Dual Universe Creators

Derrick (Nodding Donkey, Pump Jack) Mining Unit. Holds 4 Mining unit L. 1x L container with Hub. Screens and board for Lua. Space underneath for Ore Collection. Comes with 4 Basic MUs, 1 L Container, 1 Hub, 2 Screens, Prog Board, Vr Pod, lights etc.. Most Voxels in Iron. All Basic Stuff

VR "VO Factory Sales" We are also located at the Alioth Exchange in the Red Isle ----Please be sure to add 5 liters of Catalyst 3 in container it labeled for at the initial start. After that it will produce its own!---- Warp Cell Factory will produce around 288 warp cells a day with no talents. Boosted will produce up to 355 a day depending on your talents. This Factory is Available On Ground and Space!! For anyone that wants the BP. Everything is labeled for easy setup! We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

XDM tower is a 3 L core tall stack, 258m tall to the roof, and 333m to the very tip. Featured in the outpost museum. Contact: Actimist#4020 Primary designer: MadManWithABlueBox Contributors: Sinjin Factory worker: Visit NovaX showroom here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

In the process of moving, blueprints are available to Kosmos Exchange. Next up in modular factories is Czars Space Fuel Factory. Making Nitron and up to 2 styles of Kergon. Add it onto one of my Space BigLandyPaddys for full autonomy in space. Command center with Jerichos Storage LUA and My Hub screens. See it in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42006.4114,202236.9961,33625.3975}

Landfall pads as used in beta (large static core) has small and xs core landing zones lined out. Located on alioth at new store. VR "ADMI build store" position ::pos{0,2,-24.6313,16.8071,150.4663} for landing zone at store. thanks for looking updating builds as i can questions ask emladra#8532

In the middle of a move, contact me via discord to arrange a sale. Need easy to set up landing pad in space? Look no further! M core landing pad with 2 tiers and plenty of hidden storage capabilities. Fits together with my fidget stations and other landing pads for a seamless space experience. Too Big? Try my S core landing pad. Too Small? Try my L core BigLandyPad set See it in VR at "Czar in Space" or in person here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

As the Rock Raiders continued their expanse they started finding, stealing, and then revamping UEF designs. One of their hauls was a sub orbital platform. Given their ingenuity they were able to drop off a haul of T1 ore and have it automatically processed into Nitron and Kergon X5 at the same time. The only maintenance to this system is the occasional purge of oxygen and hydrogen once in a while while there to fuel up Rock Raider ships. Features: - 300KL of storage for Fuel & Ore - 150KL of storage for Pure T1 & Oxy/Hydro - Remote control and Status & Inventory checks. (VR) - Remote ability to move Raw Ore from Parcel to Processing Storage - Shipments of ore by contract haulers. (Parcel XL) - Higher Tier Ore shipments down to surface market to sell (Parcel XL) Top Hub: Ore & Fuel Access Bottom Hub: Pure T1 & storage Oxy/Hydro for purging.

Update 2.0 also i trade for ore on bps so if you dont want to use your quanta i trade for ore. There are 2 versions of this one with 5 containers placed as in picture for reference on placing and one without both are the same price. Available at alioth vr "admi build store" for location and such will be building onto this location as time goes foward and sales too lol.

Nemesis Harvester Unit. Reverse engineered from ruins uncovered at Obsidian Dragon Headquarters. These Alien Mining Unit are out of this world! Available Harvester X1 set for 1 Miner 250k xs core Harvester X2 set for 2 miners 500k xs core Harvester X4 set for 4 miners 1million s core VR Dracks ShowRoom

Landfall pads (large static core) medium and xs core marked landing zones on pads. VR ADMI build store or position ::pos{0,2,-24.6313,16.8071,150.4663} on alioth. questions emladra#8532.

The IC Citadel Station is an all-purpose single core space station designed with future PVP in mind. Currently we are only selling Blueprints. The blueprint does not include the Warp Beacon or weapons to make it easier to place. Armor: 4 to 12 meters of Nickel, Copper, and Steel armor. Weapons: 8 Gunner seats with a total of 64 hardpoints for weapon placement Storage: 80 Large containers linked to 8 hubs. Industry: Warp Cell Production ~550 warp cells per 24 hours Fuel Production - Kergon X1, X2, and X3 (or change schematics to make whatever you want) Scrap Production - Tier1 - Tier5 Repair: 4 Repair stations, each linked to 5 large containers

The X50 is the big brother of the X40. It is uppgraded with a L container and 8 L MU´s, you can mine all that you need. And with the X50 there are coming a an uppgrade that will blow you mind so keep an eye out on this one!

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Simple' version, a lower cost entry into the Omnifactory with minimal industry elements required to deploy. This does mean expanding capacity is a little more involved than the up-coming 'Expanded' version, requiring each new industry machine to be linked to each component storage directly. However, the layout configuration and open structure allow this to be accomplished with minimal effort. BP dispenser is set up inside the Omnifactory for a extremely reasonable price of 25Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)