Dual Universe Creators

Designed to be an entry for the NQ Build Your Legacy contest. Feature an all-in-one outpost for a good start and a safe place on heaven.

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

drm free VR: "Alioth Marina"

This mining factory is suitable for 8 Mining Units and 2 M Size Container or 1 L Container for Ore Storage. Build on cheap rescources it can be almost hand-crafted in your Nanocrafter. The blueprint do not contain any Mining Units or Containers. Feel free to place yourself. Get your blueprint at the dispenser. If you want to have the honeycomb and elements too, have a look on the second dispenser. You can also write me an message if blueprint is not available at the dispenser

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Expanded' version, the full on entry into the Omnifactory with all industry, transfer and storage elements configured for ease of expansion. This configuration uses 'double transfer storage' - each machine has its own primary input and output storage containers, with transfer units linking to secondary storage containers to accommodate for the onward link numbers required. Additional transfer units then feed to the primary storage of the next machines in the manufacturing sequence. Expanding the capacity of this factory is as simple as placing the new industry machine, linking the primary input and output containers and setting the machine to run the component desired, the 'racking' configuration allowing this to be accomplished with minimal effort. When thinking about purchasing and deploying this Omnifactory, do bare in mind this is a pricy investment - using over 1800 transfer units alone and requiring 7.2Mlitres of storage to deploy! It CANNOT be deployed with any particular elements deselected, as this would break the transfer system. Be warned :) BP dispenser is set up in front the Omnifactory at the DIA Plaza for a extremely reasonable price of 50Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

Thank you to everyone who was interested in this project. This has been sold to Fyrestrider. Please reach out to him in-game with any questions. This was sold as a one-time piece, DRM-Free Core BP and token. I do not have the ability to make another, only Fyrestrider does. Perso is a shore-based fixed mining platform. Originally designed for The Wendence Bauxite Meganode on Feli by the now-defunct Cracker Barrel Org. Construction started 12478 and completed early 12482, it reached peak production in 12490. Decommissioned in 12501 and transported via VTOL to its current position at Satrion Corporation's Feli Restoration Plant. ::pos{0,5,10.4711,-153.5337,18431.2520} Surrogate VR - Perso The restoration of Perso has seen multiple setbacks. Lack of interest and funds to restore the mining relic has led Satrion Corp [RION] Board of Directors to fund simple upgrades, such as auto-mining units, fuel refining, and a converted second-floor executive lounge for ore production and repair parts. Other restorations include all new lights throughout, upgraded safety barriers for NQSHA compliance, as well as all-new gas-filled windows in all areas for a comfortable mining experience. "We believe the current upgrades will more than suffice for today's demanding mining needs." Said Armand Reed, CEO and head of product development at Satrion Corp. Both lower-level and rooftop cranes are non-functioning. Stairs from first-floor offices to the second-floor executive lounge have been removed, as well as stairs to rooftop access. Elevators have been retrofitted in these areas for more dynamic access to second-floor ore refining and rooftop storage. Ground level access to fuel refining with large amounts of Nitron storage. Detection zones to auto open and close doors. A force field to the executive lounge catwalk to ensure pressurization allowing this rig to be transported to moons for non-atmospheric applications. All new electrical for the upgraded areas. Fully compliant with the current Novean Institute of Standards. All concrete sub straights have passed all inspections for compressive strength. All metal girders have received full restoration and a fresh coat of Rooster Red Paint from the Sinnen Paint Company. (Certification Available upon request) Note: This was not designed for habitation. Does not include bathroom facilities or sleeping quarters. Please check system-wide and local planetary authorities before converting for such uses. Any unauthorized conversions will be at the new owner's full expenses and liabilities. Satrion Corp [RION] is not liable for any future fines. Check with your local authorities. Features: Five Auto-Mining Units (With equipped hyperdiamond core-bits, Non-Cason Compliant) Five ore refinery stations. (Room for more, electrical not included) One Nitron Refining. One X4 Refining. (Compatible for X1, X2, X3 - Tank scrubbing required for fuel type change) All New LIghts All New Windows Upgrade pressurized doors and locks. Safety barriers installed Emergency Exit ladders have been installed. Redecking of the rooftop landing pad (NQSHA Compliant Lighting added) Satrion Corp [RION] is selling Perso as-is and does not include any warranty. It will be a DRM-free one-of-a-kind token. We will hand out our only Core Blueprint as well as the tokenized construct at the time of sale. It is recommended a certified NQSHA inspection is complete before attempted use of any lower-level or rooftop crane. You will need to make arrangements with a rigging company of your choice if you do not have the means to transport this yourself. ((This is a one-of-a-kind piece. I will not replicate this after this piece sells. I am also not keeping a copy of any blueprint or core blueprint after the sale. It will be the only one in existence unless you decide to make more blueprints))

Another Star Wars Galaxies tribute build dedicated to the countless hours spent waiting for the shuttle. Comes in two versions, dynamic is Tatooine coloring, Static has Imperial (dark). Pairs perfect with the 'Tatooine Trading Post' https://du-creators.org/makers/MrLightWell/ship/SWG%20Tatooine%20Trading%20Post

Greetings Noveans. Introducing my first upload..... my S Core fuel station. It's DRM free so you can move it onto a larger core if you wish to scale up the container storage or place it at the end of your L core runway. 3 Fuel pumps with dispensers which can be configured to your own requirements, and space to expand to 5 pumps if necessary. Shop area with cash machine , refreshment vending machines, shelving for spare ship parts (Supplied empty due to upcoming beta wipe), 4 dispenser slots to sell scrap and warp cells, and a cashiers office. The rear of the office has a small empty stock room with an elevator to the fuel refinery upstairs (Again.,there is space to house the industry units to support 5 fuel pumps.) Special thanks to my Kosmos Org Mates for your help & encouragement: Scourgy (for the pump design), Captain Harlock (for voxelmancy lessons), Lunarzkii & fridaywitch Please note: The inside may be very bright if you play with "shadows off" on your graphics settings... if this is the case, you may wish to remove some of the internal light fixtures. Please contact me on my discord to rectify any problems, or if the dispenser needs refilling. I appreciate your feedback (17th Nov 22) - dispenser is placed at Kosmos Showroom. (Alioth) ::pos{0,2,2.9117,105.4578,53.1729}

In the process of moving, blueprints are available to Kosmos Exchange. Get into space quickly and easily with this S core space station. Whether you're new and want to give space a try or a veteran needing to set up a refueling/storage station in orbit, this is for you. Plenty of storage space, room for some industry, clean control center/small hangar and landing on top. Need More landing space? Add on landing pads available. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

Deluxe pads in space on a Large core took a min but its now done the current configuration is red lum glass and black carbon fiber witch is totally epic looking! These 2 colors can be easily swapped when placing to your choice of colors. ( if you see orange steel and lum glass also switch kept trying to find and couldnt) Available at admi temporary store until i finish the official admi store thanks !

Welcome to Digital engeneering Are you someone that like to do LUA, but do not like to build? Or you just need a nice building to work in with your LUA scrips, and then show a new script for the consumer? And even sell the scrips on the main floor. Then is something for you.

Large Hanger Pick your accent color or Luminescent color glass of your choice when you deploy your hanger. Build Comes Standard with Blue Luminescent Glass. The build is sized to accommodate the XL Gates when you are ready to add hanger doors, admire the magnetic gantry cranes. location: ::pos{0,2,5.1035,163.8590,28.5577} POC: Puunene#4859 VR: Puunene Hangers

VR: "VO Factory Sales" This will make 14 Uncommon Mining Units in 24 hours with no indy talents. Easy to set up as everything is labeled!! Check it out in VR or come by HQ!!

XDM tower is a 3 L core tall stack, 258m tall to the roof, and 333m to the very tip. Featured in the outpost museum. Contact: Actimist#4020 Primary designer: MadManWithABlueBox Contributors: Sinjin Factory worker: Visit NovaX showroom here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

ETA Mining Platform Easy Cheep and better then nothing. BP requires 4L containers 1 Hubs 8 Square light s 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}