Dual Universe Creators

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

2 Large Static Core Factory. Made for the most enthusiastic Factory Manager. Features placement pads & sign placement for all machines. Catwalks for easy access and a large Landing pad up top. Tons of room for storage, May take years to fill up!!!,,bit of an exaggeration here. Large enough to handle any sized organization. Come Visit at "Rifter Shipworks" public VR BP's Avail here ::pos{0,22,-32.0802,58.7871,-17.5292}

50% off blueprint price at the moment on dispenser This is the standalone outpost style pad, built on a large core placement rules are just 3 clicks down when your blueprint is flush with the core your stood on once you have it lined up, if your flush on soil/ground just do 2 clicks down you can view at the location written on the right of the screen or view in VR search for loaded industries showroom and your find the structure at the end of the runway, dispenser is located on the structure any question please message me on discord

PYRAMID CANNON AMMO FACTORY XSSMLTK: Need cannon ammo? Need a lot of it? This factory makes 8 different types of cannon ammo! XS, S, M, L kinetic and thermic makes 1000's of rounds per day! low build cost (approx. 6mil) we sell everything needed to build our factories on site. Happy hunting! read our bio for more info:)

Vortex Geometry has developed a mining platform. The platform is called "DREDGER" and is very easy to operate and has an awesome futuristic look and feel. The container is located at the top of the structure, a hub container is connected to it, for convenient access to the ore at the level of the character's height. By the same principle, the mining units themselves. The platform is designed for 4 L Mining Units ____________________________________________________________________________________________________ NOTICE!!! * Blueprints what we are sold it is non core blueprints. ** When ordering more than one BP, you get a discount 15%(BP). If you have any questions, or want make order - please contact me on the discord.

Make a feature of your unsightly DSAT and turn it into an observatory. Voxel shapes only... pls decorate it in your own style... dm me if you want the image and i'll link it. Available to view on my Alioth Base to the left of the hangar behind my Yacht's dock. DRM FREE.... so you can copy and paste it onto an existing core. BP's available in the lil BP shop on my Alioth base HERE ::pos{0,2,2.4733,104.9278,1.5932} You can view all of my creations in vr....Orri Alioth Base... and you will arrive in the airport arrivals hall thanks for looking :-)

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.

One L core and 8 landing (M core) pads that align with the L core. I can help install everything For more info DM Jasper_1 on discord Discound if u buy more 2 for 25 mill 3 for 35 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

Here it is, the L Core deluxe do it all station! Places for everything and have it all. Parking, YES!, build a big ole factory, YES!, Build Storage, YES!. Set up a 170 element storefront, YES! You do you, this is the station to help you do all of that! L Core, 4 Main levels and 5 Mid levels Exposed modules brings a neat look to DU with color coding to differentiate the modules' purpose. Recolor kit for the module rings available. Plenty of enclosed storage or living space ready for you to make it your own. ingredient list in the pics Only elements in the blueprint are 100 some lights, 11 elevators, a surrogate station and the L Core. See it in person or in VR at "Czar in Space" Placement is Rotate 90 degrees clockwise. Starting at one voxel above the platform you want to match up with, 133 clicks down

Hadron Landing Pad Medium ---Features:--- Detailed voxelwork. Only Tier 1 voxel used. 800m3 Plastic 200m3 Brick 16 easy to place L-Container storage. Plenty of space for adding additional industry like a fuel refinery. With the voxel preview and the coming core snap feature, the pad will easily integrate with your base. Centered to the build box of the M core to allow for more storage or industry below. Visit our showroom in VR (outside area).

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

We Create Voxels presents "Diglett" - a voxelised rendition inspired from the original Pokemon series. Available in both Static and Dynamic blueprints, Diglett is a hollow hull and makes the perfect mining outpost for Pokemon fans. Available for purchase at: ::pos{0,2,36.9091,101.8558,144.5942}

Welcome to Digital engeneering Are you someone that like to do LUA, but do not like to build? Or you just need a nice building to work in with your LUA scrips, and then show a new script for the consumer? And even sell the scrips on the main floor. Then is something for you.

Ikara Industries presents the "Ikara Landing Pad KIT T1 (DRM Free)". You have a nice ship but you don't want to land on earth. Then the Ikara Landing Pad KIT T1 is just what you need. The landing pad kit includes - DRM Free - Staircase to the landing pad - 2 different designs - Recess for two screens Placement rules: Hold SHIFT, If you set the modules. What else you should know: Examples: Building a S Core version 4 x Modules Variant 1 Building a M Core version (one side) 4 x Module Variant 1 (4 voxels remain, just move the panels by 2 voxels in each direction) to Buy, Questions? - Message @Ikara2184#2629 on discord.