Dual Universe Creators

I have quited the game, for any info contact orri. or RyanPryde in discord --DU creators website is very bad i got hacked do not trust it-- All likes removed from my ships Since the release of the Calico, I imagined making a partner craft small enough to fit inside the storage hold. Introducing the Knox, a fast and aggressively stylish pocket bike. This sharp looking hover bike was inspired by the Aopoa Nox of Star Citizen and adapted for the mechanics of Dual Universe. The Knox was made as a pocketable atmospheric bike that could reach insane speeds and give the rider the thrill of piloting a highly agile craft. The Knox comes with 2 chair surfaces and a remote controller allowing you to pilot the craft with a passenger. Perfect for flying you around your mining hexes, to your neighbors base or race around with your friends. Equipped with 3 customizable S engines, you can tailor the bike to your preferences giving you full control of the speed, weight, fuel economy and brake force. This way handling can be tuned utilizing various engine configurations. Behind each engine exists a flat voxel to easily swap to your desired combination. Included in the design is a blank programming board giving you options to install a LUA script of your choice. The remote controller comes pre-installed with Arch HUD giving you the option of autopilot and a whole host of helpful features. Visit the Kosmos Exchange showroom or FinalX main Base to view our selection color combinations. The luminescent accent lines and metallic body panels can be coloured to your preference when buying tokens and are available in a range of colors. New 1.4.16_x version updates to lua to work with current version V2 has a speedometer Arch hud updated You can type in lua chat the command while you flying /G AtmoSpeedLimit 2000 Warning: excessive speed may result in injury, death or tons of fun!

The completion of the Moltres heat shield project has allowed new designs that would previously have destroyed themselves seconds after opening up the throttle. The result is a dragster muscle ship that (with lv4 piloting talents) can hit 3000km/h at sea level using only basic engines, has 19Gs of high altitude lift with full fuel, can withstand the fires of a 5000km/h reentry, and can comfortably haul 500t anywhere in the system while maintaining a low starter-friendly build cost. It is certified for hypersonic flight up to 10,000km/h in upper atmosphere! Moltres™ heat shield equipped. Contact the seller after your purchase for free hypersonic flight tips, and activation instructions on the Moltres shield!

Are you sick of ever so poorly lit flying boxes ? Have you had enough of ugly walls of engines ? Do you wanna up your game and fly in style, both in space and in atmosphere ? All while bathing in luxury with a magnificent view ? And with 2kT of cargo in the trunk ? Then I bid you welcome aboard the Ray. Several hundred hours went into it, with a lot of love for every detail. Custom screens, animations, voxelworks, I truly went all in for a durable, lovely vehicle. All stats are given with 0 talents, so they can only get better. Token purchases will be bumped to a minimum of level 4 talents on atmospheric and space flights and cargo. Development Background: It was a cold November night at the annual Invictus exhibition when serendipity made the paths of the CEO of Serenity Shipyards cross with those of the main heads of Origin Jumpworks and Crusader Industries. Their company policies had calcified over time and drifted toward the same mistakes as the 21st century had witnessed; What once were pioneers of space ship development were now nothing more than shareholder pleasers. Thus, Serenity Shipyards entered a new phase with some of the most competent engineers. The team was granted the full freedom of creation under the auspices of Japanese style company policy with quality and engineering excellence as the top values. Charged with the development of a graceful civilian multipurpose vehicle, Serenity Shipyards thus produced its first vehicle, the Ray. Where to find: The Ray is currently not in a showroom, as works on a secondary edition have started. Please contact me via discord for a BP. Serenity shipyards will provide all owners of previous versions of the Ray with the newest BP at no cost. Manual upgrades of already spawned vehicles are offered at minimal costs, depending on the version to version differences. VR: The Ray Executive Serenity Shipyards also offers customization and individualized Editions, please contact CEO mark-o-solo (Discord: god#0275) for development. The Ray can soon be found at several showrooms. Yours truly -mark-o-solo, CEO Serenity Shipyards

Build by Akcroma#9718 The one and only Borg cube nano allowing you to compete against the current meta ship in style. 0 stacked elements. Full fuel/ammo/warpcells/core/scrap/pilot skills: Max thrust: 13.2g Brake force: 13.4g 10 Advanced Laser L 10 Ammo containers 2 Advanced Quick Wired Radar L 4 Uncommon Military Space engine XL 2 Uncommon Maneuver Space engine XL 5 Space Fueltank Shield L Warpdrive 1 Container L Script homemade pilot/gunner Full buff 5/5 (elements/weapons/HP) 458m² frontal cross section (without DSAT) 572m² vertical cross section 529m² lateral cross section 5298m3 Plastic Updated with plastic voxel for reach 8.3M CCS.

Build by Knight-Sevy#6239 The TIE Advanced x1, or TIE/ad, was an advanced starfighter that was part of the TIE line manufactured the shipbuilding industrie of Sentinels. Contact : Knight-Sevy#6239 It is built in such a way as to be as close as possible to the real scale while adding the "DU" dough and as details as possible. Real cockpit and accessible through a hatch at the top. Sold with 800 l of fuel and 400 T3 ammo XS. The TIE Advanced X1 is ideal for training space combat in Dual Universe with friends and it got the same stats than our X-Wing so you have the choice ! You need "Control Unit Capacity Handling" at lvl 2 to use the 2 laser (Weapons => Seat Capacity Handling => Control Unit Capacity Handling) And then apply them on your construct (Right clic => Construct => Reapply talents on construct) BP dispenser located on Moon 4 at - ::pos{0,22,-24.0681,158.4720,64.3307} To view in person, visit VR: " SNS Showroom Public DSAT" https://youtu.be/laLS_bgT_Hw No talent max stats : 6.25g MAX THRUST 10g BRAKE FORCE 34m² Frontal cross section 49 838 km/h MAX SPEED

The Oswen class is an XS PvP Ship cannon build, a great little fun ship to muck around with your friends dogfighting or just to mess about. Cheap to produce market cost of parts is around the 1 million mark depending up supply and demand of course. Dispensers coming soon to Crash Industries Showroom

A free XS hybrid ship to get you out of trouble if you need it. Yep it's free, no there isn't any DRM. Dispensers with BP and all required parts now available on Starlantis. ::pos{0,0,-999977.8712,593168.6796,-1418865.8473} Also comes with fuel and some scrap.

A combat defense hauler for those times you find yourself in need of a pew. Armed with 3 Advanced Agile Railgun you can reach out an touch someone trying to scoop your goods! A reliable build for a good starting craft. Visit ADMI Build Sore in VR and head to the cyan pads!

I have quited the game, for any info contact orri. or RyanPryde in discord The arcadia albator warforged multicore ship (Blue print release Estimated) Video : https://www.youtube.com/watch?v=I2VsljnVxbw&t=82s In the 2013 CGI film adaptation, Arcadia is given its most drastic redesign yet. While superficially from a distance it still closely resembles the classic shape of the older designs, the retro World War II battleship-inspired characteristics of Leiji Matsumoto have been abandoned almost altogether for something quite dominating and alien. It is far larger at double the size and mass, and much more ridiculously defined and grossly detailed, to the point that the skull-and-crossbones feature a lower jaw, hollow eye sockets, and a spinal vertebrae-like structure extending from it across the middle of the forecastle. Ominous red lighting emits from the underside layers and various holes and vents of the ship, including the eye sockets. Instead of three turrets, there are three rings encircling the hull of the vessel mounted with four cannon turrets each, capable of moving along the circumference to cover up any blind spots. There are three "masts", the last of which a Jolly Roger flag is usually flown from. In the place of wings, there are four bony harpoon-like protrusions that point forwards, with the top two being longer and skinnier than the bottom two. More protrusions jut out towards the stern of the ship, with two culminating in hook shapes, and one resembling a short bony tail. The middle of the ship is seemingly built around a large spherical mass. The vessel has an overall rocky or bony texture across the whole body, with some parts looking as if they were warped or fused onto the ship. Perhaps most interestingly of all, this depiction manages to still retain a semblance of the original bridge and superstructure, even the shape of the wood-like galleon stern remains intact. It is now powered with dark matter engines that are hexagonal in shape. The ship is in work in progress

Dot Metis is first series of Dot Interplanetary of ships that is being introduce after the release. Dot Metis is a pocketable ship with an over engineered wing left. Come and pick up your ship today. Free BP. Update: All ships come with T5 buffs, just message me in discord to find a time.

Medium ship It carries 2 L Containers and is equipped with 8 L Spatial Engines including 4 Atypical Military 7 Atmospheric Engines including 5 military Advanced, there is free space for interior fittings such as interior decoration free for everyone to do what they want Vaisseau de Taille M Il embarque 2 Conteneur L il et équipé de 8 Moteurs Spatial L dont 4 Militaire Atypique 7 Moteurs Atmosphérique dont 5 militaire Avancé, il y a de la place libre d'aménagement a l'interieure comme la décoration iintérieure libre a chacun de faire ce qu'il souhaite Pour venir le voir ::pos{0,2,33.9334,111.1889,-0.0000}