Dual Universe Creators

This is a small core starter warp cell factory designed mainly for personal use production of warp cells. All industry is labeled via screens for easy startup. Pre installed with Indy Hud by Codeinfused. Current setup will make 2 warp cells every 50mins with no talents. This can be increased easily by adding more glass furnaces for the warp cells and increasing the output of a few of the electronics machines. Industry placement talents will also increase speed of output. All industry units are labeled. You can view it by VR at Phoenix Corporation Location ::pos{0,2,47.8459,114.4380,62.5178}

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

- A large core outpost building, with landing pad for medium core sized ships. - A platform to set up your mining operation on 3 adjacent territories, for convenient access to mining units and storage from a single location. - Storage: 6 Basic Containes L (2 per territory totalling 384 kl when fully buffed, more can be added) - Placement space for 12 mining units (4 per territory) 3 blueprints are provided - one for the main large core building, and two additional small core constructs that integrate to the main building. It is important and strongly advised that you refer to the Deploy Setup Manual, as precise deployment of the 3 BPs is essential to enable miners working properly on the 3 territories. Get the manual here: https://drive.google.com/file/d/1VQ1bRl1KgdTca1cO-hZctLboFwJC_NwA/view?usp=sharing Material list: https://docs.google.com/spreadsheets/d/1fYWNOhXSlhMM0Ky4PHIrxpxwJlIues0a5YV4HOhcObg/edit?usp=sharing VR: DSPI Outpost Sales dispenser: ::pos{0,2,41.7116,89.5775,34.7921}

Tired of pads being too small for your need? Zealot Company has your needs covered with this quadcore landing pad! It has a complete interior for your storage needs and elevators for mobility around the structure. Stop by for an in-game look at ::pos{0,2,-23.5467,16.8591,36.0142}, you can purchase the bp at ADMI Build Store at the Zealot Company dispensers. Note: Due to the snap tool not overlapping element with voxels each pad has its own set of elevators, some will need to be deleted, if you want and then centered.

PYRAMID STORAGE ROOM: DONT WANT TO LINE UP 100 CONTAINERS? DONT WANT TO MESS WITH SCREEN LUA? THIS MIGHT BE THE THING FOR YOU! 100 L CONTAINERS PERFECTLY STACKED AND LINKED IN STACKS OF 10 TO HUBS WITH CONTAINER MONITOR LUA. ONLY 1MIL QUANTA ENJOY!

M core Outpost with T1 pure material production, fuel and honeycomb Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store XS Core size Elevator dock on top

Available in two different styles! Need 7680kl of storage in a box a lil larger than a XS core? This is the box for you! 10 XXL containers in the space that would normally be only 4 containers. Perfect for docking to ships, or base set ups. Perfect for any place, where you need to save space. Purchase 1 BP for 5m, or 3 BPs for 10m. --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Ikara Industries presents the "Ikara Factory M1" - Elemetns and Script Rework. Produce and rest, then the Ikara Factory M1 is for you. The M core includes - 5 floors for space up to XL machines - 1 basement with the possibility to integrate up to 84 L containers - 1 factory control center with 4 L screen - Door script (RestrictedAccessDoor) provided by Davemane42 - Light Control (ScreenLightControl) script provided by DU_ASTco - Screen Script to set Text to the Lounge and Entry Screen - Large window front - 2 lounges with benches and snack machines. When the production takes longer. - 15 L screens with the Entropy Effect to chill on the top. What else you should know: - Building has DRM - All screens must be turned on once manually. VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

This makes all size Advanced Optimized Containers EXXL - x2 every 7 days 9 hours XL - x2 every 3 day 16 hours L- x1 every 44 hours M- x1 every 22 hours S- x5 every 24 hours XS- x8 every 24 hours Our factories are as friendly user as we can make them. Everything is labeled for easy start up. All factories are setup to drop in raw ore and let it do the work!! Other than putting in schematics which everything is also labeled to let you know what units require what schematics!! We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

ETA Mining Platform Easy Cheep and better then nothing. BP requires 4L containers 1 Hubs 8 Square light s 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 This is a double landing pad with 2 xs core size garages with plenty to space to add a factory or office space with viewing balcony, perfect for any outpost you can view at the location written on the right of the screen or view in VR search for loaded industries

VR: "VO Factory Sales" 24 Hour production with no talents Advanced Atmospheric Engine XS - x80 Advanced Atmospheric Engine S - x20 Advanced Atmospheric Engine M - x5 Advanced Atmospheric Engine L - x2.5 Advanced Space Engine XS - x80 Advanced Space Engine S - x20 Advanced Space Engine M - x5 Advanced Space Engine L - x2.5 Advanced Space Engine XL - x0.6 Advanced Hover Engine S - x21.2 Advanced Hover Engine M - x5.3 Advanced Hover Engine L - x2.6 Advanced Flat Hover Engine L - x2.6 Advanced Vertical Booster XS - x80 Advanced Vertical Booster S - x21.2 Advanced Vertical Booster M - x5.3 Advanced Vertical Booster L - x2.6

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The X8 marks the largest X series made by Locura. Like all other X Series units, the X8 brings all the features you could expect from a Locura X Series rig. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ