Dual Universe Creators

A full functioning Fuel Factory. Just place raw Ores in the containers and add Shemas. And the factory sells the fuel how you adjust the dispensers. Blueprint Dispenser is inside the Fuel Factory to find ::pos{0,2,21.5954,103.3399,0.5821} For futher Updates or bulk interests contact ingame "Olivilo" or "Samsara" or just write in Discord. Have a nice day.

•The first and only Warp Cell Factory provided on the most compact of cores! (XS) •Blank design, customise its facade to match your environment! •Easy display & management system! •Every Element accessable without space wasting walkways! •*Provides up to 173 Warp Cells per 24 hours! • Use either Pures or Ores! Or a combination of both! • Available as Static or Space version! [UPDATED 2024] The bottom (Catalyst overflow) can be used as the Schematics Container, requiring no additional construction edits. [UPDATED 2023] No overlap - Future update ready! Optimised to hold 3 days production in Ores AND Pures! (over 300kl storage!) "SWARM Flotilla Shop" Surrogate Pad available for preview of working display! * Based on Talent application. Talent application and setup provided upon request for an additional 8,000,000ħ Contents: Basic 3D Printer 2 Basic Chemical Industry 2 Basic Electronics Industry 3 Basic Glass Furnace 6 Basic Recycler 2 Basic Refiner 7 Basic Smelter 2 Canopy Windshield flat M 4 Canopy Windshield flat S 8 Container Hub 7 Container M 2 Container S 11 Container XS 14 Long Light M 2 Manual Switch 2 Programming Board 2 Static Core Unit XS 1 Transfer Unit 1 Transparent Screen M 1 Transparent Screen XS 2 Uncommon 3D Printer 2 Uncommon Checmical Industry 1 Uncommon Electronics Industry 12 Uncommon Glass Furnace 8 Uncommon Refiner 3 Uncommon Smelter 1 Vertical Light S 5 Glavanized Dark Gray Aluminium 402 Schematics Required: (Cost of 35,407,939ħ) Al-Fe Alloy 1 Calcium Reinforced Copper 1 Cu-Ag Alloy 1 Glass 1 Advanced Glass 1 Ag-Li Reinforced Glass 1 Polycarbonate Plastic 1 Polycalcite Plastic 1 Polysulfide Plastic 1 Basic Component 1 Basic Connector 1 Uncommon Connector 1 Basic LED 1 Uncommon LED 1 Basic Antimatter Capsule 1 Uncommon Antimatter Capsule 1 Advanced Antimatter Capsule 2 Basic Quantum Core 1 Uncommon Quantum Core 1 Advanced Quantum Core 2 Advanced Antimatter Core 6 Advanced Quantum Alignment Unit 6 Warp Cell 5 Pure Hydrogen 1 Pure Oxygen 1 Pure Aluminium 1 Pure Carbon 1 Pure Iron 1 Pure Silicon 1 Pure Calcium 1 Pure Copper 1 Pure Sodium 1 Pure Lithium 1 Pure Silver 1 Pure Sulfur 1

** UPDATED PRICE AND VR LOCATION ** Tired of boring mining platforms? This industrial mining outpost raises your mining operations to the next level! Outpost has been designed to house max 5 mining units. It has 1 large container for ores, 1 small container for fuel and 1 refiner to refine ores to M size container if needed. There are 3 different landing platforms for your haulers or personal aircrafts for easy access. You can access fuel, ore and refined ore directly from landing platforms. Naturally you can use elevator access from the ground if you arrive with very large vessel. I will also sell VTOL ships which I use with these platforms. Let me know if you are interested of these also. Volume discount is possible. Please pay attention on details, there are plenty. You can now check out this building via vr: "Odz Mining Outpost MO31" Sale for pb and other Odz stuff can be found from: Location: ::pos{0,2,-0.8187,178.5356,52.3225} Surrogate: Odz ShowRoom (dont buy stuff if surrogate, you have to come visit) Message Odzord#2815 for questions.

A fancy mining rig on S core: 4 mining units, one container L and one VR node.

Built in the same theme as my #1 selling L Core Factory. 3x's the room and still includes the full L core landing pad on top for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

Ikara Industries presents the "Ikara Static Cores Factory". You want to build something, but you don't have the cores. The way to the market is too far for you! Then the "Ikara Static Cores Factory" is just what you need. With this Cell Tower factory you can produce the following cores per day depending on talents. XS up to 847 S up to 384 M up to 34 L up to 16 (tested with level 4 talents on all parts) The tower contains: - 9 L container for pure ore - 2 L containers for core output - Container script (ContainerMonitoring) provided by DU_ASTco - Schematics Monitor provided by GcGoat - S-Core - 1 to 4 per core production - Open and light flooding design - Exterior walls can be added with a little customization using the Ikara Panel Kit S01, sold separately What else you should know: - All signs can be activated with the manual button next to the elevator - To ensure efficient and uninterrupted core production, the factory should run 24 hours without main core schemes. VR: Ikara Industries or Ikara Industries Exchange Where to buy? Ikara Industries Any questions? - Message to @Ikara2184 on Discord

This factory is perfect for starting a mega factory in space from scratch. All T1 setup is already in BP with all products and parts. You can easy start to build everything you need with this setup. 5 floors T1 to T5 and a big space with view on planet with glass panel You only need puts ores and schematics to begin. To visit the factory in VR, contact me on discord : kromen New Alioth Dispenser ::pos{0,2,41.7148,93.8707,74.8080} Visit Factory ::pos{0,0,-13786.3354,203690.3859,55550.9950} VR : Space Factory Beginner Credits for scripts : https://github.com/LocuraDU/DU-Locura-Storage-Info https://github.com/codeinfused/Indy-Hud Credits for Landing pad and wall : https://du-creators.org/makers/Loaded%20Industries

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Simple Mining Outpost VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

*Updated 11/1/22* Now includes Jericho's MU-Monitor Pre-Installed. Simply add MUs and link them to the programming board to see all info on one screen!! New BPs Available at D4nkWorks Showroom These are Long-Term Mining Towers with space for 8 Auto-Miners Designed to fit ANY terrain. The bottom of the tower can be sunken into the land as far as needed and has ladders for access from the ground. Add a surrogate pad and you can easily VR there to calibrate your off-world tiles. The landing pad on top fits S core ships easily and provides EZ access to all 8 miners and the Hub. Landing activates the screen which shows how much ore is currently available. LUA included. Basic Mining Towers have space for your Org name on the side to let people know who's mining in style!

A Fuel and Cell Station Module on M core Small landing pad on top for S core size ship Control tower with 360° view! 4 corridors to connect other modules / space elevator No machine on the blueprint Lower area has several spots for various industry machines, ie: - rounded area can hold up to 20 containers L - 36 refiners / smelters in angled corners - 16 chemicals / glass furnaces in center can be seen on VR: Aerogics Space Station

Another Star Wars Galaxies tribute build dedicated to the countless hours spent waiting for the shuttle. Comes in two versions, dynamic is Tatooine coloring, Static has Imperial (dark). Pairs perfect with the 'Tatooine Trading Post' https://du-creators.org/makers/MrLightWell/ship/SWG%20Tatooine%20Trading%20Post

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

-- Can be viewed in VR: Hadron HQ Alioth --- Introducing the Hadron M Factory The factory shell has been laid out for production of all T1 to T3 pures, products, parts and elements, with plenty of room to install T4 + T5 if needed. Comes with 5 floors and 6 mining units connected to the Jericho mining script. Comes with programming boards preinstalled for augmented reality labels, allowing you to quickly locate industry on any floor and easily read the layout of the factory at a glance. The container hubs are placed on customizable screens so you can neatly organize your storage to your needs. The blueprint uses T1 voxel and luminescent glass exclusively. No industry units or containers are included in the blueprint as the augmented reality makes installation of industry easy. This is so you can choose what to produce when you want or need it. The images alone aren’t enough to showcase all the detail our factory has to offer so please visit us in VR but remember to purchase in person! VR: Hadron HQ To showcase the factory and explain the layout we made an video tour of the factory: https://www.youtube.com/watch?v=BJXpXqc4MaI