Dual Universe Creators

Production Per 24 hours with no industry talents Basic Assembly Line XS- x720 Basic Assembly Line S- x180 Basic Assembly Line M- x45 Basic Assembly Line L- x11.25 Basic Assembly Line XL- x6 Basic 3D Printer M- x45 Basic Chemical Industry M- x45 Basic Electronics Industry M- x45 Basic Glass Furnace M- x45 Basic Honeycomb Refinery M- x45 Basic Metalwork Industry M- x45 Basic Recycler M- x45 Basic Refiner M- x45 Basic Smelter M- x45 Transfer Unit- x11.25 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

Better then Dirt No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

Put your favorite cantina song on repeat as you plan your next builds and adventures. All are welcome, but your droids will have to wait outside! During beta I asked myself the question, what hadn't been made yet that people would love to see in the world of DU. After looking over nearly every frame of the cantina ever shown on film, every available blueprint online, former cantinas designed in all popular SW games, and even the entire PDF for Lego's step-by-step instructions - I felt prepared to bring the iconic location to life. All in all took about a month of casual playing to build/finalize. Static Model of the Cantina is on display at LSA Industries HQ, 13Km SE of Alioth Exchange (VR Location 'LSA Industries Alioth') *What is on display is what is on the blueprint, all furnishings, screens, lights, chairs, etc

From the mind of our long-term Shadow Union member, Legate, and all-around good guy hailing from the South of London may I present Alethion's "CITADEL OF DOOM". Put a factory in it, put a showroom in it, try to summon Skeletor for the ashes in there, come on down, and pick yours up today. not guaranteed to summon Skeletor, or any other, devil, demon, wraith, specter, phantasm, ghoul, spector, spooks, or ghosts. From this dimension or any others. Good day. ::pos{0,2,45.8846,92.0773,15.9071} Vr/ is Shadow Union Alioth Showroom 26km north of Market 6

Designed by AtmoCorp, a subsidiary of Infinity Corporation. The AtmoCorp T2 Outpost is the next step up from your Starter outpost. Designed to be deployed on any terrain, the T2 Outpost comes with a personal landing pad, two floors of living space, and an outdoor terrace and jacuzzi. With a Container Hub and up to ten large containers pre-installed, with T5 talents included it has a storage capacity of 1920kl. *NEW updated version includes four Basic Mining Units and a rack to hold them. If you don't plan on mining, it can be deleted. The Outpost is built on the top half of a Medium Core. It can be placed with the lower door at ground level, with half the core below the ground to allow for an underground factory. Or the core can be raised up as high as you want, and the lower door and support structure can be copy and pasted to extend it to the ground. Blueprint for sale for 5M 7km south of Market 7 ::pos{0,2,19.3915,97.2582,147.7494} Or in VR search for "AtmoCorp Alioth" DM [IC]Atmosph3rik#6658 on DISCORD with any questions.

50% off blueprint price at the moment on dispenser This is a complete kit of my landing pad without basement, you can make any size landing pad you like even connect 4 cores together for extra large one or even larger, ive tried to make the instructions as simple as i can but hopefully if your interested in this kit you already know how to copy and paste and rotate etc please check out the pictures for more info and if you need any questions answered dm me on discord loaded#2378, location on your right in the info and the dispensor is in front on the landing pad, i also added a base part with no wiring details also u will want plenty of medium glass panel to go over the wiring detail, can also change the colour to your what ever you like. PS no need to press shift when adding the leg stands

Large core easy to place landing pads very detailed and also very easy to change the colors! The style is setup for the steel and the lum glass to be swapped to different colors to create a color pattern for any area DRM is locked as this is how i fund my habits! VR ADMI Deluxe Temporary to look at and locate on alioth will have a proper store here in a bit after i make more money lol. Located 50ish km from market 13 at cords ::pos{0,2,-24.6313,16.7490,95.7777}. Thanks for looking! I have made roads that are very easy to place and dont get in the way of taking off! will have more styles later.

PYRAMID T1-3 REFINER+FUEL FACTORY This factory does just what it says. Also makes nitron and X1-4 fuel from byproducts and 2 adjustable transfer units to control how much is made. 8 basic refiners to keep up with most schematic demands. Easy use: Ore in, Waste Out, Product Out format All container hubbed for easy expansion! READ OUR BIO FOR MORE INFO

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

derrick d'exploitation minère fabriqué par Efchaos 4 mineur + 1 container M il reste de la place autour pour ajouter des mineur ou meme un conteneur XXL expanded avec aussi un container a colis XXL VR: Spaceboys beach club n'achetez pas en VR

** UPDATED PRICE AND VR LOCATION ** Tired of boring mining platforms? This industrial mining outpost raises your mining operations to the next level! Outpost has been designed to house max 5 mining units. It has 1 large container for ores, 1 small container for fuel and 1 refiner to refine ores to M size container if needed. There are 3 different landing platforms for your haulers or personal aircrafts for easy access. You can access fuel, ore and refined ore directly from landing platforms. Naturally you can use elevator access from the ground if you arrive with very large vessel. I will also sell VTOL ships which I use with these platforms. Let me know if you are interested of these also. Volume discount is possible. Please pay attention on details, there are plenty. You can now check out this building via vr: "Odz Mining Outpost MO31" Sale for pb and other Odz stuff can be found from: Location: ::pos{0,2,-0.8187,178.5356,52.3225} Surrogate: Odz ShowRoom (dont buy stuff if surrogate, you have to come visit) Message Odzord#2815 for questions.

50% off blueprint price at the moment on dispenser This showroom kit will allow you to build any size showroom you wish to house as many ships as you like, its very easy to do just like the hangar kit, its panels are also same size as the hangar kit so you can even easily decorate the outside walls of your hangar with this kit or even be creative and mix and match, everything you see in the pictures of these buildings are in this kit the only thing you have to do is fill the empty space on roof and make your own link from the balcony curve which is all very easy, also comes with a detailed floor panel 50 x 50 voxles in size for very easy placement which you can use in any of your other buildings you may own. you can with a bit of time change the mats of all the panels to suit your colour of choice endless possibility, you will also find what i call end caps to finish off parts that are left open from your build can view in VR search loaded industries showroom any questions please dm me on discord loaded#2378

Here it is! The Kombat Extendable Mining Rig, Landing and Launch Pad system. Build with the custom, patented landing deck. This one does not use fussy zero-G technology but relies instead on trusty steel and concrete to keep everything upright. On deployment you can chose your own building material honeycombs (Primary, Contrast, Metal and Lumi). Comes in four flavours with each it's own distinct role: Barrier - (Bp: 0.9M Token: 2.7M) The basic variant is used as a simple but elegant landing platform that allows any M-core or smaller ship to land safely on it. Guided by landing lights and having a nice elevator down to the ground. Corsar* - (Bp: 1.8M Token: 3.6M) This one comes with a hole in the top! But in that hole fits a Medusa Y-Lift capable of lifting around 600tons on Alioth and up to 2Kt on places like Madis without talents. It comes with a nice ramp that allows you to walk up right to the Elevator seat. Kombat - (Bp: 1.8M Token: 3.9M) Ah, the trusty workhorse of the lot. Why not have you landing pad AND do three tile mining all from the same spot? Comes with 3x basic and 1x uncommon mining units but can be extended or swapped out to any configuration. Comes with all the luxuries of both the Barrier and the Corsar but also spots an Large Container to hold all your ore. Can be deployed to service 1, 2 or 3 adjacent tiles from one location. Stugna* (Bp: 2.4M Token: 4.9M) The big boss. Why not combine EVERYTHING? Have a decent landing pad, a launch pad for your elevator AND have access to three mining rigs all at the same time? Place one of these in the middle of a super-flower, add a few containers and do your weekly mining run with your pocket-speeder, dumping all ores straight into the elevator storage, ready for lift-off. Why spend any more time on dusty rocks while you could be sipping a Pan-Galactic Gargle-Blaster back at home and let the Kombat Rig do it's work? * Comes without the Medusae S-Core Elevator that fits the exact dimension. Can be bought separately (Bp: 17M Token: 24.5M). In order to dock in space we highly recommend the Bogdan Space Dock L-core landing (Bp: 3.8M Token: 15.8M). This doubles as an L-core space landing pad and space station. As nice as pictures are, a visit is worth more than 1000 of them. VR over to SVEA Elevator Showroom and cross it to the North, can't miss it. The Bogdan can be viewed at VR: NSS MADIS VR (this one is being developed right now) Please discuss order and installation. I want to do a first installment myself and discuss all the details, then hand over extra blueprints when needed.

Dry Dock LC-01 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!