Dual Universe Creators

At daytime a fairly normal looking tower, but at night it seems to be burning. 5,000,000 quanta for a batch of 8 blueprint copies. Dispenser is in the penthouse underneath the landing pad in the top of the tower. Deploying strategy: 1. deploy the base core 2. deploy the North core, then the East, then the South and then the West core 3. deploy the first floor on the base core 4. deploy the second floor on the first floor 5. the second floor bp copy is DRM free so you can mulitply it to make your Lotus tower higher 6. deploy the top floor on the final second floor core NOTE! Possible problems: while connecting the North, East, South and West cores to the base core you may have to remove glass panels from the base (4 in the center) and then place them back when the core is placed. Check out the tower in VR: The Burning Lotus or visit at location: ::pos{0,2,40.7757,116.8397,0.0000} Have fun!

Greetings Noveans. Introducing my first upload..... my S Core fuel station. It's DRM free so you can move it onto a larger core if you wish to scale up the container storage or place it at the end of your L core runway. 3 Fuel pumps with dispensers which can be configured to your own requirements, and space to expand to 5 pumps if necessary. Shop area with cash machine , refreshment vending machines, shelving for spare ship parts (Supplied empty due to upcoming beta wipe), 4 dispenser slots to sell scrap and warp cells, and a cashiers office. The rear of the office has a small empty stock room with an elevator to the fuel refinery upstairs (Again.,there is space to house the industry units to support 5 fuel pumps.) Special thanks to my Kosmos Org Mates for your help & encouragement: Scourgy (for the pump design), Captain Harlock (for voxelmancy lessons), Lunarzkii & fridaywitch Please note: The inside may be very bright if you play with "shadows off" on your graphics settings... if this is the case, you may wish to remove some of the internal light fixtures. Please contact me on my discord to rectify any problems, or if the dispenser needs refilling. I appreciate your feedback (17th Nov 22) - dispenser is placed at Kosmos Showroom. (Alioth) ::pos{0,2,2.9117,105.4578,53.1729}

--- 24 Hour Production with no boosting talents--- Basic mining Unit L - 24.5 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

PYRAMID SCREEN FACTORY: Tired of paying 8k for an XS screen? We were too. So here it is, a screen manufacturing beast. This factory can make a literal ton of screens a day. with 10 assembly lines, this factory is capable of making xs,s,m screens and xs,s,m,l transparent screens. all 10 assembly lines can produce screens of your choosing since they all use the same parts. Just put whatever sized screen schematic you want in any of the assembly lines. they can run one of each type or all of the same type. makes well over 1000 screens per day! XL screen factory coming soon! READ OUR BIO FOR MORE INFO

This will Produce with no indy boosting talents every 24 hours: Uncommon Assembly Line XS 240 Uncommon Assembly Line S 60 Uncommon Assembly Line M 15 Uncommon Assembly Line L 3.75 Uncommon Assembly Line XL 2 Uncommon 3D Printer M 15 Uncommon Chemical Industry M 15 Uncommon Electronics Industry M 15 Uncommon Glass Furnace M 15 Uncommon Honeycomb Refinery M 15 Uncommon Metalwork Industry M 15 Uncommon Recycler M 15 Uncommon Refiner M 15 Uncommon Smelter M 15 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

A landing pad on L core. Built on top of core, with a bit of margin so you can still place biggest elements and / or build a bit, and expand underground. Easy to place with its big pillars Can be seen on VR: Aerogics L Core Landing Pad *** Honeycombs *** Aged Brown Pattern Wood 3: stairs banister Galvanized Gray Iron: landing area Glossy Yellow Plastic: lines on landing area Luminescent White Glass: inside lights Luminescent Yellow Glass: outside lights Matte Light Brick 1: main HC Matte Black Brick: secondary HC Waxed Brick 2: tertiary HC Polished Brown Wood 2: stairs steps Polished White Aluminium: metal struts

drm free VR: "Alioth Marina"

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

Sick of building in the dark? Our Work Shop is fully Illuminated for any time of the day building. Stop by on Alioth and take a look. Dispensers on site,