Dual Universe Creators

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

2 Large Static Core Factory. Made for the most enthusiastic Factory Manager. Features placement pads & sign placement for all machines. Catwalks for easy access and a large Landing pad up top. Tons of room for storage, May take years to fill up!!!,,bit of an exaggeration here. Large enough to handle any sized organization. Come Visit at "Rifter Shipworks" public VR BP's Avail here ::pos{0,22,-32.0802,58.7871,-17.5292}

Back by popular demand! My #1 selling space factory shell. Ample room to run any type of industry and plenty of room for storage. The base is a full L core footprint, and there is a full L core landing pad on the roof for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

This Is a Ore to Fuel Refinery. Makes all Fuel types (One fuel per core) 20 Refiners. 10 Chemical Industry. 14 Expanded Container XXL. Transfer units very on fuel type. Concrete can be replaced with brick for almost same effect.

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

2B Designs Duo Hangar 2x L Core Size Hangar - Plenty of Workspace (Can fit L core ship) - Plenty of light - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - 2xL Core Size Landing pad - Elevator / Hole Access to the floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) Make sure to over lap the middle of the cores to fit together VR: "2B Hangars Display" Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

Greetings! I will build you a customized factory based off of the layout I use for my own personal factory. My factories are always easy to understand and to expand upon. You're welcome to check it out in VR at "PvP Shop". Pictures are from another build I am currently selling. Reach out to me on discord for more information. TMA#0001

NovaX is proud to present this stunning, modern living space. Created and built by Zoltos. This 3 bedroom living space features a XL screen swimming pool decoration, miniature tennis court, fully fitted kitchen, 2 and a half large bathrooms and a separate outhouse for guests. Contact: Actimist#4020 Primary designer: Zoltos Contributors: Actimist Visit here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check you joins before you deploy construct.

PYRAMID OF KHUFU PERFECT SCALE REPLICA OF THE GREAT PYRAMID OF GIZA LARGEST POSSIBLE ON AN L CORE PERFECT 3-4-5 TRIANGLE 20,000 M3 VOXELS 2 ELEVATORS 50 M3 LUMIN GLASS THERE IS AN OPENING ON THE LEFT THAT ALLOWS EASY ACCESS FOR BUILDING WHICH CAN EASILY BE CLOSED WITH THE LINE TOOL. THERE IS ALSO A SECOND CAPSTONE INSIDE NOT MADE OF LUMEN GLASS TO AID IN GETTING CREATIVE WITH THE COLORS THE PYRAMID TOP CAN BE.

Hadron Mining Platform 8 Designed around our signature Hadron theme, the Mining Platform 8 delivers style and function to any outpost or mining operation. Comes equipped with 4x L Basic Containers and each mining unit housing includes markers for quick and easy placement. Utilizing Jericho’s Mining script, you’ll have all the information you need to keep on top of your mining game. From timers to calibration percentages, miner up time and more at a glance. A single detection zone activates the mining script and lighting so no more running around in the dark with a pen and paper. The centralized VR station provides instant access to all mining units on the platform without the need to move from the spot. When deploying the platform, make sure the stairs and the voxel square at the bottom of the platform are above the surface of the terrain. This will ensure you have access to the containers if you choose to swap them out. The raised platform and circular arrangement of the mining units allow the bonus ore to spawn in a ring around the construct allowing for ease of access when collecting. Check it out in our showroom! ---- Available after release. ----

Are you waiting around standing in the dust or snow for your Mining Units calibration to cycle? For those that want a little bit of luxury while tending you Mining Units, look no further than the new DIA Mining Apartment tower ! Featuring an executive class apartment with 360degree views covering an expansive living area, kitchen and dining, bedroom, bathroom and balcony office, topped off with a personal landing pad - all on top of a self-contained Mining Unit hall and ore collection atrium. The MU hall can accommodate up to 8 MU's and link to a central XL Container accesable from within the apartment via a Hub. Admire the incredible views from the lap of luxury, while your MU's do the work of making you quanta! Come and see the Show Tower on view at the DIA Plaza, with BP's being available from the Showroom adjacent.

Luxury pads that where originally built in beta and now redone with better skills. Large core uses mostly plastics and some wood there is a little bit of gold but not enough to break a bank! P.S. there is a little copper in the bp i havnt located yet swap this out for the gold is like 0.69m3 of it. Will be working on roads for this pad in the future thanks for looking!!! Located at ::pos{0,2,-24.6984,16.9672,135.7213} on alioth. Can vr temporary location of surrogate at ADMI store temp.

A nice litle house for you to relax in, or have it as an office away from office. And when you just need to chill, why not cook a nice steak on the grill on the deck, looking out over the sea.

Another Star Wars Galaxies tribute build dedicated to the countless hours spent waiting for the shuttle. Comes in two versions, dynamic is Tatooine coloring, Static has Imperial (dark). Pairs perfect with the 'Tatooine Trading Post' https://du-creators.org/makers/MrLightWell/ship/SWG%20Tatooine%20Trading%20Post