Dual Universe Creators

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

In the process of moving, blueprints are available to Kosmos Exchange. Get into space quickly and easily with this S core space station. Whether you're new and want to give space a try or a veteran needing to set up a refueling/storage station in orbit, this is for you. Plenty of storage space, room for some industry, clean control center/small hangar and landing on top. Need More landing space? Add on landing pads available. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura L6 is part of our Lightweight Series. Designed to have a lot fewer elements and also cut down on Honeycomb usage. The L Series is a cheap, lightweight alternative for those needed fast deployment of rigs. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/TB2ecEd5rs --- Buy Locations --- ::pos{0,2,12.8827,97.8847,-0.0001} VR : Locura Distribution Sales --- VR Locations -- View Units: VO Factory Sales -- Other VR Locations -- Locura Exchange Store

In the process of moving, blueprints are available to Kosmos Exchange. Space, it's got all that and the chips! L Core Space Factory shell. Lots of space to make your factory look pretty cool. Getting tired of stacking machines your machines on voxel landing pads? Well stop doing that and factory in style. Tons of hidden storage space. Easily see your machines, lay it out as you like. Center command platform with multiple levels and even decorative hangers (hydroponics look is my set up). Modular set up makes it easy to set up with additional modules including hangars, landing pads, storage modules, elevator modules and more. Come see it in VR at "Czar in Space Showroom" or directly "Czars Space Factory" Dispensers located here ::pos{0,0,-42090.7405,202368.7623,33445.6155} (Please note that VR and in person is an active factory and may have changes made that are not included in the blueprint, please ask if you have any questions)

Hey, you! Yes, you need a small and efficant scrap and fuel factory?? And some good script as well? Well check this one out !

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

ETA Fuel Refiner is great for solo or small groups of players. Makes all Fuels. BP requires 3L containers 4M containers 2 S containers 4 Hubs 3 Basic chemical 2 Basic Recycler 3 Square light s 1 Vertical light s Location: ::pos{0,2,15.0650,96.8392,0.0000}

Ikara Industries presents the "Ikara Static Cores Factory". You want to build something, but you don't have the cores. The way to the market is too far for you! Then the "Ikara Static Cores Factory" is just what you need. With this Cell Tower factory you can produce the following cores per day depending on talents. XS up to 847 S up to 384 M up to 34 L up to 16 (tested with level 4 talents on all parts) The tower contains: - 9 L container for pure ore - 2 L containers for core output - Container script (ContainerMonitoring) provided by DU_ASTco - Schematics Monitor provided by GcGoat - S-Core - 1 to 4 per core production - Open and light flooding design - Exterior walls can be added with a little customization using the Ikara Panel Kit S01, sold separately What else you should know: - All signs can be activated with the manual button next to the elevator - To ensure efficient and uninterrupted core production, the factory should run 24 hours without main core schemes. VR: Ikara Industries or Ikara Industries Exchange Where to buy? Ikara Industries Any questions? - Message to @Ikara2184 on Discord

Will be updating store location for release in weekish atm emladra#8532 is available if you wish to purchase anything. Hoping to be setup with new store on madis in a week possibly 2 depending on resources lol. ( X2 blueprints per purchase!) A small core version of my outpost miner this one is the mini! is a small core design that has room for easy 10 large containers in building the bp only has 2 placed and only 1 basic L autominer placed. Has 6 slots total for the autominers in case you wish to add more later uses just 970m of voxels so easy to construct all aluminum so as to be easy to build and quick to place. the skirt around the edge is rather tall to help place it on uneven terrain and still look right. The 1.5 mil buys you 2 of the mining units bps so just in case you mess up placing one you still have another! thanks for looking and let me know if you have questions about it! emladra#8532 all of my stuff is available on madis at cords- ::pos{0,1,-53.2259,-47.4236,827.1160}

A fancy mining rig on S core: 4 mining units, one container L and one VR node.

A simple Mine site with a Large container and 4 MU, a screen and a keyboard. Token is a full package that you can deploy where you want. Version exist with Script to display MU Statistic on screen.