Dual Universe Creators

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Virtual Tour https://youtu.be/gbw2t_fREzw VR: Manya Mahia Base Camp Available @ ::pos{0,2,64.1378,-131.4176,70.4142} DRM Free BP: 100,000quanta Yes DRM Free, use, take apart resell as you please. Alioth Polar Region - Autumn, 12589 UPDATE: The base camp has been completed and deployed on the site of the ruins. The archaeological team will move in shortly and begin excavation of the buried structure. The site includes two speeder landing pads and two market runner landing pads. Housing and restroom facilities for a team of eight scientists. Ample storage for the team. On-site food production, fuel production, and basic ore refining. Five individual mining units with elevated rigs and deep concrete pylons to hold them in place. (Yes they are there and underground) Five EV Panels are able to run the entire facility. ``````````````````````````````````````````````````````````````````````````````````````````````````` Satrion Headquarters - Alioth - Spring, 12589 A base camp to house and supply the scientific team is currently under construction. In an effort to please financial backers and at the chagrin of the team, Starion Corp has begun a full-scale mining operation at the dig site with future plans to refine into pure and further refine into both atmospheric and space fuels. "The goal is to share the site with the public in a meaningful way. One of those ways is by supplying the basic needs of those that can and will visit the site," said Armand Reed, head of consumer relations.

PYRAMID SELF-REPLICATOR THE PYRAMID CO. SELF-REPLICATOR is an M core factory, a real monster that makes every type of basic and uncommon industry units. All assembly line sizes, and transfer units. It can produce about 20 uncommon units and 30 basic units a day! Simultaneously! and 16 transfer units a day. Easily add, or upgrade with all the sub components available from this factory. Like all our factories, this beast has everything labeled, making it easy to go around and take items for nano crafting. The list of nano craftable parts this thing produces is too long to list, and I keep finding more! Be sure to pick up a Container factory and Screen factory to complete the set and be on the path to creating everything you will ever need to build factories and industry!! We also have an assembly line factory coming soon to make additional elements from all the components faster than nano crafting. So come on by and check out DU's biggest factory BP supplier!! READ OUR BIO FOR MORE INFO

Mining Outpost with independent fuel production. VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

A nice litle house for you to relax in, or have it as an office away from office. And when you just need to chill, why not cook a nice steak on the grill on the deck, looking out over the sea.

This is a small core starter warp cell factory designed mainly for personal use production of warp cells. All industry is labeled via screens for easy startup. Pre installed with Indy Hud by Codeinfused. Current setup will make 2 warp cells every 50mins with no talents. This can be increased easily by adding more glass furnaces for the warp cells and increasing the output of a few of the electronics machines. Industry placement talents will also increase speed of output. All industry units are labeled. You can view it by VR at Phoenix Corporation Location ::pos{0,2,47.8459,114.4380,62.5178}

A single tower landing pad for remote mining sites. VR: Regolith Landing Pad ::pos{0,2,-4.9737,-35.8850,75.4761} DRM Free 8x Basic Container L (Room for 4 more)

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

2B Designs Duo Hangar 2x L Core Size Hangar - Plenty of Workspace (Can fit L core ship) - Plenty of light - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - 2xL Core Size Landing pad - Elevator / Hole Access to the floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) Make sure to over lap the middle of the cores to fit together VR: "2B Hangars Display" Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

Medium core variant of the Deluxe pads at the store location they use the same type of voxels the ones that where built where in a different color to show the flexability of the pads as far as matching whatever you want to use them for. The pads in the pictures are a grouping of 6 pads set to a center 7th core that a customer wanted. Enjoy!!! p.s. bottom stem can be deleted if not wanted so just the walkway and pad underneath up to you! VR ADMI temporary store to get location and dont buy in vr.

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.