Dual Universe Creators

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

In the process of moving, blueprints are available to Kosmos Exchange. Space, it's got all that and the chips! L Core Space Factory shell. Lots of space to make your factory look pretty cool. Getting tired of stacking machines your machines on voxel landing pads? Well stop doing that and factory in style. Tons of hidden storage space. Easily see your machines, lay it out as you like. Center command platform with multiple levels and even decorative hangers (hydroponics look is my set up). Modular set up makes it easy to set up with additional modules including hangars, landing pads, storage modules, elevator modules and more. Come see it in VR at "Czar in Space Showroom" or directly "Czars Space Factory" Dispensers located here ::pos{0,0,-42090.7405,202368.7623,33445.6155} (Please note that VR and in person is an active factory and may have changes made that are not included in the blueprint, please ask if you have any questions)

A wall made of 3006 animated lights on a dynamic core to welcome visitors :) You can see it here : ::pos{0,2,-23.9491,-10.5283,119.8070} (Yentico base in front of Alioth Market 13) To visit in VR, search "Light Wall" Peace - YesmanDu974

UPDATE now available in new release. Just came back to the game, prices may be negotiable contact me in game or on discord Vazrik#6937 *4,000,000 per core, Not including materials. Recommended Galvanized gray aluminium and Luminescent White glass. 4100 honeycomb single voxel thick per core 8200 honeycomb double voxel thick per core 1 L core per core Roughly 200 Luminescent glass per core (may vary but its a good starting guestimate) *Custom built to match your current setup. *Accurate runway measurements and markings(doubled in size to increase visual and utility) *Recommended at least 16 cores in length, 13 cores in length is minimum for this design. Redesigns are necessary for anything smaller, this may be possible to achieve but will be at additional cost. *Can add taxiway's or possibly parking pads if needed, should be no change in price per core depending on the request.

putting big L core stations together is fine but when you want to break up the monotony, give this connector module a whirl. Still an L core but a little smaller to add some depth to your modular stations. Features a nice throughfare windowed walkway to transit between cores and also look out over the 10 XS sized landing pads. Check it out in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42319.9264,202282.6245,33492.4846}

PYRAMID FUEL FACTORY: MAKES FUEL, AND A LOT OF IT MAKES; NITRON 600KL PER DAY KIRGON X1-X4 300KL PER DAY OF ONE OR APPROX 75KL OF EACH EASY TO SET UP, EASY TO EXPAND STORAGE WE NOW HAVE A MODEL THAT MAKES XERON TOO 100KL PER DAY same price READ OUR BIO FOR MORE INFO

This Large Warp Cell Factory will produse 1440 warp cells every 24 hours with no industry boosting talents It 5 time more in production then my M core warp cell factory I do not have this up for display. I built this for a customer that supplied the industry for me to build. I tore it down for him to pickup after i completed it. This factory is built in my L core Factory Shell. Has plenty of room to add more into this building as you desire. For future reference if you add more into this factory and decide to move your location, i will create you a bp of it under certain circumstances: i would need to see the factory before you tear it down as i will create the core bp at that time, then when you tear it down i will need to come back to the same location and see it no longer exist then i will make you a bp of it at the cost it takes to make the L core BP print. We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

A landing pad on L core. Built on top of core, with a bit of margin so you can still place biggest elements and / or build a bit, and expand underground. Easy to place with its big pillars Can be seen on VR: Aerogics L Core Landing Pad *** Honeycombs *** Aged Brown Pattern Wood 3: stairs banister Galvanized Gray Iron: landing area Glossy Yellow Plastic: lines on landing area Luminescent White Glass: inside lights Luminescent Yellow Glass: outside lights Matte Light Brick 1: main HC Matte Black Brick: secondary HC Waxed Brick 2: tertiary HC Polished Brown Wood 2: stairs steps Polished White Aluminium: metal struts

In the process of moving, blueprints are available to Kosmos Exchange. Space, it's got less lag! Sometimes, you just need a big space to set up storage or your own customizable factory layout. I got you. Big wide open modular with tons of space inside. Containers, sure. Factory, sure, dead noveans from your pvp conquests...sure. I'm using mine as a nice place to store my voxel libraries so they're not just out in the open cluttering all my pretty space views. Big L size space on top for landing too. Come see it in VR at "Czar in Space Showroom" Dispensers located here ::pos{0,0,-42090.7405,202368.7623,33445.6155}

This makes all size Advanced Optimized Containers EXXL - x2 every 7 days 9 hours XL - x2 every 3 day 16 hours L- x1 every 44 hours M- x1 every 22 hours S- x5 every 24 hours XS- x8 every 24 hours Our factories are as friendly user as we can make them. Everything is labeled for easy start up. All factories are setup to drop in raw ore and let it do the work!! Other than putting in schematics which everything is also labeled to let you know what units require what schematics!! We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

This will make 55 different elements to help you along your way of ship building. This factory has my most updated labeling screens, scripts and every industry is labeled by the Tier of parts or products it makes.! Adjustor XS- x2880 Adjustor S- x720 Adjustor M- x180 Adjustor L- x45 Aileron XS- x360 Aileron S- x90 Aileron M- x22.5 Atmospheric Airbrake S- x720 Atmospheric Airbrake M- x180 Atmospheric Airbrake L- x45 Atmospheric Fuel Tank XS- x720 Atmospheric Fuel Tank S- x180 Atmospheric Fuel Tank M- x45 Atmospheric Fuel Tank L- x11.25 Atmospheric Radar S- x60 Cockpit Controller- x45 Command Seat Controller- x180 Compact Aileron XS- x720 Compact Aileron S- x180 Compact Aileron M- x45 Databank- 2880x Emergency Controller- x320 Gyroscope- x720 Hovercraft Seat Controller- x180 Landing Gear XS- x960 Landing Gear S- x80 Landing Gear M- x20 Landing Gear L- x5 Programming Board- x720 Remote Controller XS- x320 Retro-Rocket Brake S- x720 Retro-Rocket Brake M- x180 Retro-Rocket Brake L- x45 Rocket Fuel Tank XS- x20 Rocket Fuel Tank S- x5 Rocket Fuel Tank M- x1.25 Rocket Fuel Tank L- x0.31 Space Fuel Tank XS- x720 Space Fuel Tank S- x180 Space Fuel Tank M- x45 Space Fuel Tank L- x11.25 Space Radar S- x60 Stabilizer XS- x720 Stabilizer S- x180 Stabilizer M- x45 Stabilizer L- x11.25 Vertical Wing- x1152 Warp Drive L- x1 Wing XS- x720 Wing S- x180 Wing M- x45 Wing Variant M- x45 Wingtip S- x1152 Wingtip M- x1152 Wingtip L- x288 VR: "VO Factory Sales" Discord Name: theOmega28.36#1869 Discord Channel: VO Industries I stand behind all my factories. If you have any issues please reach out to me and i will be more than happy to help resolve any questions or issues you may have. If i do any updates to any factory you already have, i will upodate it at no cost to you. I have a discord for VO Industries that you can join to help keep up with updates and future factories along with support tickets and other factory related topics!

Modern, spacious and affordable accommodation. The wooden style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony at the back of the 2nd floor provides a great opportunity for spectacular views, while on the ground floor, a dirt bed in front of the large windows provides a natural touch. Built on the middle of the construction grid allows for the owners to expand downwards to provide several basement levels. With plenty of ground space around the condo, several personal speeders can be parked nearby and/or develop more landscaping for natural views and enjoyments. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

Hadron Mining Platform 8 Designed around our signature Hadron theme, the Mining Platform 8 delivers style and function to any outpost or mining operation. Comes equipped with 4x L Basic Containers and each mining unit housing includes markers for quick and easy placement. Utilizing Jericho’s Mining script, you’ll have all the information you need to keep on top of your mining game. From timers to calibration percentages, miner up time and more at a glance. A single detection zone activates the mining script and lighting so no more running around in the dark with a pen and paper. The centralized VR station provides instant access to all mining units on the platform without the need to move from the spot. When deploying the platform, make sure the stairs and the voxel square at the bottom of the platform are above the surface of the terrain. This will ensure you have access to the containers if you choose to swap them out. The raised platform and circular arrangement of the mining units allow the bonus ore to spawn in a ring around the construct allowing for ease of access when collecting. Check it out in our showroom! ---- Available after release. ----

Sick of building in the dark? Our Work Shop is fully Illuminated for any time of the day building. Stop by on Alioth and take a look. Dispensers on site,