Dual Universe Creators

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

A fully set up fuel and warp cells space module. 72 cells per day without any talent, Kergon, Nitron and Xeron fuels Custom LUA to manage and monitor production Uses two main hub with each 10x containers L: Ore & schematics hub: Input hub for all schematics and ores except pyrite Fuel / Pyrite / Catalyst3: Output hub for fuel and cells. Also used as input for pyrite and catalyst (optional and only used to speed up initialization) To start production, go down to bottom level and run each board (7) until screens go green. Those will set up each machine by selecting recipes and start them with correct maintain values. Special thanks to Captain Ardan and RyanPryde for their voxel kits and Jericho and SilverZero for LUA resources https://github.com/Krengus/DU_ASTco/blob/main/Warp%20%26%20Fuel%20Space%20Module/monitor.json

In the process of moving, blueprints are available to Kosmos Exchange. Next up in modular factories is Czars Space Fuel Factory. Making Nitron and up to 2 styles of Kergon. Add it onto one of my Space BigLandyPaddys for full autonomy in space. Command center with Jerichos Storage LUA and My Hub screens. See it in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42006.4114,202236.9961,33625.3975}

Landfall pads large core landing zone. vr ADMI Build Store or visit ::pos{0,2,-24.6313,16.8071,150.4663}. (Large static core) questions emladra#8532

The goal of the Alioth Hyperloop project is to connect various space elevators and towers to the markets via an underground tunnel and train system. Enabling efficient movement of large cargo to and from space and markets. Over 150km of tunnel has already been constructed demonstrating the movement of 1000tons 60km at 500kmhr for 100L of fuel. Now seeking partners, investors, - for - Public Relations and advertising, purchasing or leasing land, and construction of stations and tunnels. Also seeking landowners and tower or elevator operators who would like the convenience and profit of having the Alioth Hyperloop through their territory. VR demonstration track and self driving train - coming soon!

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

Nemesis Harvester Unit. Reverse engineered from ruins uncovered at Obsidian Dragon Headquarters. These Alien Mining Unit are out of this world! Available Harvester X1 set for 1 Miner 250k xs core Harvester X2 set for 2 miners 500k xs core Harvester X4 set for 4 miners 1million s core VR Dracks ShowRoom

The plan was to test out how to make a space station about 65KM from the planet. Assuming I'd succeed the idea behind the station was to use it for making fuel and basic scrap without having to land on the planet. So I obviously succeeded at making the space station however, the location was completely wrong for the job. It turns out you need to make the space stations away from where your bases are and stock them with resources you need at those locations. That said it was fun doing it for the first time and the views are super.

In the process of moving, blueprints are available to Kosmos Exchange. Fun and Funky little space station. You too can create a nice little home in space with this station. Landing pad on top, nice spacious hangar, plenty of room for industry and storage all in a colorful package. Easy to expand with access doors on 3 sides to add more landing space. Industry area has a couple of different expandable set up options for your convenience. Plenty of space for parts storage as well. Gates are not included in the blueprint to help lower deployment costs. T1 Honeycomb. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

PYRAMID LUMEN GLASS FACTORY This factory can make a ton of luminescent glass in a day! 12000m3 per day! Just like all our factories everything is simple to use and container hubbed for easy expansion. Ore in/Waste out/Product out Pays for its self on day one! READ OUR BIO FOR MORE INFO

A complimentary addition to the stalwart Logistics Centre, the Mining Outpost enjoys the same style and feel, while giving you the space and comfort needed to enjoy every aspect of your environment. Located on just a Static Core S, this spacious Mining Outpost can be equipped with up to 6 Mining Units and 4 Large Containers. The Outpost also has a casual office floor with VR Pad and Screen to help you quickly see your MUs progress, your storage capacity, and your calibration needs. All in the comfort of an armchair! The construct has been designed with variable land heights in mind, allowing you to sink the foundations down by 2-3 meters, to ensure a sleek and smooth access to the building, and preventing half of it 'floating' away. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

Decorative Element drm free VR "Alioth Marina"

Originally called the 'Fortress Refinitorius' in Beta, this Star Wars Inspired build was quite fun to put together. Suited for many terrains or off-shore, this themed mining platform makes a great personal HQ/factory as well. FEATURES: -Height gives options for what level above surface you'd like the main structure -Imposing and intimidating presence of Sith (Vader's) technology built into the outer façade. -Uniquely designed factory floor -Large open cargo container storage area -Personal living quarters -Throne Room -Conference Room -Balcony -Mining Units (at max height, reduce if surface ore fails to spawn after calibration)

Put your favorite cantina song on repeat as you plan your next builds and adventures. All are welcome, but your droids will have to wait outside! During beta I asked myself the question, what hadn't been made yet that people would love to see in the world of DU. After looking over nearly every frame of the cantina ever shown on film, every available blueprint online, former cantinas designed in all popular SW games, and even the entire PDF for Lego's step-by-step instructions - I felt prepared to bring the iconic location to life. All in all took about a month of casual playing to build/finalize. Static Model of the Cantina is on display at LSA Industries HQ, 13Km SE of Alioth Exchange (VR Location 'LSA Industries Alioth') *What is on display is what is on the blueprint, all furnishings, screens, lights, chairs, etc