Dual Universe Creators

Better then Dirt No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

50% off blueprint price at the moment on dispenser This kit will allow you to make any size hangar you like over as many cores as you like just like my landing pad kit and you can take this kit any where ground or space, there are endless possibilities with this kit, when using the kit there are some thin voxels on parts of the design like bolts etc make sure you grab all when copying, there will be some small patches you will need to fill on roof due to the angles there is also a limited offer at my location aswell for this blue print with the pre built hangar blueprint any questions please dm me on discord.

Ikara Industries presents the "Ikara Landing Pad KIT T2 (DRM Free)". The larger version of the Landing Pad KIT T1, with the possibility to integrate containers. The landing pad kit contains - DRM-free - Stairs to the landing pad and to the storage room - 2 different layouts - Recess for two screens - Different layouts available (e.g. door panels) Placement rules: Hold SHIFT when placing the modules. What else you should know: Examples: Building an S Core version 4 x corner modules (63 voxels each) Building an M core version (one side) - 2 x corner modules, 2 stair modules (4 voxels remain, move the panels 2 voxels inward and in each direction). - The M version can hold up to 48 L containers VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

Step up your mining ops with a Thumper Mining Laser from Dumboiz United. This S-Core mining unit is here to do some work! 4 mining units converge at a singular point, making gathering your surface harvest easier than ever! One large container is neatly stored up top, with a VR platform and container hub placed conveniently at the ground level. The core itself sits on the floor of the build box, making placement easy, and cleanup a breeze. Quit wasting time at your mining units! Calibrate 3/4 of your mining units from one spot, harvest all of the surface ore from one spot, and find your mining station from from a kilometer away with the scale and light emitted from this laser! Everyone has a platform, now. Everyone's going to have a Thumper. (Currently equipped with Basic Mining Units -- if you want to upgrade your laser, message isyron#4015, bring 4 upgraded units, and he'll do the swap and give you the BP!)

This is a modular showroom allowing you to make it your own - Each panel is available at the corners in the showroom so you can change up the outside as you see fit. There are 4 pads on the edges to show off 4 S/XS cores and plenty of space in the middle to show off an M core. Hallways underneath are leveraging the "DF Firestorm Hallways & Decor" voxel library which is also for sale (voxel library is DRM Free!!). How to find: - VR - Search for "DSI Dark Forge HQ" (do NOT buy a BP in VR!!) - ::pos{0,2,21.9994,107.1816,6.5935} - Dispenser is in front of the building, near Alioth DM7 Cronus#2214 or Firestorm#4004 on Discord if you have any questions!

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

Decorative Element drm free VR "Alioth Marina"

Here it is, the L Core deluxe do it all station! Places for everything and have it all. Parking, YES!, build a big ole factory, YES!, Build Storage, YES!. Set up a 170 element storefront, YES! You do you, this is the station to help you do all of that! L Core, 4 Main levels and 5 Mid levels Exposed modules brings a neat look to DU with color coding to differentiate the modules' purpose. Recolor kit for the module rings available. Plenty of enclosed storage or living space ready for you to make it your own. ingredient list in the pics Only elements in the blueprint are 100 some lights, 11 elevators, a surrogate station and the L Core. See it in person or in VR at "Czar in Space" Placement is Rotate 90 degrees clockwise. Starting at one voxel above the platform you want to match up with, 133 clicks down

M core with landing area on top, and one level of rooms below for decorating / small industry / storage 4 corridors to connect other modules / space elevator can be seen on VR: Aerogics Space Station *** Honeycombs *** Black Pattern Aluminium & Polished White Aluminium: metal exteriors Galvanized Black Iron & Glossy Light Gray Platic: interiors Galvanized Light Beige Steel: pipes Glossy Blue Plastic & Luminescent Icy Blue Glass: replace with color of your choice when customizing 4k alu 1.5k plastic 500 iron 100 carbon fiber / steel