Dual Universe Creators

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura L6 is part of our Lightweight Series. Designed to have a lot fewer elements and also cut down on Honeycomb usage. The L Series is a cheap, lightweight alternative for those needed fast deployment of rigs. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Are you waiting around standing in the dust or snow for your Mining Units calibration to cycle? For those that want a little bit of luxury while tending you Mining Units, look no further than the new DIA Mining Apartment tower ! Featuring an executive class apartment with 360degree views covering an expansive living area, kitchen and dining, bedroom, bathroom and balcony office, topped off with a personal landing pad - all on top of a self-contained Mining Unit hall and ore collection atrium. The MU hall can accommodate up to 8 MU's and link to a central XL Container accesable from within the apartment via a Hub. Admire the incredible views from the lap of luxury, while your MU's do the work of making you quanta! Come and see the Show Tower on view at the DIA Plaza, with BP's being available from the Showroom adjacent.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

Modern, spacious and affordable accommodation. The wooden style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony at the back of the 2nd floor provides a great opportunity for spectacular views, while on the ground floor, a dirt bed in front of the large windows provides a natural touch. Built on the middle of the construction grid allows for the owners to expand downwards to provide several basement levels. With plenty of ground space around the condo, several personal speeders can be parked nearby and/or develop more landscaping for natural views and enjoyments. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

Tired of pads being too small for your need? Zealot Company has your needs covered with this quadcore landing pad! It has a complete interior for your storage needs and elevators for mobility around the structure. Stop by for an in-game look at ::pos{0,2,-23.5467,16.8591,36.0142}, you can purchase the bp at ADMI Build Store at the Zealot Company dispensers. Note: Due to the snap tool not overlapping element with voxels each pad has its own set of elevators, some will need to be deleted, if you want and then centered.

50% off blueprint price at the moment on dispenser This is the standalone outpost style pad, built on a large core placement rules are just 3 clicks down when your blueprint is flush with the core your stood on once you have it lined up, if your flush on soil/ground just do 2 clicks down you can view at the location written on the right of the screen or view in VR search for loaded industries showroom and your find the structure at the end of the runway, dispenser is located on the structure any question please message me on discord

This is the IC small core storage and industry building. There is enough room in the bottom for 6 10 stacks of large containers and some refiners or other industry. It includes 4 hub stations and screens and programming boards up to for easy inventory (Lua not included). It also includes a mesh floor for easy moving and linking of elements from the hub area.

Designed by AtmoCorp, a subsidiary of Infinity Corporation. The AtmoCorp T2 Outpost is the next step up from your Starter outpost. Designed to be deployed on any terrain, the T2 Outpost comes with a personal landing pad, two floors of living space, and an outdoor terrace and jacuzzi. With a Container Hub and up to ten large containers pre-installed, with T5 talents included it has a storage capacity of 1920kl. *NEW updated version includes four Basic Mining Units and a rack to hold them. If you don't plan on mining, it can be deleted. The Outpost is built on the top half of a Medium Core. It can be placed with the lower door at ground level, with half the core below the ground to allow for an underground factory. Or the core can be raised up as high as you want, and the lower door and support structure can be copy and pasted to extend it to the ground. Blueprint for sale for 5M 7km south of Market 7 ::pos{0,2,19.3915,97.2582,147.7494} Or in VR search for "AtmoCorp Alioth" DM [IC]Atmosph3rik#6658 on DISCORD with any questions.

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

This is an easy to build mining station designed with cheap elements. This station have 6 large extractors linked with a large container to receive minerals. This station is build on a S static core for modular purpose. The blueprint can be find inside a dispenser on Alioth : ::pos{0,2,46.6090,96.4753,134.4049} The dispenser is on the rooftop.

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

ALL PRICED CUT FOR THE NEXT 2 MONTHS FOR BP'S NO TOKENS AVAILABLE FOR THE TIME BEING "Some vermit alien stole!!!!??? my gas station and dragged it up into space!!!" Its a labor of fun really a simply easy to run gas station with all fuel types ready to pump out for your use in space. No lua no mad scripts just put in your ore and let the machines run and it all just simply works no need to make a large crazy factory for gas. Just keep this beast fed it will keep you flying. I'm not doing tokens and the schematics needed are below. Hope everyone likes it and comes and gets one for themselves. VR to Broken Skull Ship Shop

This is the first construct I designed in beta. (Almost) free blueprint with No DRM. That means you can deploy one copy, then create your own core blueprint to make as many more as you require. Classic "Brutalist" style in concrete, iron and glass. Space for up to 8 miners. Surrogate pod for VR calibrating. Luminescent glass! Chimneys! Dispenser at Hadron HQ Alioth ( ::pos{0,2,-21.7618,122.5465,114.3602} ) When placing, the opening at the base faces away and to your right, 45 degrees from straight ahead. Rotate so that corner faces you and the opening will be facing you. The concrete foundation is 7 voxels high and can be set down to accommodate most terrain on Alioth with minimal or no flattening.

Hey, you! Yes, you need a small and efficant scrap and fuel factory?? And some good script as well? Well check this one out !