Dual Universe Creators

New pads from The Gray Order (changed name from ADMI to Gray) Large core fully detailed with easy to use placement the footings are a basic voxel shape so if you need to make it taller is super easy! There are 2 dispensers one for regular 6mil and other is for discount option if you want 10 for 10mil off ( 50mil instead of 60mil) thanks for shopping cords for base are same VR "ADMI build store" position ::pos{0,2,-24.6313,16.8071,150.4663} name subject to change soon will alter here too.

In the process of moving, blueprints are available to Kosmos Exchange. Fun and Funky little space station. You too can create a nice little home in space with this station. Landing pad on top, nice spacious hangar, plenty of room for industry and storage all in a colorful package. Easy to expand with access doors on 3 sides to add more landing space. Industry area has a couple of different expandable set up options for your convenience. Plenty of space for parts storage as well. Gates are not included in the blueprint to help lower deployment costs. T1 Honeycomb. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

putting big L core stations together is fine but when you want to break up the monotony, give this connector module a whirl. Still an L core but a little smaller to add some depth to your modular stations. Features a nice throughfare windowed walkway to transit between cores and also look out over the 10 XS sized landing pads. Check it out in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42319.9264,202282.6245,33492.4846}

Will be updating store location for release in weekish atm emladra#8532 is available if you wish to purchase anything. Hoping to be setup with new store on madis in a week possibly 2 depending on resources lol. ( X2 blueprints per purchase!) A small core version of my outpost miner this one is the mini! is a small core design that has room for easy 10 large containers in building the bp only has 2 placed and only 1 basic L autominer placed. Has 6 slots total for the autominers in case you wish to add more later uses just 970m of voxels so easy to construct all aluminum so as to be easy to build and quick to place. the skirt around the edge is rather tall to help place it on uneven terrain and still look right. The 1.5 mil buys you 2 of the mining units bps so just in case you mess up placing one you still have another! thanks for looking and let me know if you have questions about it! emladra#8532 all of my stuff is available on madis at cords- ::pos{0,1,-53.2259,-47.4236,827.1160}

VR: "VO Factory Sales" This will produce all Uncommon Engines 24 Hour Production with no talents Uncommon Military Atmospheric Engine XS - x240 Uncommon Military Atmospheric Engine S - x60 Uncommon Military Atmospheric Engine M - x15 Uncommon Military Atmospheric Engine L - x3.75 Uncommon Military Space Engine XS - x240 Uncommon Military Space Engine S - x60 Uncommon Military Space Engine M - x15 Uncommon Military Space Engine L - x3.75 Uncommon Military Space Engine XL - x1.8 Uncommon Military Hover Engine S - x63.8 Uncommon Military Hover Engine M - x15 Uncommon Military Hover Engine L - x3.9 Uncommon Military Flat Hover Engine L - x3.9 Uncommon Military Vertical Booster M - x15 Uncommon Military Vertical Booster XS - x254.8 Uncommon Military Vertical Booster S - x63.8 Uncommon Military Vertical Booster L - x3.9

Does your organization/guild have frequent requests for random batches of voxels? Do you find it time-consuming to process all of these orders manually? Enter the Vox in a Box! This is an M-core deployable factory that your org can use to make any kind of voxel, of any tier, whenever they want, independent of the member's talents and without involving Legates or factory managers. Members just place the order with the ordering terminal at their own convenience, return a few minutes later, and collect their voxels in the output bin. Delivers with L5 industry talents. Want to limit the factory usage to just guild members? Want to limit the maximum size of the orders? Or disable one or more tiers entirely? No problem - You have control over the orders placed. Please inquire with any questions! (This version is better suited to guild requests; a larger version for volume industry sales is scheduled for release later) Thanks! GwennieAerlin (in DU) / gwennie_aerlynn#0 (on Discord) Pink Flamingo Industries / Shadow Union Available on Alioth at: ::pos{0,2,45.8947,92.0805,15.8965} VR Pod name: "Shadow Union Alioth Showroom" (Don't buy in VR!) Setup instructions/parts list: http://shadowpublic.kitsune.cc

In the process of moving, blueprints are available to Kosmos Exchange. Next up in modular factories is Czars Space Fuel Factory. Making Nitron and up to 2 styles of Kergon. Add it onto one of my Space BigLandyPaddys for full autonomy in space. Command center with Jerichos Storage LUA and My Hub screens. See it in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42006.4114,202236.9961,33625.3975}

M core Outpost with T1 pure material production, fuel and honeycomb Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store XS Core size Elevator dock on top

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Welcome to the Dark Forges Scrapyard. VR: DARK FORGES HQ The idea of the Scrapyard is that new players can come and buy elemets that you had on your constructs that's totally destroyed and do not have the quanta to buy/make a new one. Or for the old experienced player that are building new stuff and need to test and experiment with maby a new heat shield etc, so instead of buying/making new stuff, you can save some of your hard earned quanta by paying us a visit. The DAFO think with this idea you bring more to the game, yes you can dismantle an element. But you never know what you will get out of it due to the random component you get. And so to sell the element or even a ship, you can get more out of it. Because face it, you will have more of use of an UNC.atmo L engine, even if you just can repair it 1-2 times more, than one UNC.reinforced frame in your pocket. And yes. We even sell ships at the Scrapyard. We sell them either repaird, with elements that do not have full repairtimes on them, or unrepaird so you can get it cheaper and need to repair it your self. We even buy elements that's broken, the repairtimes are what determines the price of the element/ship that we are looking at to buy. So if you are a scavanger come by and show us what you have. If you are a new or old player looking to save some quanta come on by and check whats in stock. For the best updated prices, head on over to DAFO discord, and check out the Scrapyard chanel. !REMEMBER! The items at the Scrapyard change all the time. So you will need to check out the discord, or visit to see whats in stock!!

*Updated 11/1/22* Now includes Jericho's MU-Monitor Pre-Installed. Simply add MUs and link them to the programming board to see all info on one screen!! New BPs Available at D4nkWorks Showroom These are Long-Term Mining Towers with space for 8 Auto-Miners Designed to fit ANY terrain. The bottom of the tower can be sunken into the land as far as needed and has ladders for access from the ground. Add a surrogate pad and you can easily VR there to calibrate your off-world tiles. The landing pad on top fits S core ships easily and provides EZ access to all 8 miners and the Hub. Landing activates the screen which shows how much ore is currently available. LUA included. Basic Mining Towers have space for your Org name on the side to let people know who's mining in style!

50% off blueprint price at the moment on dispenser This is a kit for the outpost landing pad as picture this kit is not for beginners its best suited for anyone that knows the fundamental of how to copy and paste and rotate etc in game, there is some over lapping you will also have to do as this pad design is very large but follow the link below and hopefully ive made it clear enough :) link for instructions to follow https://imgur.com/a/ZKcLP2q for VR please search loaded industries showroom

A simple Mine site with a Large container and 4 MU, a screen and a keyboard. Token is a full package that you can deploy where you want. Version exist with Script to display MU Statistic on screen.

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

In the process of moving, blueprints are available to Kosmos Exchange. Space!!!! It's got electrolytes. It's time to upgrade from that voxel thick landing pad with containers strewn about? You'd like some style? You like furniture from Ikea? Look no further, I've got you covered with the new modular series of stations offering you usability and looks in one package. This station features ample landing and hangars for XS-M size ships. A big pass-through hangar for building or parking up to M core ships, 3 XS core hangars and 3 wide XS-S hangars. In addition, there is a ton of storage space, about 2 M cores worth of factory space, and plenty of space for you to customize living spaces. With the new blueprint snap, adding additional modules (coming soon) will be a breeze and seamless to help make your space experience more immersive. All future modules will have connection points with transition stairs or walkways to make moving between cores easy. Moving to space starts here See it in VR at "Czar in Space Showroom" Dispensers are there too