Dual Universe Creators

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

Hadron Landing Pad Medium ---Features:--- Detailed voxelwork. Only Tier 1 voxel used. 800m3 Plastic 200m3 Brick 16 easy to place L-Container storage. Plenty of space for adding additional industry like a fuel refinery. With the voxel preview and the coming core snap feature, the pad will easily integrate with your base. Centered to the build box of the M core to allow for more storage or industry below. Visit our showroom in VR (outside area).

Last few months I have been working on this Market Replica. It worked out pretty well. Just check it out in VR. (Market Replica East and Market Replica West) Note: No market machines included. ;-) Place your dispensers there or do what you like. Beneath the base there is a ton of space to make a factory or anything you like. Currently available @ Drack shipshow. Later available @ Kosmos showroom.

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura X8 Pro is our most ambitious rig yet! All the features of the X8 with a new look and larger landing pad. M Core design for extending the landing pad even more if needed. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Derrick (Nodding Donkey, Pump Jack) Mining Unit. Holds 4 Mining unit L. 1x L container with Hub. Screens and board for Lua. Space underneath for Ore Collection. Comes with 4 Basic MUs, 1 L Container, 1 Hub, 2 Screens, Prog Board, Vr Pod, lights etc.. Most Voxels in Iron. All Basic Stuff

This is an easy to build mining station designed with cheap elements. This station have 6 large extractors linked with a large container to receive minerals. This station is build on a S static core for modular purpose. The blueprint can be find inside a dispenser on Alioth : ::pos{0,2,46.6090,96.4753,134.4049} The dispenser is on the rooftop.

Medium core variant of the Deluxe pads at the store location they use the same type of voxels the ones that where built where in a different color to show the flexability of the pads as far as matching whatever you want to use them for. The pads in the pictures are a grouping of 6 pads set to a center 7th core that a customer wanted. Enjoy!!! p.s. bottom stem can be deleted if not wanted so just the walkway and pad underneath up to you! VR ADMI temporary store to get location and dont buy in vr.

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A1 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Available at Coords: ::pos{0,2,38.9120,109.2847,89.6767} is this beautiful 8-bay mining station! - Plenty of room below to collect ore processed from calibrations - Basic Container M to collect ore, with a beautiful shroud to cover - Shrouded mining units - Easy Access - Up to 8 Mining Units to place, no matter their size - Feel free to VR to MATTENASH INDUSTRIES to take a look before buying Friendly reminder to not buy in VR. Happy Mining!

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

Production Per 24 hours with no industry talents Basic Assembly Line XS- x720 Basic Assembly Line S- x180 Basic Assembly Line M- x45 Basic Assembly Line L- x11.25 Basic Assembly Line XL- x6 Basic 3D Printer M- x45 Basic Chemical Industry M- x45 Basic Electronics Industry M- x45 Basic Glass Furnace M- x45 Basic Honeycomb Refinery M- x45 Basic Metalwork Industry M- x45 Basic Recycler M- x45 Basic Refiner M- x45 Basic Smelter M- x45 Transfer Unit- x11.25 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

The CCU Crane Set. Do u need a crane for your heavy lifting jobs? Then CCU has a very nice and modular crane for u. This heavy duty crane will make any lifting a piece of cake. It has a turning radius of 0 ( cause DU dos not allow us to ) It can lift up to any amount ( tested at 100KT ) Cable length - as long as u can make it. ( keep it responsible ) Get your crane today ! U can visit us in VR at - CCU Voxel library Or in person at our location - ::pos{0,2,34.7581,72.5932,-0.0001} (Alioth) Fun intended. But have a great day Novean ! P.S. To be able to use a heavy duty crane u need a special permit and license. It is not possible to hire a specialist crane operator.

In the process of moving, blueprints are available to Kosmos Exchange. Get into space quickly and easily with this S core space station. Whether you're new and want to give space a try or a veteran needing to set up a refueling/storage station in orbit, this is for you. Plenty of storage space, room for some industry, clean control center/small hangar and landing on top. Need More landing space? Add on landing pads available. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

XS Core Bunker. At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} More Comming Soon!