Dual Universe Creators

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

ON SALE!!! Presenting the space biome. VR vanherck space biome (ive dropped it with black alu and red lumi) BP for only 3 million quanta (token about 15 mil depending on market prices) Dispenser at ::pos{0,2,34.7446,86.1685,223.8382} Stock is low cause bp costs. But you can always give me a shout A Single L core spacestation that is perfect for space station newbies or veterans. The open interior was made so the buyer can fill in the space with whatever he or she pleases. There is enough room since the structure spans the entire L core. It is also symetrical on all 4 sides (not top and bottom) for easy deployment. The Building is mostly made out of carbon honeycomb(matte and glossy) and only some decorational elements like lights and windows. If you want it or have anny questions dont hesitate to contact me Vanherck(ingame) and vanherck#7572(discord)

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

Features: The Ta'veren Mega Factory is a fully modular, easily-expandable, space or static factory BP for those of you who want to link up a machine to print an end part. This factory is set to produce all components for tiers one to four. All parts with multiple outputs are designed to cycle contents. If you need more links, simply add a new box and transfer unit, remove the link from the topmost box to the bottom transfer unit, pointing to your new transfer unit, whose output goes to your new box, and link the new box to the bottom transfer unit. If you find it isn't producing as many parts as you need, simply add a new machine on top of it and have the output go to the next box. All industries are named with what they produce, as are the output boxes, so you can easily identify where things link. Color coded borders surround industries with what Tier. Also comes with DU-Locura-Storage-Info for ores and IndyHUD for your industry monitoring.

Here it is! The Kombat Extendable Mining Rig, Landing and Launch Pad system. Build with the custom, patented landing deck. This one does not use fussy zero-G technology but relies instead on trusty steel and concrete to keep everything upright. On deployment you can chose your own building material honeycombs (Primary, Contrast, Metal and Lumi). Comes in four flavours with each it's own distinct role: Barrier - (Bp: 0.9M Token: 2.7M) The basic variant is used as a simple but elegant landing platform that allows any M-core or smaller ship to land safely on it. Guided by landing lights and having a nice elevator down to the ground. Corsar* - (Bp: 1.8M Token: 3.6M) This one comes with a hole in the top! But in that hole fits a Medusa Y-Lift capable of lifting around 600tons on Alioth and up to 2Kt on places like Madis without talents. It comes with a nice ramp that allows you to walk up right to the Elevator seat. Kombat - (Bp: 1.8M Token: 3.9M) Ah, the trusty workhorse of the lot. Why not have you landing pad AND do three tile mining all from the same spot? Comes with 3x basic and 1x uncommon mining units but can be extended or swapped out to any configuration. Comes with all the luxuries of both the Barrier and the Corsar but also spots an Large Container to hold all your ore. Can be deployed to service 1, 2 or 3 adjacent tiles from one location. Stugna* (Bp: 2.4M Token: 4.9M) The big boss. Why not combine EVERYTHING? Have a decent landing pad, a launch pad for your elevator AND have access to three mining rigs all at the same time? Place one of these in the middle of a super-flower, add a few containers and do your weekly mining run with your pocket-speeder, dumping all ores straight into the elevator storage, ready for lift-off. Why spend any more time on dusty rocks while you could be sipping a Pan-Galactic Gargle-Blaster back at home and let the Kombat Rig do it's work? * Comes without the Medusae S-Core Elevator that fits the exact dimension. Can be bought separately (Bp: 17M Token: 24.5M). In order to dock in space we highly recommend the Bogdan Space Dock L-core landing (Bp: 3.8M Token: 15.8M). This doubles as an L-core space landing pad and space station. As nice as pictures are, a visit is worth more than 1000 of them. VR over to SVEA Elevator Showroom and cross it to the North, can't miss it. The Bogdan can be viewed at VR: NSS MADIS VR (this one is being developed right now) Please discuss order and installation. I want to do a first installment myself and discuss all the details, then hand over extra blueprints when needed.

50% off blueprint price at the moment on dispenser This showroom kit will allow you to build any size showroom you wish to house as many ships as you like, its very easy to do just like the hangar kit, its panels are also same size as the hangar kit so you can even easily decorate the outside walls of your hangar with this kit or even be creative and mix and match, everything you see in the pictures of these buildings are in this kit the only thing you have to do is fill the empty space on roof and make your own link from the balcony curve which is all very easy, also comes with a detailed floor panel 50 x 50 voxles in size for very easy placement which you can use in any of your other buildings you may own. you can with a bit of time change the mats of all the panels to suit your colour of choice endless possibility, you will also find what i call end caps to finish off parts that are left open from your build can view in VR search loaded industries showroom any questions please dm me on discord loaded#2378

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.

NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 50% off blueprint price at the moment on dispenser loaded industries presents This stylish futuristic showroom with viewing balcony, display your ships in style with this very bright display space, this is my 20th design in dual universe, you can view in VR search (loaded industries showroom) and head straight up the road and your find the showroom, pictures dont do it justice really best to see in person, you can remove the writing and add your own name to the building any questions please message me on discord loaded#2378

Moved to Alioth, 7km north of Market 6. ::pos{0,2,39.2832,101.0451,299.8752} VR to "Pagoda".

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 my latest static building is a large factory you can visit in vr seacrh for loaded industries showroom and exit that building and your find this factory across runway, this large core factory pretty much takes up the full height of a large static core and comes with 5 floors, you can copy and paste more racks and place as you need them or you can even delete all racks and turn in to a showroom or anything you like, there are 2 different blueprints one with and one without a expanded small gate so you can build without spending millions on a door that you can add later if you wished, any questions please message me on discord, location to your right for dispensers and please dont buy in VR

Luxury pads that where originally built in beta and now redone with better skills. Large core uses mostly plastics and some wood there is a little bit of gold but not enough to break a bank! P.S. there is a little copper in the bp i havnt located yet swap this out for the gold is like 0.69m3 of it. Will be working on roads for this pad in the future thanks for looking!!! Located at ::pos{0,2,-24.6984,16.9672,135.7213} on alioth. Can vr temporary location of surrogate at ADMI store temp.

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

One L core and 8 landing (M core) pads that align with the L core. I can help install everything For more info DM Jasper_1 on discord Discound if u buy more 2 for 25 mill 3 for 35 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

VR: "VO Factory Sales" 24 Hour production with no talents Advanced Atmospheric Engine XS - x80 Advanced Atmospheric Engine S - x20 Advanced Atmospheric Engine M - x5 Advanced Atmospheric Engine L - x2.5 Advanced Space Engine XS - x80 Advanced Space Engine S - x20 Advanced Space Engine M - x5 Advanced Space Engine L - x2.5 Advanced Space Engine XL - x0.6 Advanced Hover Engine S - x21.2 Advanced Hover Engine M - x5.3 Advanced Hover Engine L - x2.6 Advanced Flat Hover Engine L - x2.6 Advanced Vertical Booster XS - x80 Advanced Vertical Booster S - x21.2 Advanced Vertical Booster M - x5.3 Advanced Vertical Booster L - x2.6