Dual Universe Creators

For reference, please also see "Anisoptera v1" on this website (the previous version, internal code name: "Poor Man's Speedboat"). The Anisoptera V2 (internal code name: "Businessman's Speedboat") is the latest version of this famous dragonfly-alike designer speedboat. The original designs called for a fast boat that could fit many different types of ship hangars, thus the resulting conceot was that of a very slender ship hull. That in return resulted in a low drag amount and therefore high possible speeds if powered asequatly. The version 2 has the following improvements over V1: - on-board storage (1,000 l) - even higher speed - longer flight duration - slightly increased wing lift capacity - more airbrake power - more forward engine braking power - more fuel capacity - easier access to fuel tanks And the best is: from the outside there is almost no difference! NOTICE All versions avalable: - NEW! Anisoptera v3 (suborbital superspeeder one-seater) - NEW! Anisoptera v3 (suborbital superspeeder two-seater) - Anisoptera v2 (atmospheric speeder one-seater, THIS version) - Anisoptera v1 (atmospheric speeder one-seater, Poor Man's edition) AVAILABLLE NOW FOR A LIMITED TIME ON "Tropico" (VR), ALIOTH

Build by Knight-Sevy#6239 The TIE Advanced x1, or TIE/ad, was an advanced starfighter that was part of the TIE line manufactured the shipbuilding industrie of Sentinels. Contact : Knight-Sevy#6239 It is built in such a way as to be as close as possible to the real scale while adding the "DU" dough and as details as possible. Real cockpit and accessible through a hatch at the top. Sold with 800 l of fuel and 400 T3 ammo XS. The TIE Advanced X1 is ideal for training space combat in Dual Universe with friends and it got the same stats than our X-Wing so you have the choice ! You need "Control Unit Capacity Handling" at lvl 2 to use the 2 laser (Weapons => Seat Capacity Handling => Control Unit Capacity Handling) And then apply them on your construct (Right clic => Construct => Reapply talents on construct) BP dispenser located on Moon 4 at - ::pos{0,22,-24.0681,158.4720,64.3307} To view in person, visit VR: " SNS Showroom Public DSAT" https://youtu.be/laLS_bgT_Hw No talent max stats : 6.25g MAX THRUST 10g BRAKE FORCE 34m² Frontal cross section 49 838 km/h MAX SPEED

Do DO Be DO - The iconic pocket ship has returned ! (Lasor not included! I'm not Evil) That's Dr not Evil thank you ....

Designed as a High Altitude Atmo only Cruiser. Medium wings allow for low sustenation speeds. Current build has uncommon military atmo's. Pocketable and steady flyer. Come check it out at Phalanx Showroom 9km west of District 6 Market next to The DOME!

The Nephilym is the "little brother" to the Infinity Corporation Behemoth hauler. Armed with 8 medium railguns, and 1-3 meters of steel armor, you can safely transport up to 5000 tones from the ground to space. Large Rockets will get you to AGG minimum height on Alioth with up to 5000 tones. This ship makes a great Missions runner! NOTE: the token cost reflects the current best market value of all the elements as of 11/4/2022

I am pleased to present you all the first of my release builds, the Danube Class Runabout. In a future update I will be supplying add-on mission S cores with flexible configurations. This base model has 5 L Atmospheric engine slots and 4 L Space engine slots along with 2 supporting M space engines. Multiple hardpoints for weaponry both fore and aft mounting. Can be used with or without rocket engines or L shield without changing the look of the vessel. If requested, a custom registry plaque can be affixed to the fore section. VR to "Danube Class Runabout" to see it for yourself! All stats are based on talents of level 4+, talents can be applied upon request.

Phantom is my first M core art build. It's built out of carbon fiber to keep the weight down, but also to give it this cool chromish look. I haven't even made a proper video on it, but here's my first version of it and first test flight: https://www.youtube.com/watch?v=A9YNFEVcSoM (on this video it's not complete, it's missing warp and some wings). INTERIOR: cool looking interior, with bridge/cockpit, 2x crew quarters and cargo area. cockpit has switches and lights that will let you turn stuff on/off and lights will indicate what's on/off. fuel tanks are also nicely places behind hatches, which are opened by a switch and lights turn on, in other words, i put some time into designing the interior. one crew quarter is pretty much empty, so you can make your own design in there. FORWARD ENGINES: 12x L basic atmospheric engines and 4x L basic space engines NOTE - cargo capacity and lift are not absolute and are easily modifyable! I made it as art-build, but it performs quite well as hauler. currently it only had 4x L containers, but you can easily easily put more containers. I think you can quite easily fit +6 to 8 L containers into it, so total of 10-12 i'd say. there's also some room for more wings if needed, only problem with heavy loads might be hovers. I have tested about 2000t and it had absolutely no problem lifting it with low level talents (level 2-3). if you have "heavy foot", you might want to put L space fuel tank on it, because i have M only and it runs out quite fast if you're hammering it. with full tank, it's enough to make a round trip from plant to planet, so in other words, it can escape atmosphere twice, but with cargo it might be an issue, so have some extra fuel or get L space fuel tank. You have to land anyway, so i see no harm in refuelling in meanwhile. I'm not very happy with some voxel work outside as there's a bug where voxels look fine in build mode, but when i exit build mode, they twist into something else. it's hard to fix those as in build mode it looks fine, so i don't know what to adjust, but otherwise it's fine.

The Hyaku Choxie was featured in the official launch trailer! With considerable screen time, to boot- 10/2023: The Hyaku Choxie is available again on Haven! See my new workshop through VR at "Choxie's workshop" Visit the store on Haven, ( ::pos{0,27,-80.8401,89.2208,241.0850} ) BSW's first commercially successful model, the Hyaku Choxie is a multi-role S-core ship inspired by Quatro Bejeena's MSN-00100 Hyaku Shiki mobile suit from Yoshiyuki Tomino's 1985 masterpiece "Mobile Suit Zeta Gundam". The original Hyaku Choxie was composed of gold voxel. The III-B type is made of cheaper materials such as polished yellow steel and aluminum, effectively saving on weight and cost without a sacrifice to looks! Features: -Fully detailed luxurious interior with passenger seats and navigator seat. -Quality-of-life LUA scripts including Navigator HUD, Damage Report, Warp Map and Inventory control. -An array of lights, all on toggle switches, set to imitate real-life aircraft; landing lights, indicator lights at the wing tips and tail, headlights, cabin lights etc -1 L-size container (can provide lvl 5 container handling talents), tested with 179kL of hematite (over 750t) -Overtuned with excessive atmospheric and space thrust, as well as lift. Meticulously balanced adjustors and elements by our in-house engineer guarantees a smooth flying experience. -Warp Drive This ship's design philosophy was to cover as many bases as possible, to be an everyday ride and a cost-effective warp-capable shuttle. Able to carry passengers, a moderate amount of cargo, and light enough to be cheap on warp cells, this ship is ideal for solo freelancers or small operations looking for a general purpose machine. Check them both out at VR station: "Choxie's Workshop" Feel free to contact me on Discord, I am in the official DU and DU-creators channels. If you interested in purchasing blueprints, here is a fast way to get to my base (If you're on Alioth): -Go to any of the Alioth districts with teleporters, and teleport to district 9. -Take the shuttle to Haven from District 9. This will put you at Haven Market 9. -My base is about 35km south of Haven District 9.

The DragonFly MK1 Modeled from STAR CITIZENS DRAKEs Dragonfly. This hybrid is perfect for light market runs. This lil guy cruises @ 1700 kph with 5% atmo and 1300 kph on ground level. Will travel and work well on a Moon. Come grab ya one. VR Station name "BooNDocK Customs" @ Infinity Corporation Spaceport ::pos{0,2,7.8000,80.4210,89.9976} ****OR**** VR Station name "BooNDocK Main Showroom" ::pos{0,2,-25.9879,106.3613,5.8710} IGN: xSKeeVx OR Discord: Skeev#3940 IGN: Bananer OR Discord: Bananer#0773 (SHOP PARTNER) Contact me for possible trades in partial payment. Willing to Barter ORE's, Component's OR Quanta.

Please Find the Brand New Morning Star, A product of Outer Rim Expedition made by TiWill33. This M core ship is a Hauler, that can handle 3,5 kT of Alioth to space Our Team is proud to announce you that the new Shop will open near Market 6 ! Token already available contact TiWill33 on discord ! : Tiwill33#5273 SHOP : ::pos{0,2,33.0203,117.0489,-23.3137} VR : OUTER RIM SHOWROOM You still can find us at Market 12 of course !

Seawing Hypersonics presents the S32 WAVESPLITTER. An ultra-light ultra-affordable Mach 8 hauler/market/mission runner designed to be the fastest point-to-point transport on Alioth. Fall in love with flying over Alioth all over again with a wavesplitter at your command~ All stats shown in the attributes are with lv0 talents. Lv4 Talent performance shown in screenshot. The S32 was and is the test platform for our flagship Moltres Shield™ technology. Specialized flight instruction recommended for new owners, contact seller. Find us on VR at 'Seawing Hypersonics'! //UPDATE Dec 1, 2022// New H model available with added third S container and two additional Hover M's, more than doubling the payload capacity to 250t! //UPDATE Dec 4, 2022// S32 cargo pod now developed, tripling the original ship's capacity to 90kL! Free bps included with the S32