Dual Universe Creators

L core Static Statue of a pretty Lady on the Beach for myDU 260k Marble voxel Full L core size. https://drive.google.com/drive/folders/1yCTheMroiOu6hF4MHFkQ50AvXtcQAoVl?usp=sharing Low cost 174k Aged Silicon voxel Full L core size base hollowed out https://drive.google.com/file/d/1XyeiWYFWmf8TOKWEIQGhMOlsDSTF7eFK/view?usp=drive_link

makes all the basic elements and XL uncommon space engines ,vr MAGIC ELEMENTS FACTORY . location: ::pos{0,2,40.7473,91.6040,93.7875}

The CCU Crane Set. Do u need a crane for your heavy lifting jobs? Then CCU has a very nice and modular crane for u. This heavy duty crane will make any lifting a piece of cake. It has a turning radius of 0 ( cause DU dos not allow us to ) It can lift up to any amount ( tested at 100KT ) Cable length - as long as u can make it. ( keep it responsible ) Get your crane today ! U can visit us in VR at - CCU Voxel library Or in person at our location - ::pos{0,2,34.7581,72.5932,-0.0001} (Alioth) Fun intended. But have a great day Novean ! P.S. To be able to use a heavy duty crane u need a special permit and license. It is not possible to hire a specialist crane operator.

Derrick (Nodding Donkey, Pump Jack) Mining Unit. Holds 4 Mining unit L. 1x L container with Hub. Screens and board for Lua. Space underneath for Ore Collection. Comes with 4 Basic MUs, 1 L Container, 1 Hub, 2 Screens, Prog Board, Vr Pod, lights etc.. Most Voxels in Iron. All Basic Stuff

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

The goal of the Alioth Hyperloop project is to connect various space elevators and towers to the markets via an underground tunnel and train system. Enabling efficient movement of large cargo to and from space and markets. Over 150km of tunnel has already been constructed demonstrating the movement of 1000tons 60km at 500kmhr for 100L of fuel. Now seeking partners, investors, - for - Public Relations and advertising, purchasing or leasing land, and construction of stations and tunnels. Also seeking landowners and tower or elevator operators who would like the convenience and profit of having the Alioth Hyperloop through their territory. VR demonstration track and self driving train - coming soon!

This L Core Silo is great for extra storage space with room for 10 Expanded XXL containers. Place this in the middle of your flower and start filling. Room for parcels containers and more. You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

In the process of moving, blueprints are available to Kosmos Exchange. Get into space quickly and easily with this S core space station. Whether you're new and want to give space a try or a veteran needing to set up a refueling/storage station in orbit, this is for you. Plenty of storage space, room for some industry, clean control center/small hangar and landing on top. Need More landing space? Add on landing pads available. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

- A large core outpost building, with landing pad for medium core sized ships. - A platform to set up your mining operation on 3 adjacent territories, for convenient access to mining units and storage from a single location. - Storage: 6 Basic Containes L (2 per territory totalling 384 kl when fully buffed, more can be added) - Placement space for 12 mining units (4 per territory) 3 blueprints are provided - one for the main large core building, and two additional small core constructs that integrate to the main building. It is important and strongly advised that you refer to the Deploy Setup Manual, as precise deployment of the 3 BPs is essential to enable miners working properly on the 3 territories. Get the manual here: https://drive.google.com/file/d/1VQ1bRl1KgdTca1cO-hZctLboFwJC_NwA/view?usp=sharing Material list: https://docs.google.com/spreadsheets/d/1fYWNOhXSlhMM0Ky4PHIrxpxwJlIues0a5YV4HOhcObg/edit?usp=sharing VR: DSPI Outpost Sales dispenser: ::pos{0,2,41.7116,89.5775,34.7921}

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

This mining platform was designed to mine up to 4 ore types using L mining units. While the mining platform will default to one mining unit per T1 ore, this can easily be changed to mine different ore with upgraded mining units. To expand the number of mining units, just link to the additional units to the mining PB and to one of the containers. To modify the ore type, rename the container element and replace the ore with the new ores full name. Adding/modifying the mining units or containers will require the programing boards to be restarted. This is an early release version of the platform, so some of the items have been reduced or removed due to availability or cost. To further save on deployment cost, you can change the honeycomb type to fit your available ore type.

This M core build is the perfect starter base. Plenty of room for factories, XS ship storage or a cosy house. Simple yet effective detailing. Orange steel highlighting looks great in any colour. Version 2 has been replaced with easier to craft materials. Contact: Actimist#4020 Primary designer: culphy Contributors: Actimist Factory worker: Location: Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941} Search "NovaX Estates [Ships & Builds]" in the VR terminal to find us in-game.

Welcome to Digital engeneering Are you someone that like to do LUA, but do not like to build? Or you just need a nice building to work in with your LUA scrips, and then show a new script for the consumer? And even sell the scrips on the main floor. Then is something for you.

PYRAMID AMMO FACTORY RGEAMS This factory makes a ton of ammo! makes 4 types of rail gun ammo: M and S and L* electromagnetic and antimatter produces approximately 2500 S and 1500 M per day depending on your talents. we also make custom ammo factories. 5 mil down 5 mil on completion Since launch *THIS FACTORY MAKES ALL THE NECESSARY PARTS FOR L AMMO TOO. JUST PLOP AN L ASSEMBLY LINE DOWN AND LINK FROM THE APPROPRIATE CONTAINERS. I CAN HELP WITH THIS UPGRADE IF YOU CONTACT ME. READ OUR BIO FOR MORE INFO