Dual Universe Creators

PYRAMID AMMO FACTORY RGEAMS This factory makes a ton of ammo! makes 4 types of rail gun ammo: M and S and L* electromagnetic and antimatter produces approximately 2500 S and 1500 M per day depending on your talents. we also make custom ammo factories. 5 mil down 5 mil on completion Since launch *THIS FACTORY MAKES ALL THE NECESSARY PARTS FOR L AMMO TOO. JUST PLOP AN L ASSEMBLY LINE DOWN AND LINK FROM THE APPROPRIATE CONTAINERS. I CAN HELP WITH THIS UPGRADE IF YOU CONTACT ME. READ OUR BIO FOR MORE INFO

Tiny Warp Cell Fuel Factory (TWCFF) Need warp cells? Or maybe just some fuel? Setup this easy to use warp cell, atmo fuel, and space fuel factory. With base skills it will produce ~74 warp cells a day and at 3's it will produce ~90 warp cells per day. Perfect to keep your warp shuttles fueled! To change how much gets produced merely click the up and down arrows on the screen. Fuels go up/down in increments of 1000, and warp cells in increments of 25. You will find everything you need in one container hub. Feed the ores and schematics there (make sure to mark it as the schematics container) and the output of fuel and warp cells will be found there too. I like to keep it organized (see picture) to make it look very nice as well. Unlike the Tiny Factory, the TWCFF does not require a constant presence! This factory works just like any other industry. When you deploy this factory and start the board up front that controls the screen, it will auto configure all of the industries for you so you won't need to go in and figure out what maintains you need to set each industry at. Very convenient! Only thing you will need to do is add 3L of Catalyst 3, included with the blueprint, to a container hub under the info button in the "server room". The server room contains the programming boards that will setup your industries for the first time. You will rarely need to go in there. Dispenser Location, Haven: ::pos{0,27,-14.3128,30.9315,9.6166}

XDM tower is a 3 L core tall stack, 258m tall to the roof, and 333m to the very tip. Featured in the outpost museum. Contact: Actimist#4020 Primary designer: MadManWithABlueBox Contributors: Sinjin Factory worker: Visit NovaX showroom here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

PYRAMID WARP CELL FACTORY: BETTER THAN THE REST CHEAPER THAN THE REST MAKES APPROX. 244 WARP CELLS PER DAY! 288 WITH LVL 4 TALENTS! LVL 4 PUT DOWN SERVICE 5MIL DOES NOT COME WITH SCHEMATICS. LIST OF SCHEMATICS NECESSARY CAN BE FOUND ON OUR DISCORD. UNLIKE THE OTHER MODELS FOR SALE ON DU THIS FACTORY COMES WITH EVERYTHING LABELED FOR EASY SCHEMATIC PLACEMENT. SCREEN LUA, SAME BASIC DIMENSIONS AS OUR OTHER FACTORIES SO THEY WILL ALL LINE UP NICELY. LIKE ALL OUR FACTORIES; EVERYTHING IS CONTAINER HUBBED FOR EASY EXPANSION, COMES WITH DISCORD AND IN GAME SUPPORT DISCORD: THE PYRAMID CO, https://discord.gg/MsMDcbgWBB CHECK OUT OUR SPACE CORE VERSION! MAKES THE SAME AMOUNT AS OUR STATIC VERSION!

Control Tower LC-02 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

putting big L core stations together is fine but when you want to break up the monotony, give this connector module a whirl. Still an L core but a little smaller to add some depth to your modular stations. Features a nice throughfare windowed walkway to transit between cores and also look out over the 10 XS sized landing pads. Check it out in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42319.9264,202282.6245,33492.4846}

50% off blueprint price at the moment on dispenser Loadeds industries presents large core space station with landing pad and open hangar space, blue print dispensor can be found at my base location, any questions please dm me on discord

In the process of moving, blueprints are available to Kosmos Exchange. Fun and Funky little space station. You too can create a nice little home in space with this station. Landing pad on top, nice spacious hangar, plenty of room for industry and storage all in a colorful package. Easy to expand with access doors on 3 sides to add more landing space. Industry area has a couple of different expandable set up options for your convenience. Plenty of space for parts storage as well. Gates are not included in the blueprint to help lower deployment costs. T1 Honeycomb. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

50% off blueprint price at the moment on dispenser This is a complete kit of my landing pad without basement, you can make any size landing pad you like even connect 4 cores together for extra large one or even larger, ive tried to make the instructions as simple as i can but hopefully if your interested in this kit you already know how to copy and paste and rotate etc please check out the pictures for more info and if you need any questions answered dm me on discord loaded#2378, location on your right in the info and the dispensor is in front on the landing pad, i also added a base part with no wiring details also u will want plenty of medium glass panel to go over the wiring detail, can also change the colour to your what ever you like. PS no need to press shift when adding the leg stands

A Lighthouse.... Illuminates your way back home. VR to "Alioth Marina" Drm free in case you want to transfer the Lighttower to your own static core, there are full instructions for configuring the lighting included on an info button