Dual Universe Creators

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

The X50 is the big brother of the X40. It is uppgraded with a L container and 8 L MU´s, you can mine all that you need. And with the X50 there are coming a an uppgrade that will blow you mind so keep an eye out on this one!

A fully set up fuel and warp cells space module. 72 cells per day without any talent, Kergon, Nitron and Xeron fuels Custom LUA to manage and monitor production Uses two main hub with each 10x containers L: Ore & schematics hub: Input hub for all schematics and ores except pyrite Fuel / Pyrite / Catalyst3: Output hub for fuel and cells. Also used as input for pyrite and catalyst (optional and only used to speed up initialization) To start production, go down to bottom level and run each board (7) until screens go green. Those will set up each machine by selecting recipes and start them with correct maintain values. Special thanks to Captain Ardan and RyanPryde for their voxel kits and Jericho and SilverZero for LUA resources https://github.com/Krengus/DU_ASTco/blob/main/Warp%20%26%20Fuel%20Space%20Module/monitor.json

XS Core Bunker. At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} More Comming Soon!

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO

Control Tower LC-02 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

A full functioning Fuel Factory. Just place raw Ores in the containers and add Shemas. And the factory sells the fuel how you adjust the dispensers. Blueprint Dispenser is inside the Fuel Factory to find ::pos{0,2,21.5954,103.3399,0.5821} For futher Updates or bulk interests contact ingame "Olivilo" or "Samsara" or just write in Discord. Have a nice day.

The CCU Crane Set. Do u need a crane for your heavy lifting jobs? Then CCU has a very nice and modular crane for u. This heavy duty crane will make any lifting a piece of cake. It has a turning radius of 0 ( cause DU dos not allow us to ) It can lift up to any amount ( tested at 100KT ) Cable length - as long as u can make it. ( keep it responsible ) Get your crane today ! U can visit us in VR at - CCU Voxel library Or in person at our location - ::pos{0,2,34.7581,72.5932,-0.0001} (Alioth) Fun intended. But have a great day Novean ! P.S. To be able to use a heavy duty crane u need a special permit and license. It is not possible to hire a specialist crane operator.

ALL PRICED CUT FOR THE NEXT 2 MONTHS FOR BP'S NO TOKENS AVAILABLE FOR THE TIME BEING "Some vermit alien stole!!!!??? my gas station and dragged it up into space!!!" Its a labor of fun really a simply easy to run gas station with all fuel types ready to pump out for your use in space. No lua no mad scripts just put in your ore and let the machines run and it all just simply works no need to make a large crazy factory for gas. Just keep this beast fed it will keep you flying. I'm not doing tokens and the schematics needed are below. Hope everyone likes it and comes and gets one for themselves. VR to Broken Skull Ship Shop

Tired of pads being too small for your need? Zealot Company has your needs covered with this quadcore landing pad! It has a complete interior for your storage needs and elevators for mobility around the structure. Stop by for an in-game look at ::pos{0,2,-23.5467,16.8591,36.0142}, you can purchase the bp at ADMI Build Store at the Zealot Company dispensers. Note: Due to the snap tool not overlapping element with voxels each pad has its own set of elevators, some will need to be deleted, if you want and then centered.

At daytime a fairly normal looking tower, but at night it seems to be burning. 5,000,000 quanta for a batch of 8 blueprint copies. Dispenser is in the penthouse underneath the landing pad in the top of the tower. Deploying strategy: 1. deploy the base core 2. deploy the North core, then the East, then the South and then the West core 3. deploy the first floor on the base core 4. deploy the second floor on the first floor 5. the second floor bp copy is DRM free so you can mulitply it to make your Lotus tower higher 6. deploy the top floor on the final second floor core NOTE! Possible problems: while connecting the North, East, South and West cores to the base core you may have to remove glass panels from the base (4 in the center) and then place them back when the core is placed. Check out the tower in VR: The Burning Lotus or visit at location: ::pos{0,2,40.7757,116.8397,0.0000} Have fun!

Container Cover DRM free available in "Hagbards Marina" ::pos{0,2,38.3245,62.6634,4.6699} VR: "Hagbards Marina" it comes with a recolor kit, so you can easy paint it the way you want it please find the parts/Materials List in the picture gallery. Important notice: some of the Voxels are in Offset, i have placed some adjustors xs as handles, to make it easier to grab them.

Put your favorite cantina song on repeat as you plan your next builds and adventures. All are welcome, but your droids will have to wait outside! During beta I asked myself the question, what hadn't been made yet that people would love to see in the world of DU. After looking over nearly every frame of the cantina ever shown on film, every available blueprint online, former cantinas designed in all popular SW games, and even the entire PDF for Lego's step-by-step instructions - I felt prepared to bring the iconic location to life. All in all took about a month of casual playing to build/finalize. Static Model of the Cantina is on display at LSA Industries HQ, 13Km SE of Alioth Exchange (VR Location 'LSA Industries Alioth') *What is on display is what is on the blueprint, all furnishings, screens, lights, chairs, etc

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

50% off blueprint price at the moment on dispenser This is a kit for the outpost landing pad as picture this kit is not for beginners its best suited for anyone that knows the fundamental of how to copy and paste and rotate etc in game, there is some over lapping you will also have to do as this pad design is very large but follow the link below and hopefully ive made it clear enough :) link for instructions to follow https://imgur.com/a/ZKcLP2q for VR please search loaded industries showroom