Dual Universe Creators

Full L core space station perfect for your space factory. With 4 landing places (M cores) that perfect Align with the main factory. I can help install everything. The inside is empty. Discount if u buy more 2 for 15 mill 3 for 20 mill 4 for 25 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

Introducing the Soltac M-core Mining hub. Ideal for use as central storage and processing facility for your resource flower, or as a standalone base of operations -6 floors of factory space to accommodate small scale refinement and production. -4 external mining pods, each capable of holding 8 L mining units -Subterranean surface ore collection area, with quick access elevator to mining pods -Storage Hangar can support up to 40 L-containers(4 included in BP for ease of deployment) -Dedicated PB for each pod running mining calibration LUA -4 empty PB for any additional LUA needs For a closer look visit "Soltac Mining Hub M" in VR Installation instructions: There are two orange guidelines to help ensure proper placement 1) Flatten terrain 2)Place structure, lower into ground until upper orange guidline is no longer visible. Refer to photos on this ad for proper depth. 3) Excavate central pit, use the outer walkway as a guide. Use smaller shovel size near outer walls to avoid disturbing flattened terrain. 4) Excavate interior rooms, again use smaller shovel size to avoid disturbing flattened terrain 5) Excavate storage hangar and surface ore collection room. There is an orange guideline dictating floor height.

A fancy mining rig on S core: 4 mining units, one container L and one VR node.

Decorative Element drm free VR "Alioth Marina"

We Create Voxels presents "Diglett" - a voxelised rendition inspired from the original Pokemon series. Available in both Static and Dynamic blueprints, Diglett is a hollow hull and makes the perfect mining outpost for Pokemon fans. Available for purchase at: ::pos{0,2,36.9091,101.8558,144.5942}

Greetings! I present to you a warp cell factory that produces 540 cells per day. This factory is on a Medium Space core, made with an easy to understand layout and is fully automated. Just put in the ore and it'll do all the work itself. I am offering 3 packages: 1 - Blueprint only, 20m Quanta 2 - Blueprint + Buffs/Help setting up, 45m Quanta 3 - Token + Buffs/Help setting up + Ore/Schematics Provided, 75m Quanta

Large core easy to place landing pads very detailed and also very easy to change the colors! The style is setup for the steel and the lum glass to be swapped to different colors to create a color pattern for any area DRM is locked as this is how i fund my habits! VR ADMI Deluxe Temporary to look at and locate on alioth will have a proper store here in a bit after i make more money lol. Located 50ish km from market 13 at cords ::pos{0,2,-24.6313,16.7490,95.7777}. Thanks for looking! I have made roads that are very easy to place and dont get in the way of taking off! will have more styles later.

Derrick (Nodding Donkey, Pump Jack) Mining Unit. Holds 4 Mining unit L. 1x L container with Hub. Screens and board for Lua. Space underneath for Ore Collection. Comes with 4 Basic MUs, 1 L Container, 1 Hub, 2 Screens, Prog Board, Vr Pod, lights etc.. Most Voxels in Iron. All Basic Stuff

This M Core Factory Shell will fit Tier 1-3 ore refiners and product plus assembly lines. Fits 1 XL Assembly lines. 1 basic or 1 uncommon. Plus a mix of any lines you want. Makes organizing your production easy. Room for all your containers in the ceiling. BP Requires M Core 1 Basic container XS (schematic container) 1 Detection Zone M 4 Elevator XS 1 Relay XS 2 Screen XS 2 Sliding Door M You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000} 6 Square Light M 6 Square Light S 9 Vertical Light M 7 Vertical Light XS 4 Window M

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

Brand new space station. This station is build for factories or to get storage in space up and running in a nice shell. Under the floor there is a lot of space to expand with expended xl containers. New players get a big discount or free. And if you need more stations then i can also make a special deal for you. Message me on discord on Jasper_1. Check it out at VR: Space station shop

The plan was to test out how to make a space station about 65KM from the planet. Assuming I'd succeed the idea behind the station was to use it for making fuel and basic scrap without having to land on the planet. So I obviously succeeded at making the space station however, the location was completely wrong for the job. It turns out you need to make the space stations away from where your bases are and stock them with resources you need at those locations. That said it was fun doing it for the first time and the views are super.

50% off blueprint price at the moment on dispenser This kit will allow you to make any size hangar you like over as many cores as you like just like my landing pad kit and you can take this kit any where ground or space, there are endless possibilities with this kit, when using the kit there are some thin voxels on parts of the design like bolts etc make sure you grab all when copying, there will be some small patches you will need to fill on roof due to the angles there is also a limited offer at my location aswell for this blue print with the pre built hangar blueprint any questions please dm me on discord.

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

50% off blueprint price at the moment on dispenser This showroom kit will allow you to build any size showroom you wish to house as many ships as you like, its very easy to do just like the hangar kit, its panels are also same size as the hangar kit so you can even easily decorate the outside walls of your hangar with this kit or even be creative and mix and match, everything you see in the pictures of these buildings are in this kit the only thing you have to do is fill the empty space on roof and make your own link from the balcony curve which is all very easy, also comes with a detailed floor panel 50 x 50 voxles in size for very easy placement which you can use in any of your other buildings you may own. you can with a bit of time change the mats of all the panels to suit your colour of choice endless possibility, you will also find what i call end caps to finish off parts that are left open from your build can view in VR search loaded industries showroom any questions please dm me on discord loaded#2378