Dual Universe Creators

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check you joins before you deploy construct.

DIA is very pleased to introduce the 'Omnifactory', the one stop manufactury for all your element needs. The Omnifactory is able to produce any and every T1-T4 element in the game, to support those who seek a factory setup that is completely and easily adaptable to the trends of the market. Designed for diversity of production over outright capacity, the Omnifactory is the ultimate flexible manufacturing hub - whilst still allowing significant expansion of capacity if desired. It also incorporated DIAs custom written all-in-one LUA script for Industry, Storage and Schematics monitoring, viewable on a single screen and with touch control to switch between functions and scroll screen pages. Customise your screens with the multiple settings available. With designated landing pads on the roof (sized to be able to accommodate a mid-sized elevator from either SVEA or Hadron), significant additional space for more storage in the lower level and a blank canvas on the top level for creating your dream office, apartment, or just even more storage! This is the 'Simple' version, a lower cost entry into the Omnifactory with minimal industry elements required to deploy. This does mean expanding capacity is a little more involved than the up-coming 'Expanded' version, requiring each new industry machine to be linked to each component storage directly. However, the layout configuration and open structure allow this to be accomplished with minimal effort. BP dispenser is set up inside the Omnifactory for a extremely reasonable price of 25Mq ! VR either to the DIA Plaza or directly to DIA Omnifactory to view (but remember - don't buy in VR!)

Mining Outpost with independent fuel production. VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura X8 Pro is our most ambitious rig yet! All the features of the X8 with a new look and larger landing pad. M Core design for extending the landing pad even more if needed. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/TB2ecEd5rs --- Buy Locations --- ::pos{0,2,12.8827,97.8847,-0.0001} VR : Locura Distribution Sales

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

The goal of the Alioth Hyperloop project is to connect various space elevators and towers to the markets via an underground tunnel and train system. Enabling efficient movement of large cargo to and from space and markets. Over 150km of tunnel has already been constructed demonstrating the movement of 1000tons 60km at 500kmhr for 100L of fuel. Now seeking partners, investors, - for - Public Relations and advertising, purchasing or leasing land, and construction of stations and tunnels. Also seeking landowners and tower or elevator operators who would like the convenience and profit of having the Alioth Hyperloop through their territory. VR demonstration track and self driving train - coming soon!

VR: "VO Factory Sales" This will make 14 Uncommon Mining Units in 24 hours with no indy talents. Easy to set up as everything is labeled!! Check it out in VR or come by HQ!!

M Core Landing pad

Introducing the Soltac M-core Mining hub. Ideal for use as central storage and processing facility for your resource flower, or as a standalone base of operations -6 floors of factory space to accommodate small scale refinement and production. -4 external mining pods, each capable of holding 8 L mining units -Subterranean surface ore collection area, with quick access elevator to mining pods -Storage Hangar can support up to 40 L-containers(4 included in BP for ease of deployment) -Dedicated PB for each pod running mining calibration LUA -4 empty PB for any additional LUA needs For a closer look visit "Soltac Mining Hub M" in VR Installation instructions: There are two orange guidelines to help ensure proper placement 1) Flatten terrain 2)Place structure, lower into ground until upper orange guidline is no longer visible. Refer to photos on this ad for proper depth. 3) Excavate central pit, use the outer walkway as a guide. Use smaller shovel size near outer walls to avoid disturbing flattened terrain. 4) Excavate interior rooms, again use smaller shovel size to avoid disturbing flattened terrain 5) Excavate storage hangar and surface ore collection room. There is an orange guideline dictating floor height.

A simple Mine site with a Large container and 4 MU, a screen and a keyboard. Token is a full package that you can deploy where you want. Version exist without Script.