Dual Universe Creators

UPDATE now available in new release. Just came back to the game, prices may be negotiable contact me in game or on discord Vazrik#6937 *4,000,000 per core, Not including materials. Recommended Galvanized gray aluminium and Luminescent White glass. 4100 honeycomb single voxel thick per core 8200 honeycomb double voxel thick per core 1 L core per core Roughly 200 Luminescent glass per core (may vary but its a good starting guestimate) *Custom built to match your current setup. *Accurate runway measurements and markings(doubled in size to increase visual and utility) *Recommended at least 16 cores in length, 13 cores in length is minimum for this design. Redesigns are necessary for anything smaller, this may be possible to achieve but will be at additional cost. *Can add taxiway's or possibly parking pads if needed, should be no change in price per core depending on the request.

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

A passion project of mine. I will not deploy this on live but I do have a core BP and can distribute it if anyone wants one.

A complimentary addition to the stalwart Logistics Centre, the Mining Outpost enjoys the same style and feel, while giving you the space and comfort needed to enjoy every aspect of your environment. Located on just a Static Core S, this spacious Mining Outpost can be equipped with up to 6 Mining Units and 4 Large Containers. The Outpost also has a casual office floor with VR Pad and Screen to help you quickly see your MUs progress, your storage capacity, and your calibration needs. All in the comfort of an armchair! The construct has been designed with variable land heights in mind, allowing you to sink the foundations down by 2-3 meters, to ensure a sleek and smooth access to the building, and preventing half of it 'floating' away. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

Pyramid mega container factory: Makes every size container xs s m l xl xle makes every size ammo container xs s m l makes two of each size at a time all machines labeled to make schematic placement a breeze schematic lists for all our M core factories can be found on our discord like all our factories comes with in game and discord support

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

Developed by Consolidated Aerospace's infrastructure and Industry Command [I.I.C] this very basic functional factory is designed to make and maintain 8000L if Atmospheric fuel and 8000L of Kergon X2, As long as materials and schematics are fulfilled Required Ore for 8000L of fuels [Estimated] Quartz 2,129.40 Coal 2,059.20 Limestone 3,903.90 totals 8,093

Originally called the 'Fortress Refinitorius' in Beta, this Star Wars Inspired build was quite fun to put together. Suited for many terrains or off-shore, this themed mining platform makes a great personal HQ/factory as well. FEATURES: -Height gives options for what level above surface you'd like the main structure -Imposing and intimidating presence of Sith (Vader's) technology built into the outer façade. -Uniquely designed factory floor -Large open cargo container storage area -Personal living quarters -Throne Room -Conference Room -Balcony -Mining Units (at max height, reduce if surface ore fails to spawn after calibration)

XDM tower is a 3 L core tall stack, 258m tall to the roof, and 333m to the very tip. Featured in the outpost museum. Contact: Actimist#4020 Primary designer: MadManWithABlueBox Contributors: Sinjin Factory worker: Visit NovaX showroom here Sanctuary ::pos{0,26,-63.9876,-154.6958,67.9941}

DPS Hexa Pads - showroom and parking pads with a diamond plate structure. Static XS BPs (DRM) with different patterns, prices vary depending on the complexity (1,000,000 to 2,500,000). IMPERIAL CREST special edition available - for all fans of a well-known scifi franchise! VR: Deeh Store (dispenser + preview -> basement) If you have questions, don't be shy - contact me on Discord!