Dual Universe Creators

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

Tired of hanging your ship in between the mining units every few days you visit your gold mine? Why not land in style on this luxury M-core landing pad? The top is flat for easy landing but below the real magic happens. On a lower deck, connected with two smaller cores your mining units will be waiting for you. Easily accessible with two ramps from the flight deck or by teleporter from the ground below. Be in absolute control as you calibrate up to 15 mining units without moving a single step, and before you leave have three Large containers at your fingertips to gather you hard earned ores. If you feel like getting your hands dirty you can use the access hatch to drop down to the bonus ores awaiting pickup. A quick elevator up will take you directly to the the flight deck, onwards to the next stop. If you are really in a hurry, all containers and Mining Units are also in reach from one area on the flight deck. The long and stable legs will make placing these cores a breeze, even on hilly ground. Instructions: Place M-core with the middle edge of the mining platform in the exact middle of three tiles. Then place the Left hand S-core, finally the Right hand S-core. If you mix up the order, it will give a nasty one voxel gap. No returns. VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

Moved to Alioth, 7km north of Market 6. ::pos{0,2,39.2832,101.0451,299.8752} VR to "Pagoda".

A fancy mining rig on S core: 4 mining units, one container L and one VR node.

XDM tower is a 3 L core tall stack, 258m tall to the roof, and 333m to the very tip. Featured in the outpost museum. Contact: Actimist#4020 Primary designer: MadManWithABlueBox Contributors: Sinjin Factory worker: Visit NovaX showroom here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

Small Core Basic Containers Factory with a configure and start script Production per day with no talents. 240 Basic Container XS 60 Basic Container S 16 Basic Container M 8 Basic Container L 4 Basic Container XL 2 Basic Container XXL All machines have signs for your convenience All Screens have custom edited scripting

When not crashing into the ground at 5000km, perhaps you'd like a place to land nicely with a touchy of style on something that's super easy to put together? Sounds like CzarsLandyPad might work for you. I like the looks, my mom likes the looks, my dog thinks it's stylish, and my goldfish can put it together. Customizable from XS size all the way to custom multiple core sizes. As a perk, when assembled, a landing pad can also house all kinds of stuff inside....yes, inside! Tall enough for a large container which we all know can house many dead bodies from your pvp conquests or imagination. DRM free It's on an XS dynamic core so you can put it anywhere and even dock and transport. Come see them in action: Alioth Space VR coming soon

PYRAMID STORAGE ROOM: DONT WANT TO LINE UP 100 CONTAINERS? DONT WANT TO MESS WITH SCREEN LUA? THIS MIGHT BE THE THING FOR YOU! 100 L CONTAINERS PERFECTLY STACKED AND LINKED IN STACKS OF 10 TO HUBS WITH CONTAINER MONITOR LUA. ONLY 1MIL QUANTA ENJOY!

NovaX is proud to present this stunning, modern living space. Created and built by Zoltos. This 3 bedroom living space features a XL screen swimming pool decoration, miniature tennis court, fully fitted kitchen, 2 and a half large bathrooms and a separate outhouse for guests. Contact: Actimist#4020 Primary designer: Zoltos Contributors: Actimist Visit here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

The goal of the Alioth Hyperloop project is to connect various space elevators and towers to the markets via an underground tunnel and train system. Enabling efficient movement of large cargo to and from space and markets. Over 150km of tunnel has already been constructed demonstrating the movement of 1000tons 60km at 500kmhr for 100L of fuel. Now seeking partners, investors, - for - Public Relations and advertising, purchasing or leasing land, and construction of stations and tunnels. Also seeking landowners and tower or elevator operators who would like the convenience and profit of having the Alioth Hyperloop through their territory. VR demonstration track and self driving train - coming soon!

A wall made of 3006 animated lights on a dynamic core to welcome visitors :) You can see it here : ::pos{0,2,-23.9491,-10.5283,119.8070} (Yentico base in front of Alioth Market 13) To visit in VR, search "Light Wall" Peace - YesmanDu974

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

Put your favorite cantina song on repeat as you plan your next builds and adventures. All are welcome, but your droids will have to wait outside! During beta I asked myself the question, what hadn't been made yet that people would love to see in the world of DU. After looking over nearly every frame of the cantina ever shown on film, every available blueprint online, former cantinas designed in all popular SW games, and even the entire PDF for Lego's step-by-step instructions - I felt prepared to bring the iconic location to life. All in all took about a month of casual playing to build/finalize. Static Model of the Cantina is on display at LSA Industries HQ, 13Km SE of Alioth Exchange (VR Location 'LSA Industries Alioth') *What is on display is what is on the blueprint, all furnishings, screens, lights, chairs, etc

Let off steam after a long day in the factory on your own functional basketball court. Use the manoeuvre tool to throw the balls across the court into the hoop. Lasers in the hoop detect the balls and trigger one of four lights on the backboard. Come and try it yourself by visiting via VR by searching "NovaX Estates" https://www.youtube.com/watch?v=iiSU7WV6cWQ&t=2s If you could like to have the basketball court snapped to an existing structure or grid, it can be installed for you for a 5 mil quanta fee. Contact: Actimist#4020 Primary designer: Actimist Contributors: Factory worker: