Dual Universe Creators

A bit of decoration i enjoy building so i thought why not, hope you enjoy :)

The newest addition to Terran empires buildings. This is the mining plattform Terran Excavator (TE), that are adressed to the new players. But yet at the same time to the experianced player, who can use it for higher tiers of ore due to the low cost. There are room for two (2) Mining units. and a capacaty of mining storage of 48 KL (With talents), in 4 small containers on the roof. There are also room for two (2) small parcel containers outside, if needed to use the mission system. And ofcourse there are even a resnode, vr station and vr pod installed. And there are still more room for you to add more storage. The "TE" is coming in five different tiers of MU´s. Basic Uncommon Advanced Rare Exotic The (*) shows witch one are up for a full package sale. We even have the "Territory helper" scrip installed for you to keep track on the cost for your tiles.

Designed by AtmoCorp, a subsidiary of Infinity Corporation. The AtmoCorp T2 Outpost is the next step up from your Starter outpost. Designed to be deployed on any terrain, the T2 Outpost comes with a personal landing pad, two floors of living space, and an outdoor terrace and jacuzzi. With a Container Hub and up to ten large containers pre-installed, with T5 talents included it has a storage capacity of 1920kl. *NEW updated version includes four Basic Mining Units and a rack to hold them. If you don't plan on mining, it can be deleted. The Outpost is built on the top half of a Medium Core. It can be placed with the lower door at ground level, with half the core below the ground to allow for an underground factory. Or the core can be raised up as high as you want, and the lower door and support structure can be copy and pasted to extend it to the ground. Blueprint for sale for 5M 7km south of Market 7 ::pos{0,2,19.3915,97.2582,147.7494} Or in VR search for "AtmoCorp Alioth" DM [IC]Atmosph3rik#6658 on DISCORD with any questions.

Greetings! I will build you a customized factory based off of the layout I use for my own personal factory. My factories are always easy to understand and to expand upon. You're welcome to check it out in VR at "PvP Shop". Pictures are from another build I am currently selling. Reach out to me on discord for more information. TMA#0001

This will make any size and any type of Advanced Atmo Enigine! Setup to make at the same time: x4) L x2) M x2) S x2) XS Just like all my factories, its setup for easy deployment. All indy is labeled for easy start up. Also anything that requires schematics is also labeled per indys. Also has a schematic bank inside for schematic storage and gives the list of all the required schematics for the factory in general! Feel Free to VR over and see it for yourself!! "VO Factory Sales" Message me on any questions you may have on Discord "theOmega28.36#1869"

Welcome to the Dark Forges Scrapyard. VR: DARK FORGES HQ The idea of the Scrapyard is that new players can come and buy elemets that you had on your constructs that's totally destroyed and do not have the quanta to buy/make a new one. Or for the old experienced player that are building new stuff and need to test and experiment with maby a new heat shield etc, so instead of buying/making new stuff, you can save some of your hard earned quanta by paying us a visit. The DAFO think with this idea you bring more to the game, yes you can dismantle an element. But you never know what you will get out of it due to the random component you get. And so to sell the element or even a ship, you can get more out of it. Because face it, you will have more of use of an UNC.atmo L engine, even if you just can repair it 1-2 times more, than one UNC.reinforced frame in your pocket. And yes. We even sell ships at the Scrapyard. We sell them either repaird, with elements that do not have full repairtimes on them, or unrepaird so you can get it cheaper and need to repair it your self. We even buy elements that's broken, the repairtimes are what determines the price of the element/ship that we are looking at to buy. So if you are a scavanger come by and show us what you have. If you are a new or old player looking to save some quanta come on by and check whats in stock. For the best updated prices, head on over to DAFO discord, and check out the Scrapyard chanel. !REMEMBER! The items at the Scrapyard change all the time. So you will need to check out the discord, or visit to see whats in stock!!

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

Small core mining rig with space for up to 10 L mining rigs, containers and refiners. Added hatches for easy access to the surface ore. Mostly all aluminum honeycomb for easy placement.

Control Tower LC-02 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

L core Outpost Pad, the perfect companion for the Outpost Building Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store

Decorative Element drm free VR "Alioth Marina"

Marina Walkway Set Walkways with handles: - straight - 22.5° - 45° Stairs 45° (Z-axis) Industrial Pillar with attachment for the Walkways drm free VR: "Alioth Marina"

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons

PYRAMID T1-3 REFINER+FUEL FACTORY This factory does just what it says. Also makes nitron and X1-4 fuel from byproducts and 2 adjustable transfer units to control how much is made. 8 basic refiners to keep up with most schematic demands. Easy use: Ore in, Waste Out, Product Out format All container hubbed for easy expansion! READ OUR BIO FOR MORE INFO

Mining Outpost with independent fuel production. VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}