Dual Universe Creators

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO

I proudly Present the Wydee-Design warp cell factory! The warp cell factory can produce 188 warp cells a day without any talents and goes up to 240. Put the ores on the input HUb on the control room at the entry of the factory and everything is being produced for you without any action to do. Everything is well designed inside and organized in a very clear industrial layout. We bring to you lean and visual management. Production behavior: - There is enough container storage to handle a complete week production - The consumption for a week is the following: - Bauxite ~48k - Hematite ~24k - Coal ~63k - Quartz ~91k - Malachite ~18k - Limestone ~35k - Natron ~14k - Pyrite ~12k - Petalite 2.6k - Acanthite ~14k The required schematics to make this run for a WEEK are the following: - Pure product schematics P2: ~1170 - Pure product schematics P3: ~ 500 - Product schematics P1: ~1750 - Product schematics P2: ~350 - Product schematics P3: ~ 210 - Warp cell schematics: ~ 1400 All those numbers are the minimum required (with a buffer included) to make the factory running for a week with: - no talents on speed increase for production - talents lvl 5 pure P1 - talents lvl 3/4 pure P2 - talents lvl 3/4 pure P3 - talents lvl 1/4 on basic products (polycarbonate / polycalcite / polysuflide / alloys (Al-Fe, Cu-Ca-Cu-Ag / Glass (basic, advanced, Ag-Li) If your talents are a bit high than this increase the capacity to make a full run for a week by 10%. Those numbers are mentionned on the screens inside the entry hall where the materials must be inserted in front of each Hubs and maintain rules are also mentionned. To deploy the factory the entrance is in front of you when you deploy it. For BP come to see me on Haven @ ::pos{2,27,27.7968,346.8901,40.2505} or contact me on discord JamesWydee (james78650)#9448 Token are not available for now: depending on the demand I will organize myself for make those available when my talents are going to be updated to LVL 5 (in one month would be available). Come to see the factory by VR @ Wydee_ShowRoom

Marina Walkway Set Walkways with handles: - straight - 22.5° - 45° Stairs 45° (Z-axis) Industrial Pillar with attachment for the Walkways drm free VR: "Alioth Marina"

Ikara Industries presents the "Ikara Landing Pad KIT T1 (DRM Free)". You have a nice ship but you don't want to land on earth. Then the Ikara Landing Pad KIT T1 is just what you need. The landing pad kit includes - DRM Free - Staircase to the landing pad - 2 different designs - Recess for two screens Placement rules: Hold SHIFT, If you set the modules. What else you should know: Examples: Building a S Core version 4 x Modules Variant 1 Building a M Core version (one side) 4 x Module Variant 1 (4 voxels remain, just move the panels by 2 voxels in each direction) to Buy, Questions? - Message @Ikara2184#2629 on discord.

THE FACTORY EVERYONE IS GOING TO WANT PYRAMID T123 MINING BOT FACTORY THIS FACTORY MAKES T1 T2 & T3 MINING BOTS 6 T1 BOTS EVERY 2 HOURS 5 T2 BOTS EVERY 6 HOURS 5 T3 BOTS EVERY 24 HOURS NUMBERS PER HOUR CAN IMPROVE WITH HIGHER TALENTS LIKE ALL OUR FACTORIES; COMES WITH INGAME AND DISCORD SUPPORT BOOSTING TO LVL 5 AVAILABLE TOO DISCOUNTS ON PURCHASES OF 3 OR MORE FACTORIES TOTALING OVER 20MIL HAPPY MINING!

A wall made of 3006 animated lights on a dynamic core to welcome visitors :) You can see it here : ::pos{0,2,-23.9491,-10.5283,119.8070} (Yentico base in front of Alioth Market 13) To visit in VR, search "Light Wall" Peace - YesmanDu974

Roads for the ADMI Deluxe Pads easy to place and easy to change colors for! Location is the same ::pos{0,2,-24.6313,16.7490,95.7777} as the pads and vr.

Hey, you! Yes, you need a small and efficant scrap and fuel factory?? And some good script as well? Well check this one out !

PYRAMID T1-3 REFINER+FUEL FACTORY This factory does just what it says. Also makes nitron and X1-4 fuel from byproducts and 2 adjustable transfer units to control how much is made. 8 basic refiners to keep up with most schematic demands. Easy use: Ore in, Waste Out, Product Out format All container hubbed for easy expansion! READ OUR BIO FOR MORE INFO

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

The God of the Sea had a close association with horses. In some myths he is the father of horses, either by spilling his seed upon a rock or by mating with a creature who then gave birth to the first horse. BP dispenser located on Alioth at - ::pos{0,2,20.3521,99.5788,18.0258} Second BP dispenser located in Space at - ::pos{0,0,-88183.9516,381273.0677,73479.7930}

12 Large (static) core runway 2x6. full built with skirt runway is all at the top of the cores so can make skirt taller if desired to put stuff under it. Will be making another much larger version in the future after i make more quanta! vr Admi build store or visit at ::pos{0,2,-24.6842,16.8702,151.5735} runway is outside the landing zone for display will eventually put the landfall pads around it as they are built for it. Thanks for looking and buying and all that stuff!!!!!

Hadron Mining Platform 4 Designed around our signature Hadron theme, the Mining Platform 4 delivers style and function to any outpost or mining operation. Comes equipped with 1x M Basic Containers and each mining unit housing includes markers for quick and easy placement. The centralized VR station provides instant access to all mining units on the platform without the need to move from the spot. When deploying the platform, make sure the stairs and the voxel square at the bottom of the platform are above the surface of the terrain. This will ensure you have access to the container if you choose to swap it out. The raised platform and circular arrangement of the mining units allow the bonus ore to spawn in a ring around the construct allowing for ease of access when collecting.

2 Large Static Core Factory. Made for the most enthusiastic Factory Manager. Features placement pads & sign placement for all machines. Catwalks for easy access and a large Landing pad up top. Tons of room for storage, May take years to fill up!!!,,bit of an exaggeration here. Large enough to handle any sized organization. Come Visit at "Rifter Shipworks" public VR BP's Avail here ::pos{0,22,-32.0802,58.7871,-17.5292}

Modern, spacious and affordable accommodation. The wooden style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony at the back of the 2nd floor provides a great opportunity for spectacular views, while on the ground floor, a dirt bed in front of the large windows provides a natural touch. Built on the middle of the construction grid allows for the owners to expand downwards to provide several basement levels. With plenty of ground space around the condo, several personal speeders can be parked nearby and/or develop more landscaping for natural views and enjoyments. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}