Dual Universe Creators

Simple Mining Outpost VR => UKD Mining Outpost To buy the plan =>::pos{0,0,-991847.0505,1213526.4660,-2605215.7825}

No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

The IC Citadel Station is an all-purpose single core space station designed with future PVP in mind. Currently we are only selling Blueprints. The blueprint does not include the Warp Beacon or weapons to make it easier to place. Armor: 4 to 12 meters of Nickel, Copper, and Steel armor. Weapons: 8 Gunner seats with a total of 64 hardpoints for weapon placement Storage: 80 Large containers linked to 8 hubs. Industry: Warp Cell Production ~550 warp cells per 24 hours Fuel Production - Kergon X1, X2, and X3 (or change schematics to make whatever you want) Scrap Production - Tier1 - Tier5 Repair: 4 Repair stations, each linked to 5 large containers

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

50% off blueprint price at the moment on dispenser This is a kit for the outpost landing pad as picture this kit is not for beginners its best suited for anyone that knows the fundamental of how to copy and paste and rotate etc in game, there is some over lapping you will also have to do as this pad design is very large but follow the link below and hopefully ive made it clear enough :) link for instructions to follow https://imgur.com/a/ZKcLP2q for VR please search loaded industries showroom

A complimentary addition to the stalwart Logistics Centre, the Mining Outpost enjoys the same style and feel, while giving you the space and comfort needed to enjoy every aspect of your environment. Located on just a Static Core S, this spacious Mining Outpost can be equipped with up to 6 Mining Units and 4 Large Containers. The Outpost also has a casual office floor with VR Pad and Screen to help you quickly see your MUs progress, your storage capacity, and your calibration needs. All in the comfort of an armchair! The construct has been designed with variable land heights in mind, allowing you to sink the foundations down by 2-3 meters, to ensure a sleek and smooth access to the building, and preventing half of it 'floating' away. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Tiered of not having a good spot to park your ship? Want to have a cool platform to display your creations on to sell? Or u just want a cool looking landing platform for your base. This landing platform could be the solution. It is the full size of an L core, whit room below to place at least a big EXL container. -Big enough to park or showcase multiple ships -Stairs for easy access to the platform -Lights for decoration set to blinking in a neat pattern ;) -Highly detailed -Comes whit a re-color kit The Landing Pad is available as BluePrint from a dispenser located near the platform. U can take a look through VR, search for "CCU Voxel Library" Location >Alioth ::pos{0,2,34.8012,72.5860,258.3008} Whit our all in one service we offer u the following options: BP from dispenser 10M All honeycombs needed from dispenser 1.25M All lights if u want those from dispenser 1.4M Take care Noveans and enjoy your day!

This Is a Ore to Fuel Refinery. Makes all Fuel types (One fuel per core) 20 Refiners. 10 Chemical Industry. 14 Expanded Container XXL. Transfer units very on fuel type. Concrete can be replaced with brick for almost same effect.

Looking voor Flexibel Space Storage? You've found it! A space station to place nearby the planet(s) where you collect the Ore from your Mining Units. You can adjust the number of containers you need by yourself. Just add or remove some. A complete fuel industry 'in-house' is present in the station. All containers and fuel are accessible through a Container Hub in the operating room downstairs. Don't worry, you don't have to walk. Elevators bring you up and down. At the bottom of the space station you find 4 small landing pads to accommodate a drop off point for your small planet surface haulers. Your 'L-core-slow-boot-Freighter' can land on top of the station to pick-up the ore. Wanna have a look at the station? Very easy, visit the Space Station Shop in VR: DSGI Allioth Space Storage Wanna buy a blue print? Located at ::pos{0,0,217810.3365,173069.0911,-75076.1042} you can have a real life view and buy the blue prints. !!! Don't buy the Blue print when you are in VR !!!!

Nemesis Harvester Unit. Reverse engineered from ruins uncovered at Obsidian Dragon Headquarters. These Alien Mining Unit are out of this world! Available Harvester X1 set for 1 Miner 250k xs core Harvester X2 set for 2 miners 500k xs core Harvester X4 set for 4 miners 1million s core VR Dracks ShowRoom

At daytime a fairly normal looking tower, but at night it seems to be burning. 5,000,000 quanta for a batch of 8 blueprint copies. Dispenser is in the penthouse underneath the landing pad in the top of the tower. Deploying strategy: 1. deploy the base core 2. deploy the North core, then the East, then the South and then the West core 3. deploy the first floor on the base core 4. deploy the second floor on the first floor 5. the second floor bp copy is DRM free so you can mulitply it to make your Lotus tower higher 6. deploy the top floor on the final second floor core NOTE! Possible problems: while connecting the North, East, South and West cores to the base core you may have to remove glass panels from the base (4 in the center) and then place them back when the core is placed. Check out the tower in VR: The Burning Lotus or visit at location: ::pos{0,2,40.7757,116.8397,0.0000} Have fun!

L core Static Statue of a pretty Lady on the Beach for myDU 260k Marble voxel Full L core size. https://drive.google.com/drive/folders/1yCTheMroiOu6hF4MHFkQ50AvXtcQAoVl?usp=sharing

A nice litle house for you to relax in, or have it as an office away from office. And when you just need to chill, why not cook a nice steak on the grill on the deck, looking out over the sea.

A fully set up fuel and warp cells space module. 72 cells per day without any talent, Kergon, Nitron and Xeron fuels Custom LUA to manage and monitor production Uses two main hub with each 10x containers L: Ore & schematics hub: Input hub for all schematics and ores except pyrite Fuel / Pyrite / Catalyst3: Output hub for fuel and cells. Also used as input for pyrite and catalyst (optional and only used to speed up initialization) To start production, go down to bottom level and run each board (7) until screens go green. Those will set up each machine by selecting recipes and start them with correct maintain values. Special thanks to Captain Ardan and RyanPryde for their voxel kits and Jericho and SilverZero for LUA resources https://github.com/Krengus/DU_ASTco/blob/main/Warp%20%26%20Fuel%20Space%20Module/monitor.json