Dual Universe Creators

Tri scanner for lots of scanning i updated it for the brakes update and made it a little more effecient. The IDS has 2 10 packs one of xs and one of small for material territory units and the like. also has 6 seperated xs containers in main haul for seperating scans its very stable with nice vtol and easy to balance. Available at alioth you can vr (admi build store) ill have it up there in a bit for sale again thanks! also has vtol maneuver engines so sustenation is actually zero with 500tons cargo can just hold space bar to leave atmo then punch it foward to fly away into space! small core and i did the intirior too so it looks dope also bunch of stuff for scripts if you use them i dont but i make it easy for the buyer to install. Thanks for looking!

*** Honeycombs Info *** It is recommended to reduce usage of aluminium as it became heavier. Carbon fiber is the lightest, with wood & brick next. Here is a suggestion on what to change: black pattern plastic => matte black carbon fiber galvanized black aluminium => matte black brick gray aluminium pattern => glossy gray carbon fiber polished dark gray aluminium => glossy dark gray carbon fiber polished gray aluminium => this is the main honeycomb, swap for carbon fiber or bricks depending on your preference glossy red plastic => for the colored strips, the new lumi work good there *** The HWSS Tranquility is a very efficient M core hybrid ship, able to fill pretty much every roles: Hauling & Missions: can lift 7-9kt out of alioth (without AGG, depending on pilot skills), two hubs: one with 10 containers L, the other with 3 containers L (can be increased to 7) Can be equiped with (elements not included): - Deep Space Asteroid Tracker, with an easy access from pilot seat, or that spot can also be used as landing pad for a small speeder / warp shuttle - Anti Gravity Generator, with a dedicated spot in middle of ship - L Shield on front of ship, using the "enclosed front" - 3 scanners with several spots all over the ships Quick placement guides for those elements are included via info buttons Standard version is T2: - 20x T2 military atmo - 2x T2 military XL space - 2x T2 maneuver XL space Kit provided allows to change colors and ship front to either: - Open with landing pad (can fit any XS or a tiny S core) - Enclosed, to place L shield or 4 extra containers L, and landing pad on top An insane amount of time has been spent on the voxels! Complexity is about 90% on most chunks The very first version of this ship is as old as beta and has gone through several reworks. Mk1 became a fairly popular ship, and, Thanks to all owners feedback over time, this Mk2 is a real upgrade on several aspects: more efficient, modular and pretty! Like all Aerogics ships, comes with lifetime warranty (check profile page for details)

A commercial model of the Hyperboard, which is probably the fastest and most maneuverable thing you'll ever fly in atmospheric conditions. Both atmospheric and Hybrid capable. A free entry model is also available, so everyone can have his own Hyperboard today: https://du-creators.org/makers/Taishiryu/ship/Hyperboard%20Entry%20Model How to get: - Contact me on discord: taishiryu#6188

An elevator as elegant in design as it is in operation. This is a beautifully crafted elevator which can lift 5kt. It can be set up to follow a path perpendicular to the construct from which it was launched. This will allow elevators on the same, or adjacent, aligned cores to travel parallel paths to space, and arrive in the same relative locations in space as they hold on the ground. It does not use breadcrumbs, neither does it stop to correct deviation, as deviation is continually corrected while in flight. It maintains the same flight axis at all times, so does not become confused if it gets nearer to another celestial body than whence it started. Automatic docking is standard, with an extremely simple and reliable circuit. There are two setup modes, a simple one intended for first time deployment or testing, and a precise one, which uses a programming board, intended for parallel axes use, and after moving an elevator to a new location. VR to Stellar Forge Showroom to view. Blueprints are now available at the base of the Stellar Forge tower: ::pos{0,2,40.5746,92.2619,4.9188} Both the docking circuit and the position finding programming board code are non-drm, not secret, and available to any purchaser on request.

***Release*** With release it is most likely this will be spawned with T1 engines. keep in mind the stats listed below were with T3 engines and average talents. With T1 and basic talents, 200tons cargo should be a good start, with max pilot talents you'll get closer to 500tons. Higher tier engines will then be required for more. ***BETA Version*** The latest evolution of the popular KXS ZETA hauler, now with a warp drive! Cargo capacity: with average piloting talents, 700-800 tons shall be safe (=~ 1 full container L of hematite). It can be pushed up to 1000 tons with maxed talents. Ship has two M container (= 1L) Lots of thoughts and calculations on engineering: adjustors positioning, hub on center of mass, etc. Ship will handle almost the same with or without cargo, with a very stable yaw. For optimization purpose, elements have been selected based on maxed talents. This means ship will get better as your piloting talents go up, and reach full potential at higher levels. The ZETA is powered by two large T3 military atmo and T2 maneuver space engines.

Build by Ch3w8a (Shenluan#8552), Akcroma#9718 and Nikto#8099 According to demand, there may be a waiting time for orders The Fury-class Imperial Interceptor was a starship used by the reconstituted Sith Empire during the Great Galactic War and its resultant Cold War. Fury-class, with our Arquitens, is one of our Star Wars ship for Scifi events, it has already been tested many times in great battles so the first big Star Wars event against BOO. It represents the first collaboration between HOZ and ATS which will later form SNS Sentinels. 8 Advanced Precision Laser L 8 Advanced Precision Railgun L 10 Container L 8 Uncommon Military Space Engine XL 8 Space Fuel Tank L Warp Drive L Homemade PVP and piloting script Honeycomb Gold 195m3 Iron 18169m3 Steel 50.3m3 Nickel 615m3 Luminescent Glass 4.27m3 High level weapons handling Other elements full 5/5 buff

Dot Metis is first series of Dot Interplanetary of ships that is being introduce after the release. Dot Metis is a pocketable ship with an over engineered wing left. Come and pick up your ship today. Free BP. Update: All ships come with T5 buffs, just message me in discord to find a time.

Dagda has been a name I have assigned to my workhorse class of ships. This ship, for its size, is lightweight with the primary shell consisting of Carbon Fiber, with a small amount of Aluminium and Glass Light Voxels. The canopy windshield affords spectacular views of space as you travel and the command compartment is roomy and uncluttered with moderate lighting. The ship is equipped with an Advanced Medium Shield Generator, and has four large cargo containers and one small cargo container attached to a HUB. The HUB is centrally placed in the engineering section to offer a balanced load to the vessel, while the smaller of the five containers is accessible from the command area for access to cargo. There is sufficient space in the aft engineering section of the ship to add an AGG complete with pulsor units as well as a warp drive or extra cargo containers for additional storage volume. The top deck sports enough space to land 2-3 smaller vessels to act as a carrier and even has a secured elevator preventing undesired access to the ship. Seating is arranged for 5 persons, and the ship has a Rez Node, 2 VR Booths for personnel that would like to do missions or visit others during the long space voyage to other planets. There is also an inbound VR Pod so that you can allow your friends to come along without them feeling like they can't leave the ship without having to hitch a ride back. ;-)~ All doors and hatches are controlled through multiple buttons which are always accessible from the main command chair, and there are several screens and programming boards that you can program with your favorite ships tools or applications.

ANDARTA_V3 ship with all parts in basic S core S shield S radar 4 missile S 3 L space engine NO HUD NO DRM CCS : 8.64M | 35% all resist in full T1 you can increase your ccs by replacing the mesh with a higher quality mesh > T1 : carbon, silicium, iron, aluminium T1.5 : plastic, steel, silumin, duralmine etc... U can visit me in VR "baxtonAeronotics" Renember, dont buy in VR !!! BP dispencer available at this position : - ::pos{0,27,13.7133,23.1457,54.8997} Have fun

Vortex Geometry is delighted to provide you with this fan machine is for you and for your friends.. Game machine "snake" ____________________________________________________________________________________________________ Everyone's old favorite - "Snake". Compete with your comrades in the record table - attached to the game, on the top screen. And also has two game modes, in the "LUA parameters" the mode "death against the walls" or "transition to the other side" ____________________________________________________________________________________________________ Key features: - The game has two modes - The game has a leaderboard ____________________________________________________________________________________________________ NOTICE!!! * When ordering more than one token, you get a discount 10%(Token). ** Software developer [VG]: SamStrand#1353 If you have any questions, or want make order - please contact me on the discord.

The Swooping Swallow is a tailored autopilot mission runner. Carry up to 5 packages for the 160kℏ Ailerons mission. Flight time 4m 30s for a single package, 4m 55s for 5 packages. Pickup, Dropoff, Home, and altitude are customizable and precise. Blueprint available at ::pos{0,2,42.5991,94.4443,189.7354}