Dual Universe Creators

2B Designs Hangar L Core Size Hangar - Plenty of Workspace - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - Good Size Landing pad - Elevator / Hole Access to floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) VR: "2B Hangar 2B01 Display" For a display of the Hangar Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

Small Core Basic Containers Factory with a configure and start script Production per day with no talents. 240 Basic Container XS 60 Basic Container S 16 Basic Container M 8 Basic Container L 4 Basic Container XL 2 Basic Container XXL All machines have signs for your convenience All Screens have custom edited scripting

I proudly Present the Wydee-Design warp cell factory! The warp cell factory can produce 188 warp cells a day without any talents and goes up to 240. Put the ores on the input HUb on the control room at the entry of the factory and everything is being produced for you without any action to do. Everything is well designed inside and organized in a very clear industrial layout. We bring to you lean and visual management. Production behavior: - There is enough container storage to handle a complete week production - The consumption for a week is the following: - Bauxite ~48k - Hematite ~24k - Coal ~63k - Quartz ~91k - Malachite ~18k - Limestone ~35k - Natron ~14k - Pyrite ~12k - Petalite 2.6k - Acanthite ~14k The required schematics to make this run for a WEEK are the following: - Pure product schematics P2: ~1170 - Pure product schematics P3: ~ 500 - Product schematics P1: ~1750 - Product schematics P2: ~350 - Product schematics P3: ~ 210 - Warp cell schematics: ~ 1400 All those numbers are the minimum required (with a buffer included) to make the factory running for a week with: - no talents on speed increase for production - talents lvl 5 pure P1 - talents lvl 3/4 pure P2 - talents lvl 3/4 pure P3 - talents lvl 1/4 on basic products (polycarbonate / polycalcite / polysuflide / alloys (Al-Fe, Cu-Ca-Cu-Ag / Glass (basic, advanced, Ag-Li) If your talents are a bit high than this increase the capacity to make a full run for a week by 10%. Those numbers are mentionned on the screens inside the entry hall where the materials must be inserted in front of each Hubs and maintain rules are also mentionned. To deploy the factory the entrance is in front of you when you deploy it. For BP come to see me on Haven @ ::pos{2,27,27.7968,346.8901,40.2505} or contact me on discord JamesWydee (james78650)#9448 Token are not available for now: depending on the demand I will organize myself for make those available when my talents are going to be updated to LVL 5 (in one month would be available). Come to see the factory by VR @ Wydee_ShowRoom

Warp Cell Cube Design inspired by the famous Mario Bros Warp Cube, this XS Core is packed to the bone with industrial machines and design to have a production capacity of 520 warp cells per day, needing only to feed with the 10 ores required for warp cell production, Pure Hydrogen and the 6 schematics needed for warp cell production. Features: - Capacity: 520 warp cells per day with moderate T1/T2 production talents - Feeds from Ores and Hydrogen, so no need for additional machines (refiners e.g.) - Easy setup: when powered on, all machines will be calibrated to produce the right amount of intermediate products to feed into the 16 Glass furnaces for Warp Cell production - Easy maintenance: elaborate monitoring screen, showing the status of each (sub)assembly being produced as well as the inventory levels of the Ores, blueprints and Hydrogen. - Token available on request, please do expect some time needed for the production of the machines - Support during setup on request (although should work straight from the box) No more need for giant setups for warp cell manufacturing! This XS core is probably all you need for your personal warp cell needs! Location for watching the cube in action: ::pos{0,2,7.7358,80.4968,220.3335} visitable in VR though: Warp Cell Cube Demo

This M Core Factory Shell will fit Tier 1-3 ore refiners and product plus assembly lines. Fits 1 XL Assembly lines. 1 basic or 1 uncommon. Plus a mix of any lines you want. Makes organizing your production easy. Room for all your containers in the ceiling. BP Requires M Core 1 Basic container XS (schematic container) 1 Detection Zone M 4 Elevator XS 1 Relay XS 2 Screen XS 2 Sliding Door M You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000} 6 Square Light M 6 Square Light S 9 Vertical Light M 7 Vertical Light XS 4 Window M

BP dispenser located on Alioth at ---> ::pos{0,2,24.6416,120.5044,3.8850} That building is in an L Core. I don't like the huge factory blocks at all, so I took an L Core and gave myself free rein in the dimensions and design of the building. From my point of view, the entire core does not always have to be used. It is important to me that buildings fit in well with their surroundings, be it in the city or in the country. The building is an empty shell! Setting up the factory or your office in the building is entirely up to you. Below the asphalt there is enough space for you to build your own cellar with containers and industry. you can find the core in the center below the floor if you have any questions or suggestions for improvement, please let me know! VR: "Calpone Showroom" dispenser ---> ::pos{0,2,24.6416,120.5044,3.8850}

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

Similar to Pad A, but without the pillars. Designed to be floating in the air with AGG like voxels One interior level for storage / industry / whatever Can be seen at Aerogics Haven HQ *** Honeycombs *** Aged Brown Pattern Wood 3: stairs banister Galvanized Gray Iron: landing area Glossy Blue Plastic: lines on landing area Luminescent Icy Blue Glass: AGG voxels and outside lights Luminescent White Glass: inside lights Matte Light Brick 1: main HC Matte Black Brick: secondary HC Waxed Brick 2: tertiary HC Polished Brown Wood 2: stairs steps Polished White Aluminium: metal struts

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

Are you looking for a space adventure that combines comfort, productivity and security? Then look no further than the SKY Aegis Multi M core space station from SKY Industries! This is the ultimate space home for you and your crew, featuring: - A spacious and cosy living area with a panoramic view of the stars - A fully equipped office space with high-speed communication and data storage - A small factory area that lets you craft and repair your own equipment and vehicles - A XS core elevator dock - 4 M core doble landing pads The SKY Aegis Multi M core space station is designed to be modular, customizable and expandable, so you can add more pads to form a larger base. The SKY Aegis Multi M core space station is available now for only 4.3 million! VR: SKY Aegis Alioth Station Visit ::pos{0,2,54.7335,109.8047,69.0288} to get your Blueprint today!

In the process of moving, blueprints are available to Kosmos Exchange. It's Honeycomb...in space! No longer will you need to make element only ships deep in space, put some voxels on it and style that thing up! PvPers, come on, put a skin on that naked hot dog you're shooting with. You can even dress it up as an actual hot dog with the right voxels at your fingertips. Factory is built on my Fidget station technology and features T1-T3 honeycombing capabilities. Easy to use LUA control for the honeycomb machines (html needs to be enabled for T3 due to a technical issue with Aerogics honeycomb script so using SilverZero's older script that still works like a champ). Come see it in VR at "Czar in Space Showroom" either fly outside or head to the small unmarked door on the end with the landing pad sets. Located in person here ::pos{0,0,-41989.3752,202219.7557,33651.8498}

PYRAMID CANNON AMMO FACTORY XSSMLTK: Need cannon ammo? Need a lot of it? This factory makes 8 different types of cannon ammo! XS, S, M, L kinetic and thermic makes 1000's of rounds per day! low build cost (approx. 6mil) we sell everything needed to build our factories on site. Happy hunting! read our bio for more info:)

50% off blueprint price at the moment on dispenser This is the standalone outpost style pad, built on a large core placement rules are just 3 clicks down when your blueprint is flush with the core your stood on once you have it lined up, if your flush on soil/ground just do 2 clicks down you can view at the location written on the right of the screen or view in VR search for loaded industries showroom and your find the structure at the end of the runway, dispenser is located on the structure any question please message me on discord

Dry Dock LC-01 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

This is a one large core showroom, one big open space with viewing balcony this was made from the panel showroom kit, has small enternace and large enterance and has a flat roof for easy parking, comes with detailed panel flooring and sign space to add lettering/logo, i havnt placed any glass panels in this building as i see no point as they are totally clear now, they lost there blue tint in last update, you can get complete honeycomb kit aswell at my location for easy hassle free deployment when placing its 1 click down if your stood on another cores voxel when you deploy the blueprint, no need to do the 1 click down if your standing on the ground and the small enterance is facing you when you deploy the blueprint any other questions please dm me on discord loaded#2378