Dual Universe Creators

Built in the same theme as my #1 selling L Core Factory. 3x's the room and still includes the full L core landing pad on top for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

PYRAMID SHIP PARTS FACTORY: A SHIP BUILDER'S DREAM! MAKES EVERY SHIP ELEMENT EXCEPT ENGINES ENGINE FACTORY COMING SOON ALSO MAKES PROGRAMMING BOARDS AND DATA BANKS HAS EXTRA ASSEMBLY LINES TO ADD YOUR OWN EXTRA PARTS THIS FACTORY IS A BEAST! DONT MISS OUT! OUR SCREEN FACTORY IS A GREAT COMPLIMENT TO THIS FACTORY LIKE ALL OUR FACTORIES; COMES WITH: INGAME AND DISCORD SUPPORT. ALL MACHINES ARE LABELED TO MAKE SCHEMATIC PLACEMENT A BREEZE. ALL CONTAINERS ARE HUBBED TO MAKE ADDING STORAGE CAPACITY A BREEZE TOO! ENJOY! CHECK OUT OUR BIO FOR MORE PYRAMID CO INFO

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

Aside from the fuel they salvage from abandoned ships in the desert, the Dune Dwellers of Haven also harvest resources and produce their own fuel they sell at higher prices to desperate pilots lost in the harsh environment. Their engineering ingenuity has led to some opportunistic capitalism. Build features (2) Basic Mining Units, (2) Refiners, (2) Recyclers, and Chemical M, and other than stocking schematics is fully automated to produce either Nitron or Kergon based on what resources and schematics you provide it. - Platform for dispenser's to sell your fuel - Large blank space on the back to mount a screen to advertise to those who pass your depot. - 2 weeks of raw ore storage, based on the 2 large Mining Unit Designs. - 8,000L of Fuel Storage. - Can produce over 12,000 Liters of nitron per day based on zero skill player with calibrated units pulling both required resources @ 100l per hour. - Can be configured to produce either nitron or kergon, with right tile resources available. (Tokens will not be made available) Featured by: - Landmark Explorer Twitch Channel

Simple Mining Outpost VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

Landfall pads large core landing zone. vr ADMI Build Store or visit ::pos{0,2,-24.6313,16.8071,150.4663}. (Large static core) questions emladra#8532

Will be updating store location for release in weekish atm emladra#8532 is available if you wish to purchase anything. Hoping to be setup with new store on madis in a week possibly 2 depending on resources lol. By popular request i have made a medium core based landing pad ideal for small and xs cores in space fits up to fits 2 small core ships and 4ish xs ships plus depending on the size and box these pads help keep ships apart and in there own area nicely! enjoy! questions ask emladra#8532 discord thanks! vr is (ADMI SALES ships and pads) and cords for base are ::pos{0,1,-53.2259,-47.4236,827.1160}

welcome to the redlined showroom, this showroom is on a large static core you can visit in VR search loaded industries showroom, it has 2 very large showroom floor space 1st and 2nd floor to display your ships etc or can even use for just about anything you like,

McBain Rocket Shop Showroom Floor with Attached Factory Version 1.0 This is a multi-large core build, in total there are 4 large cores, one for each pedestal, one for the factory and one for the hangar. I wanted a hangar attached to my factory, some place I can work and build XS and S ships with good lighting and manufacture tokens all in the same structure. Near future I will have attached landing pads and voxel library storage area. The showroom area is just about the length and width of a large core large enough to showcase or store several small and extra small ships. The factory is five open floors of space with a floating control center. Currently have installed enough machines to make all parts basic thru advanced and have only used a quarter of available space. There are 2 landing pads and an observation deck with elevators to move about quickly. Pedestals available if needed. I am located on Haven just south of Market 7 ::pos{0,27,54.8276,6.0061,12.2331} VR <= Mcbain Rocket Shop => come by for a walk around.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Small Core Basic Containers Factory with a configure and start script Production per day with no talents. 240 Basic Container XS 60 Basic Container S 16 Basic Container M 8 Basic Container L 4 Basic Container XL 2 Basic Container XXL All machines have signs for your convenience All Screens have custom edited scripting

Ikara Industries presents the "Ikara Landing Pad KIT T2 (DRM Free)". The larger version of the Landing Pad KIT T1, with the possibility to integrate containers. The landing pad kit contains - DRM-free - Stairs to the landing pad and to the storage room - 2 different layouts - Recess for two screens - Different layouts available (e.g. door panels) Placement rules: Hold SHIFT when placing the modules. What else you should know: Examples: Building an S Core version 4 x corner modules (63 voxels each) Building an M core version (one side) - 2 x corner modules, 2 stair modules (4 voxels remain, move the panels 2 voxels inward and in each direction). - The M version can hold up to 48 L containers VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

-- Can be viewed in VR: Hadron HQ Alioth --- Introducing the Hadron M Factory The factory shell has been laid out for production of all T1 to T3 pures, products, parts and elements, with plenty of room to install T4 + T5 if needed. Comes with 5 floors and 6 mining units connected to the Jericho mining script. Comes with programming boards preinstalled for augmented reality labels, allowing you to quickly locate industry on any floor and easily read the layout of the factory at a glance. The container hubs are placed on customizable screens so you can neatly organize your storage to your needs. The blueprint uses T1 voxel and luminescent glass exclusively. No industry units or containers are included in the blueprint as the augmented reality makes installation of industry easy. This is so you can choose what to produce when you want or need it. The images alone aren’t enough to showcase all the detail our factory has to offer so please visit us in VR but remember to purchase in person! VR: Hadron HQ To showcase the factory and explain the layout we made an video tour of the factory: https://www.youtube.com/watch?v=BJXpXqc4MaI

Tired of hanging your ship in between the mining units every few days you visit your gold mine? Why not land in style on this luxury M-core landing pad? The top is flat for easy landing but below the real magic happens. On a lower deck, connected with two smaller cores your mining units will be waiting for you. Easily accessible with two ramps from the flight deck or by teleporter from the ground below. Be in absolute control as you calibrate up to 15 mining units without moving a single step, and before you leave have three Large containers at your fingertips to gather you hard earned ores. If you feel like getting your hands dirty you can use the access hatch to drop down to the bonus ores awaiting pickup. A quick elevator up will take you directly to the the flight deck, onwards to the next stop. If you are really in a hurry, all containers and Mining Units are also in reach from one area on the flight deck. The long and stable legs will make placing these cores a breeze, even on hilly ground. Instructions: Place M-core with the middle edge of the mining platform in the exact middle of three tiles. Then place the Left hand S-core, finally the Right hand S-core. If you mix up the order, it will give a nasty one voxel gap. No returns. VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

PYRAMID SCREEN FACTORY: Tired of paying 8k for an XS screen? We were too. So here it is, a screen manufacturing beast. This factory can make a literal ton of screens a day. with 10 assembly lines, this factory is capable of making xs,s,m screens and xs,s,m,l transparent screens. all 10 assembly lines can produce screens of your choosing since they all use the same parts. Just put whatever sized screen schematic you want in any of the assembly lines. they can run one of each type or all of the same type. makes well over 1000 screens per day! XL screen factory coming soon! READ OUR BIO FOR MORE INFO