Dual Universe Creators

Dr. Zoidberg from Futurama. He's an M core wide, and is DRM free. :) VR: Mnc Shop Grab the pos from VR, since my shop is on a dynamic core. ;)

Ikara Industries presents the "Ikara Panel KIT S01". The walls should look not only consist of a straight voxels. then the "Ikara Panel KIT S01" is just right for you. With this panel KIT you can create buildings, beautify and so on. The KIT includes: - 20 different panels - 1 panel for the entrance - 1 corner - 2 different slopes - dynamic S-core - Two screens to view all 20 panels before having to go in build mode VR: Ikara Industries or Ikara Industries Exchange Where to buy? Ikara Industries or Ikara Industries Exchange (in the Yellow Hall at Alioth Exchange) Any questions? - Message @Ikara2184#2629 on Discord.

With the inspiration of Damphousse´s pipes, I started my own ones from scratch. Exact 6 voxel diameter. Will perfectly fit the shapes from our circle library. Includes: 90 degree bow, crossing, T junction, 45 degree pipe with joints, flow arrows, flow indicator, valve / endcap, double and single floor/wall mount, double raised mount, glass furnace/chemical housing. Easy to recolour or swap the voxels while placing. Everything is handcrafted with no smoothtool involved. LUA signs for demonstrations and LUA bubble animation included. Flow indicators with screens and res node. Everything interlocks. The tank can fit 1 L container. The chains and the donut are made from the 90 degree pipe segment, but aren't included in the library themselves. Check it out in our showroom!

here is my pipe kit 06 with a lot of parts, so an angle of 22.5°. the 45° is missing, which I couldn't do because I didn't have the time. if in the future I add parts, you will be given the new plan without adding quantas ;-) DRM free for you to use on all your ships. Shipbuilders: please leave DRM on when selling your constructs for this OS voici mon kit pipes 06 avec pas mal de pièces, donc un angle de 22.5°. il manque le 45° que je n'aie pus faire car pas le temps. si dans le futur je rajoute des pièces, il vous sera donné le nouveau plan sans rajout de quantas ;-) DRM gratuit à utiliser sur tous vos navires. Constructeurs de navires : veuillez laisser DRM activé lors de la vente de vos constructions pour ce système d'exploitation

Tribal dragon base decoration. (Sorry for the rubbish picture,,, i forgot to take an official one before dismantling) Copy and paste this wall art from the DRM free dynamic core. background has been left out so you can sink it into the wall of your construct Blueprint dispenser is located at Kosmos Ship Showroom. Alitoh ::pos{0,2,2.9253,105.5852,70.6037} PLEASE DO NOT BUY IN VR. Please contact Orri #2335 in Discord to refill the dispenser

I made a font for my new build style and went for the full alphabet with some extra symbols. Roman and Cyrillic letters. Original voxels are 3 wide x 5 high. Extruded to 2 wide x 3 high. All edges have been beveled. Works as floating letters or inside a voxel surface. If you place it in a surface grab the already inlaid parts and recolour them. You may need to correct some flickering voxels. Can be viewed in our showroom. VR: Hadron HQ Alioth

Prefabs built for stations, ships and compact ship interiors for maximum size reduction in PvP. The library is on a Dynamic Extra Small Core allowing repositioning and removing any issues with placing a static structure. When copying and pasting components, don't forget to rotate/mirror and align. If you Paste and it doesn't do what you want, BACKSPACE and try again with the SHIFT key (or opposite what you originally tried). BP is avalible from a dispenser at our location. NO DRM protection to allow for Copy and Paste.

By popular demand, the DRM free landing pad set to make my famous (in my head) landing pads. Build to your specifications, make them as big as you want or as small as you want. Set includes everything you need including straight, 90 degree and 45 degree outside corners, inside corners, stair set to access the interior storage areas, pillars to make multilevel pads, and a very special hallway set for the interior space. This is the same set used to make my S, M, and L core space landing pads and my L core static Landing pads. You can also find them in use at the Kosco Megastore and at the Kosmos Showroom. Can see the set in VR at "Czar in Space Showroom" Examples are right outside the showroom and also at Kosco or Kosmos Showroom. Dispenser located in space and soon to be at the Alioth Exchange and also at Kosmos Showroom in my shop.

The BLOCK VAULT contains lots of fonts and core cover BPs - all (but one) made by Metallical. And the best thing about it: EVERYTING IS COMPLETLY FREE! VR: Block Vault Location: ::pos{0,2,17.1686,111.2242,37.0846} If a dispenser is empty, or if you have questions, don't be shy - contact me on Discord!

A kit with various parts to make buildings and landing pads: walls, stairs, pillars, voxel AGG for "hanging" platforms and various structures parts. This has been used to build Aerogics factory and pads, which you can see via VR on Haven (look for any Aerogics VR) Honeycombs can be changed on deployment to customize (non DRM bp so you can generate your own bp at any time and respawn it with diff honeycombs): Aged Brown Pattern Wood 3: stairs banister Galvanized Gray Iron: landing area Glossy Yellow Plastic: lines on landing area Luminescent Icy Blue Glass: AGG voxels Luminescent White Glass: inside lights Luminescent Yellow Glass: outside lights Matte Light Brick 1: main HC Matte Black Brick: secondary HC Waxed Brick 2: tertiary HC Polished Brown Wood 2: stairs steps Polished White Aluminium: metal struts

-- Availabe at our Alioth base -- Hi everyone, I present you my new circle library. Tons of corners and shapes wait for you to make our world more round! All should be working fine on the new 84 voxel grid. Most parts I checked with polished white titanium for dents and errors. Includes: Standard circles from 1 to 64 radius. (all reworked and checked) Extra vertex circles (extruded extra voxels) from 3 to 12 radius. Cones in 1x0.5 slopes from 1 to 14 radius. Convex and concave rings (inside and outside curved) from 2.5 to 15 radius. Extruded outside curves from 2 to 15 radius. 1x1 corners with different radii. (0.5, 0.75, 1 voxel radius) 1x1 to 1x4 circle slopes. (not increasing in diameter) Corner variations from 1x1 to 8x8. Mini pipes from 0.10 to 1 voxel diameter. 3 L Screens with Lua circles to make your own curves or railings. "some assembly required" ;-) Just kidding, but working with circles require you to manually adjust some joints, so pull out the vertex precision tool and get started. Credits to BIA for the original circles and all the people who helped me in testing this library. Available in our showroom (Hadron HQ Alioth) for 5000 quanta! Version 0.31.3 - Release (Check out my update feed for future additions) If you have something to contribute, call me on discord. VR: Hadron HQ Alioth

Dark Forge XL Space Engine Skin created by theouterrift This DRM free BP is available for purchase at the Dark Forge base on Alioth. How to find: - VR - Search for "DSI Dark Forge HQ" (do NOT buy a BP in VR!!) - ::pos{0,2,21.9994,107.1816,6.5935} - Dispenser is here Near Alioth DM7

CCU brings u the Pillar set. A nice little collection of different type and kind of pillars u can use in your build. Or take them apart and use for something completely different. I made some small and bigger pillars for everyone to use. in various shapes and forms. As whit all our sets i love to see what u guys will do whit them or use them in your builds Visit us in VR : CCU Voxel Library Pos : ::pos{0,2,34.8152,72.6351,260.6589} Take care Novean! Greetings from Henky

DRM free! its a clutter kit with highly detailed pieces on it and ready to use. Feel free to use the kit however you desire! you can view it at vr admi pre order kit to see it up close will be moving the display model eventually and organizing it a little better but there ya go!

Ikara Industries present the "Ikara Assembly line KIT M 01 (DRM Free) The KIT contains different modules (XS to XL) to create an assembly line. The larger modules (M to XL) have slopes to reduce the height of the assembly line to M size. Furthermore a color changing KIT is included. VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.