Dual Universe Creators

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

Stairs.... Drm free Now available in "Hagbards Marina" (Alioth Market 17) ::pos{0,2,38.4300,62.8686,1.6159}

Mining Outpost with independent fuel production. VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

Produces: Nitron, Basic Containers M & L Features supply line screens to tell you what each industry needs which item with each machine, screens can be removed later. Built to produce containers and atmospheric fuel from ground to finished product, the artisan workshop avoids the eye sore typical of most factories, whilst also allowing you to produce plenty of storage for all the things you had shipped from earth. I mean does anyone really care that a couple thousand potential colonist had were left to die for your legacy earth speeder collection to be loaded onto the Arkship. Let's be real people reproduce all the time, but that collection is the only one to be in such pristine condition. Best of all the price of this factory will keep undesirables like your neighbors from the next tile over from getting their grubby hands on one, and act like they ever could keep up with you.

Put your favorite cantina song on repeat as you plan your next builds and adventures. All are welcome, but your droids will have to wait outside! During beta I asked myself the question, what hadn't been made yet that people would love to see in the world of DU. After looking over nearly every frame of the cantina ever shown on film, every available blueprint online, former cantinas designed in all popular SW games, and even the entire PDF for Lego's step-by-step instructions - I felt prepared to bring the iconic location to life. All in all took about a month of casual playing to build/finalize. Static Model of the Cantina is on display at LSA Industries HQ, 13Km SE of Alioth Exchange (VR Location 'LSA Industries Alioth') *What is on display is what is on the blueprint, all furnishings, screens, lights, chairs, etc

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

Marina Walkway Set Walkways with handles: - straight - 22.5° - 45° Stairs 45° (Z-axis) Industrial Pillar with attachment for the Walkways drm free VR: "Alioth Marina"

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

A nice litle house for you to relax in, or have it as an office away from office. And when you just need to chill, why not cook a nice steak on the grill on the deck, looking out over the sea.

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

VR "VO Factory Sales" Materials cost on the market was about 6 mil. The cost of BP is $6 mil and that includes me deploying it. You can supply materials and i supply BP and deployment and you just pay me $6mil or i supply everything and you pay $12 mil. The price includes x3) Basic Containers L per section (x9 total). THIS Does Not Include Mining Units. Tri Hex Mining Structure allows you to mine from 3 hexes in 1 building. Equipped with a Surrogate Pod, VR and Motion for container hub. Has Landing pad design ontop with elevator access to main floor. Set up to x8 MUs on each section and room for more if needed. Has Hideaways for up to 10 L containers for each section. I do not have a setup to show anyone step by step. I have this set for token deployment only due to the hard to get ppl to understand the setup. I can place it way faster than the time to walk anyone thru the process.

This Station kit comes in multiple options. It cost 5m per BP. If your purchase in bulk the price will go down. Options Empty = Just the Shell. Standard = 2 x S core shelves, 6 XS core shelves, 20 L containers Standard With elevators for display = 2 x S core shelves, 6 XS core shelves, 20 L containers Standard with Ports = 2 x S core shelves, 6 XS core shelves, 20 L containers with Port access designed to work with the station kit you can have for free. Landing Pad = This is a flat landing pad designed to be placed at the end of the tunnels or on top. They are designed to be flexable and allow for uncovered parking for guest or extreamly large ships. " Landing Pad BPs are 1m each" Gate = This comes in 2 sides L and R with an XL gate in the center when connectect making a double XL gate opening. Aswell as Medium doors at the bottom for access to the landing pads outside. The gates are on Recievers to use with emitters. Just set the channel you want. Storage = No shelves 10XXL containers, 20 XL containers, Ability to copy and paste storage racks to add 50 additional XL containers and 20 aditional XXL containers Please contact me on discord for sales Seripis#0466 and Seripis in game. Dispensors will be up soon working on showroom. You can see the station at ::pos{0,0,361822.9769,97685.1034,174037.2009} Above Alioth or VR to Seripis Station

50% off blueprint price at the moment on dispenser This is a kit for the outpost landing pad as picture this kit is not for beginners its best suited for anyone that knows the fundamental of how to copy and paste and rotate etc in game, there is some over lapping you will also have to do as this pad design is very large but follow the link below and hopefully ive made it clear enough :) link for instructions to follow https://imgur.com/a/ZKcLP2q for VR please search loaded industries showroom

This makes all size Advanced Optimized Containers EXXL - x2 every 7 days 9 hours XL - x2 every 3 day 16 hours L- x1 every 44 hours M- x1 every 22 hours S- x5 every 24 hours XS- x8 every 24 hours Our factories are as friendly user as we can make them. Everything is labeled for easy start up. All factories are setup to drop in raw ore and let it do the work!! Other than putting in schematics which everything is also labeled to let you know what units require what schematics!! We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions