Dual Universe Creators

Static construct for mining units. DRM FREE S core 3 L container for up to 576kL. (lvl5 container skill) Over two weeks storage of mining an 600L/h T1 Field. Space for 12 mining units and 2 reinfocred sliding doors (Not included in BP) Containers/Surrogate etc. can be removed after placement with no impact on design. Could also fit forcefields (prepared on 4 sides) if you need ramps. Room for custom voxel letters on 2 sides. (See picture, BP is blank) Shopping List: S Core (Nano craftable) Ressurection Node/ VR Pod VR Station (Nano craftable) 3L Container + Hub 94m3Orange Plastic (Nano craftable) 408m3 Gray Plastic Visit my VR on alioth. VR: Hadron HQ Alioth

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

PYRAMID OF KHUFU PERFECT SCALE REPLICA OF THE GREAT PYRAMID OF GIZA LARGEST POSSIBLE ON AN L CORE PERFECT 3-4-5 TRIANGLE 20,000 M3 VOXELS 2 ELEVATORS 50 M3 LUMIN GLASS THERE IS AN OPENING ON THE LEFT THAT ALLOWS EASY ACCESS FOR BUILDING WHICH CAN EASILY BE CLOSED WITH THE LINE TOOL. THERE IS ALSO A SECOND CAPSTONE INSIDE NOT MADE OF LUMEN GLASS TO AID IN GETTING CREATIVE WITH THE COLORS THE PYRAMID TOP CAN BE.

Originally called the 'Fortress Refinitorius' in Beta, this Star Wars Inspired build was quite fun to put together. Suited for many terrains or off-shore, this themed mining platform makes a great personal HQ/factory as well. FEATURES: -Height gives options for what level above surface you'd like the main structure -Imposing and intimidating presence of Sith (Vader's) technology built into the outer façade. -Uniquely designed factory floor -Large open cargo container storage area -Personal living quarters -Throne Room -Conference Room -Balcony -Mining Units (at max height, reduce if surface ore fails to spawn after calibration)

Decorative Element 20 Voxel Diameter drm free VR "Alioth Marina"

We are also located at the Alioth Exchange in the Red Isle I am at it again with more factories!! Are you a Space Only Person and would like to just make your own Space Cores without the cost of having to buy a core factory that makes them all???? I got you!! This Space Core Factory produces all size cores This is what it will produce every 24 hours with no industry talents XS Space Cores---720 S Space Cores-----60 M Space Cores----4 L Space Cores----0.7 For any questions, please reach out to me on Discord We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

This will make 55 different elements to help you along your way of ship building. This factory has my most updated labeling screens, scripts and every industry is labeled by the Tier of parts or products it makes.! Adjustor XS- x2880 Adjustor S- x720 Adjustor M- x180 Adjustor L- x45 Aileron XS- x360 Aileron S- x90 Aileron M- x22.5 Atmospheric Airbrake S- x720 Atmospheric Airbrake M- x180 Atmospheric Airbrake L- x45 Atmospheric Fuel Tank XS- x720 Atmospheric Fuel Tank S- x180 Atmospheric Fuel Tank M- x45 Atmospheric Fuel Tank L- x11.25 Atmospheric Radar S- x60 Cockpit Controller- x45 Command Seat Controller- x180 Compact Aileron XS- x720 Compact Aileron S- x180 Compact Aileron M- x45 Databank- 2880x Emergency Controller- x320 Gyroscope- x720 Hovercraft Seat Controller- x180 Landing Gear XS- x960 Landing Gear S- x80 Landing Gear M- x20 Landing Gear L- x5 Programming Board- x720 Remote Controller XS- x320 Retro-Rocket Brake S- x720 Retro-Rocket Brake M- x180 Retro-Rocket Brake L- x45 Rocket Fuel Tank XS- x20 Rocket Fuel Tank S- x5 Rocket Fuel Tank M- x1.25 Rocket Fuel Tank L- x0.31 Space Fuel Tank XS- x720 Space Fuel Tank S- x180 Space Fuel Tank M- x45 Space Fuel Tank L- x11.25 Space Radar S- x60 Stabilizer XS- x720 Stabilizer S- x180 Stabilizer M- x45 Stabilizer L- x11.25 Vertical Wing- x1152 Warp Drive L- x1 Wing XS- x720 Wing S- x180 Wing M- x45 Wing Variant M- x45 Wingtip S- x1152 Wingtip M- x1152 Wingtip L- x288 VR: "VO Factory Sales" Discord Name: theOmega28.36#1869 Discord Channel: VO Industries I stand behind all my factories. If you have any issues please reach out to me and i will be more than happy to help resolve any questions or issues you may have. If i do any updates to any factory you already have, i will upodate it at no cost to you. I have a discord for VO Industries that you can join to help keep up with updates and future factories along with support tickets and other factory related topics!

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

In the process of moving, blueprints are available to Kosmos Exchange. Space!!!! It's got electrolytes. It's time to upgrade from that voxel thick landing pad with containers strewn about? You'd like some style? You like furniture from Ikea? Look no further, I've got you covered with the new modular series of stations offering you usability and looks in one package. This station features ample landing and hangars for XS-M size ships. A big pass-through hangar for building or parking up to M core ships, 3 XS core hangars and 3 wide XS-S hangars. In addition, there is a ton of storage space, about 2 M cores worth of factory space, and plenty of space for you to customize living spaces. With the new blueprint snap, adding additional modules (coming soon) will be a breeze and seamless to help make your space experience more immersive. All future modules will have connection points with transition stairs or walkways to make moving between cores easy. Moving to space starts here See it in VR at "Czar in Space Showroom" Dispensers are there too

Introducing the Soltac M-core Mining hub. Ideal for use as central storage and processing facility for your resource flower, or as a standalone base of operations -6 floors of factory space to accommodate small scale refinement and production. -4 external mining pods, each capable of holding 8 L mining units -Subterranean surface ore collection area, with quick access elevator to mining pods -Storage Hangar can support up to 40 L-containers(4 included in BP for ease of deployment) -Dedicated PB for each pod running mining calibration LUA -4 empty PB for any additional LUA needs For a closer look visit "Soltac Mining Hub M" in VR Installation instructions: There are two orange guidelines to help ensure proper placement 1) Flatten terrain 2)Place structure, lower into ground until upper orange guidline is no longer visible. Refer to photos on this ad for proper depth. 3) Excavate central pit, use the outer walkway as a guide. Use smaller shovel size near outer walls to avoid disturbing flattened terrain. 4) Excavate interior rooms, again use smaller shovel size to avoid disturbing flattened terrain 5) Excavate storage hangar and surface ore collection room. There is an orange guideline dictating floor height.

drm free VR: "Alioth Marina"

Can produce atmo & space fuel and several honeycomb materials, depending on ore provided: Brick, Carbon Fiber, Wood Plastic, Steel, Silumin Aluminium, Iron, Silicon, Carbon 4 Hubs for storage: Ore (input) Refined Materials Products Fuel & Honeycombs (output) Storage: 4x Container M on blueprint to make it easier to spawn, can go up to 6x container L total Best used on a tile with all t1 ore and one t2: with mining units it will auto produce both fuels & all T1 honeycombs Comes with several Aerogics scripts configured plus the excellent Jericho Industry HUD https://github.com/Jericho1060/DU-Industry-HUD Screens on every machine to help with first run configuration, it won't take more than a couple of minutes to have your own refinery running!

my little entry for the NQ Build Your Legacy contest, only started last week so not to long on the build but im happy how it turned out which is pretty hard putting detail together with the rules of no more than 700 meters of honeycomb, comes with lobby, office, living room, bedroom, bathroom and storage area for ship parts, ive always built large core buildings but ive enjoyed playing around constructing a building this size with compact rooms that have a true feeling of space for the size of our avatars, i will look forward to doing more on release :)

This will make 45 dispenser every 24 hours with no boosting talents We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

12 Large (static) core runway 2x6. full built with skirt runway is all at the top of the cores so can make skirt taller if desired to put stuff under it. Will be making another much larger version in the future after i make more quanta! vr Admi build store or visit at ::pos{0,2,-24.6842,16.8702,151.5735} runway is outside the landing zone for display will eventually put the landfall pads around it as they are built for it. Thanks for looking and buying and all that stuff!!!!!