Dual Universe Creators

Static construct for mining units. DRM FREE S core 3 L container for up to 576kL. (lvl5 container skill) Over two weeks storage of mining an 600L/h T1 Field. Space for 12 mining units and 2 reinfocred sliding doors (Not included in BP) Containers/Surrogate etc. can be removed after placement with no impact on design. Could also fit forcefields (prepared on 4 sides) if you need ramps. Room for custom voxel letters on 2 sides. (See picture, BP is blank) Shopping List: S Core (Nano craftable) Ressurection Node/ VR Pod VR Station (Nano craftable) 3L Container + Hub 94m3Orange Plastic (Nano craftable) 408m3 Gray Plastic Visit my VR on alioth. VR: Hadron HQ Alioth

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

Hadron Landing Pad Medium ---Features:--- Detailed voxelwork. Only Tier 1 voxel used. 800m3 Plastic 200m3 Brick 16 easy to place L-Container storage. Plenty of space for adding additional industry like a fuel refinery. With the voxel preview and the coming core snap feature, the pad will easily integrate with your base. Centered to the build box of the M core to allow for more storage or industry below. Visit our showroom in VR (outside area).

THE FACTORY EVERYONE IS GOING TO WANT PYRAMID T123 MINING BOT FACTORY THIS FACTORY MAKES T1 T2 & T3 MINING BOTS 6 T1 BOTS EVERY 2 HOURS 5 T2 BOTS EVERY 6 HOURS 5 T3 BOTS EVERY 24 HOURS NUMBERS PER HOUR CAN IMPROVE WITH HIGHER TALENTS LIKE ALL OUR FACTORIES; COMES WITH INGAME AND DISCORD SUPPORT BOOSTING TO LVL 5 AVAILABLE TOO DISCOUNTS ON PURCHASES OF 3 OR MORE FACTORIES TOTALING OVER 20MIL HAPPY MINING!

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

PYRAMID T1-3 REFINER+FUEL FACTORY This factory does just what it says. Also makes nitron and X1-4 fuel from byproducts and 2 adjustable transfer units to control how much is made. 8 basic refiners to keep up with most schematic demands. Easy use: Ore in, Waste Out, Product Out format All container hubbed for easy expansion! READ OUR BIO FOR MORE INFO

DPS Pads - built as building area pads, also usable as showroom and parking pads. Single static XS 2,500,000) and S (3,000,000) BPs DRM protected. DRM free BIY kit and space versions available soon. VR: Deeh Store (dispenser + preview -> basement) If you have questions, don't be shy - contact me on Discord!

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura L6 is part of our Lightweight Series. Designed to have a lot fewer elements and also cut down on Honeycomb usage. The L Series is a cheap, lightweight alternative for those needed fast deployment of rigs. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/TB2ecEd5rs --- Buy Locations --- Locura Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura Alpha Base -- Other VR Locations -- Locura Exchange

50% off blueprint price at the moment on dispenser A stylish workshop for building XS,S,M core's, plenty of room for deploying your voxel library cores with storage on platform and plenty of freedom to customise your workshop inside like copy and past all your voxel librarys to the inner walls and corners of the workshop for easy access for when your building, placement rules are 1 click down and the enterances are facing you when u deploy the BP you can check it out in VR search for loaded industries showroom for anyone that purchased before 7th may please let me know and i come and release the drm on your building

Luxury pads that where originally built in beta and now redone with better skills. Large core uses mostly plastics and some wood there is a little bit of gold but not enough to break a bank! P.S. there is a little copper in the bp i havnt located yet swap this out for the gold is like 0.69m3 of it. Will be working on roads for this pad in the future thanks for looking!!! Located at ::pos{0,2,-24.6984,16.9672,135.7213} on alioth. Can vr temporary location of surrogate at ADMI store temp.

50% off blueprint price at the moment on dispenser This kit will allow you to make any size hangar you like over as many cores as you like just like my landing pad kit and you can take this kit any where ground or space, there are endless possibilities with this kit, when using the kit there are some thin voxels on parts of the design like bolts etc make sure you grab all when copying, there will be some small patches you will need to fill on roof due to the angles there is also a limited offer at my location aswell for this blue print with the pre built hangar blueprint any questions please dm me on discord.

Pyramid Container Factory: OUR TOP SELLER Can run 2 L schematics or 2 M schematics or 1 L 1 M simultaneously. producing 16L or 32 M per day. or 12 L and 24 M. At the same time it will produce S, XS containers @ 48 and 96 per day simple design. Ore in, waste out, product out. everything is container hubbed for easy expansion. READ OUR BIO FOR MORE INFO