Dual Universe Creators

2 Large Static Core Factory. Made for the most enthusiastic Factory Manager. Features placement pads & sign placement for all machines. Catwalks for easy access and a large Landing pad up top. Tons of room for storage, May take years to fill up!!!,,bit of an exaggeration here. Large enough to handle any sized organization. Come Visit at "Rifter Shipworks" public VR BP's Avail here ::pos{0,22,-32.0802,58.7871,-17.5292}

Landfall pads (large static core) medium and xs core marked landing zones on pads. VR ADMI build store or position ::pos{0,2,-24.6313,16.8071,150.4663} on alioth. questions emladra#8532.

VR "VO Factory Sales" We are also located at the Alioth Exchange in the Red Isle ----Please be sure to add 5 liters of Catalyst 3 in container it labeled for at the initial start. After that it will produce its own!---- Warp Cell Factory will produce around 288 warp cells a day with no talents. Boosted will produce up to 355 a day depending on your talents. This Factory is Available On Ground and Space!! For anyone that wants the BP. Everything is labeled for easy setup! We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

Put your favorite cantina song on repeat as you plan your next builds and adventures. All are welcome, but your droids will have to wait outside! During beta I asked myself the question, what hadn't been made yet that people would love to see in the world of DU. After looking over nearly every frame of the cantina ever shown on film, every available blueprint online, former cantinas designed in all popular SW games, and even the entire PDF for Lego's step-by-step instructions - I felt prepared to bring the iconic location to life. All in all took about a month of casual playing to build/finalize. Static Model of the Cantina is on display at LSA Industries HQ, 13Km SE of Alioth Exchange (VR Location 'LSA Industries Alioth') *What is on display is what is on the blueprint, all furnishings, screens, lights, chairs, etc

Landfall pads large core landing zone. vr ADMI Build Store or visit ::pos{0,2,-24.6313,16.8071,150.4663}. (Large static core) questions emladra#8532

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

The newest addition to Terran empires buildings. This is the mining plattform Terran Excavator (TE), that are adressed to the new players. But yet at the same time to the experianced player, who can use it for higher tiers of ore due to the low cost. There are room for two (2) Mining units. and a capacaty of mining storage of 48 KL (With talents), in 4 small containers on the roof. There are also room for two (2) small parcel containers outside, if needed to use the mission system. And ofcourse there are even a resnode, vr station and vr pod installed. And there are still more room for you to add more storage. The "TE" is coming in five different tiers of MU´s. Basic Uncommon Advanced Rare Exotic The (*) shows witch one are up for a full package sale. We even have the "Territory helper" scrip installed for you to keep track on the cost for your tiles.

In the process of moving, blueprints are available to Kosmos Exchange. Fun and Funky little space station. You too can create a nice little home in space with this station. Landing pad on top, nice spacious hangar, plenty of room for industry and storage all in a colorful package. Easy to expand with access doors on 3 sides to add more landing space. Industry area has a couple of different expandable set up options for your convenience. Plenty of space for parts storage as well. Gates are not included in the blueprint to help lower deployment costs. T1 Honeycomb. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

A nice litle house for you to relax in, or have it as an office away from office. And when you just need to chill, why not cook a nice steak on the grill on the deck, looking out over the sea.

Available at Coords: ::pos{0,2,38.9120,109.2847,89.6767} is this beautiful 8-bay mining station! - Plenty of room below to collect ore processed from calibrations - Basic Container M to collect ore, with a beautiful shroud to cover - Shrouded mining units - Easy Access - Up to 8 Mining Units to place, no matter their size - Feel free to VR to MATTENASH INDUSTRIES to take a look before buying Friendly reminder to not buy in VR. Happy Mining!

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

Container Cover DRM free available in "Hagbards Marina" ::pos{0,2,38.3245,62.6634,4.6699} VR: "Hagbards Marina" it comes with a recolor kit, so you can easy paint it the way you want it please find the parts/Materials List in the picture gallery. Important notice: some of the Voxels are in Offset, i have placed some adjustors xs as handles, to make it easier to grab them.

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 my latest static building is a large factory you can visit in vr seacrh for loaded industries showroom and exit that building and your find this factory across runway, this large core factory pretty much takes up the full height of a large static core and comes with 5 floors, you can copy and paste more racks and place as you need them or you can even delete all racks and turn in to a showroom or anything you like, there are 2 different blueprints one with and one without a expanded small gate so you can build without spending millions on a door that you can add later if you wished, any questions please message me on discord, location to your right for dispensers and please dont buy in VR

Cool looking L sized Landing pad for AGG platforms, it has a decorational pulsor on the bottom and has at least 3 voxel layers. The pad was designed to be a "standalone" placing them close together will need a lot of work... PS: dont mind the voxel LOD artifacts in the photo's, the pad is nice and clean Come take a look at it, VR: Markii's showroom