Dual Universe Creators

2B Designs Hangar L Core Size Hangar - Plenty of Workspace - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - Good Size Landing pad - Elevator / Hole Access to floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) VR: "2B Hangar 2B01 Display" For a display of the Hangar Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check you joins before you deploy construct.

50% off blueprint price at the moment on dispenser This kit will allow you to make any size hangar you like over as many cores as you like just like my landing pad kit and you can take this kit any where ground or space, there are endless possibilities with this kit, when using the kit there are some thin voxels on parts of the design like bolts etc make sure you grab all when copying, there will be some small patches you will need to fill on roof due to the angles there is also a limited offer at my location aswell for this blue print with the pre built hangar blueprint any questions please dm me on discord.

If you're like me, you love Dual Universe and the amazing freedom it gives us to build whatever we want. However, some of us are more inclined to fantasy settings over Sci-fi. Others might just want a change of scenery for some of their buildings. If this is you, then check out Stormsteel's Fantasy Building Kit. This kit uses almost entirely t1 honeycomb by default, with the tiniest bit of lumi glass. The Fantasy building kit includes pillars and several wall stylings to build a castle or cathedral-like structure. Various doors and windows allow you to differ your indoor vs. outdoor styling or just have a nice variation all around. The kit also includes several decorative voxel pieces such as crystals and hanging banners. This Kit will continue to be updated, and as it improves the price may rise. However, once you own it, you will never have to pay more to receive the updated versions. See below for current version and Changelog. VR to "Stormhold" to see the Fantasy Building Kit in person, as well as Stormsteel's personal hanger build with it. Blueprints can be purchased via Dispenser at ::pos{0,2,51.3456,99.1264,-0.0000} - BPs can also be delivered to you at any of the District Markets (especially 6). The BP dispenser at the entrance of the hangar. At the top of the stairs pictured above. Current Version: 1.1 Change Log: 1.1 -Basic Blue Ceiling Added (inluding diagonal section) -Added floor tiles to go over diagonal wall peices -Added parapets to go on top of pillars

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

PYRAMID WARP CELL FACTORY: BETTER THAN THE REST CHEAPER THAN THE REST MAKES APPROX. 244 WARP CELLS PER DAY! 288 WITH LVL 4 TALENTS! LVL 4 PUT DOWN SERVICE 5MIL DOES NOT COME WITH SCHEMATICS. LIST OF SCHEMATICS NECESSARY CAN BE FOUND ON OUR DISCORD. UNLIKE THE OTHER MODELS FOR SALE ON DU THIS FACTORY COMES WITH EVERYTHING LABELED FOR EASY SCHEMATIC PLACEMENT. SCREEN LUA, SAME BASIC DIMENSIONS AS OUR OTHER FACTORIES SO THEY WILL ALL LINE UP NICELY. LIKE ALL OUR FACTORIES; EVERYTHING IS CONTAINER HUBBED FOR EASY EXPANSION, COMES WITH DISCORD AND IN GAME SUPPORT DISCORD: THE PYRAMID CO, https://discord.gg/MsMDcbgWBB CHECK OUT OUR SPACE CORE VERSION! MAKES THE SAME AMOUNT AS OUR STATIC VERSION!

In the process of moving, blueprints are available to Kosmos Exchange. Space!!!! It's got electrolytes. It's time to upgrade from that voxel thick landing pad with containers strewn about? You'd like some style? You like furniture from Ikea? Look no further, I've got you covered with the new modular series of stations offering you usability and looks in one package. This station features ample landing and hangars for XS-M size ships. A big pass-through hangar for building or parking up to M core ships, 3 XS core hangars and 3 wide XS-S hangars. In addition, there is a ton of storage space, about 2 M cores worth of factory space, and plenty of space for you to customize living spaces. With the new blueprint snap, adding additional modules (coming soon) will be a breeze and seamless to help make your space experience more immersive. All future modules will have connection points with transition stairs or walkways to make moving between cores easy. Moving to space starts here See it in VR at "Czar in Space Showroom" Dispensers are there too

In the process of moving, blueprints are available to Kosmos Exchange. Get into space quickly and easily with this S core space station. Whether you're new and want to give space a try or a veteran needing to set up a refueling/storage station in orbit, this is for you. Plenty of storage space, room for some industry, clean control center/small hangar and landing on top. Need More landing space? Add on landing pads available. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

This mining factory is suitable for 8 Mining Units and 2 M Size Container or 1 L Container for Ore Storage. Build on cheap rescources it can be almost hand-crafted in your Nanocrafter. The blueprint do not contain any Mining Units or Containers. Feel free to place yourself. Get your blueprint at the dispenser. If you want to have the honeycomb and elements too, have a look on the second dispenser. You can also write me an message if blueprint is not available at the dispenser

XS Core Bunker. At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} More Comming Soon!

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO