Dual Universe Creators

L core Modular Space station with a Atlas L core Elevator docking cradle (it can dock other elevators with small modification) , you can easily expand the station with additional modules like the SKY Aegis SPC Dual PAD Visit at VR: SKY Aegis SPC Core Atlas Blueprints available at Alioth: ::pos{0,2,54.7335,109.8047,69.0288}

I proudly Present the Wydee-Design warp cell factory! The warp cell factory can produce 188 warp cells a day without any talents and goes up to 240. Put the ores on the input HUb on the control room at the entry of the factory and everything is being produced for you without any action to do. Everything is well designed inside and organized in a very clear industrial layout. We bring to you lean and visual management. Production behavior: - There is enough container storage to handle a complete week production - The consumption for a week is the following: - Bauxite ~48k - Hematite ~24k - Coal ~63k - Quartz ~91k - Malachite ~18k - Limestone ~35k - Natron ~14k - Pyrite ~12k - Petalite 2.6k - Acanthite ~14k The required schematics to make this run for a WEEK are the following: - Pure product schematics P2: ~1170 - Pure product schematics P3: ~ 500 - Product schematics P1: ~1750 - Product schematics P2: ~350 - Product schematics P3: ~ 210 - Warp cell schematics: ~ 1400 All those numbers are the minimum required (with a buffer included) to make the factory running for a week with: - no talents on speed increase for production - talents lvl 5 pure P1 - talents lvl 3/4 pure P2 - talents lvl 3/4 pure P3 - talents lvl 1/4 on basic products (polycarbonate / polycalcite / polysuflide / alloys (Al-Fe, Cu-Ca-Cu-Ag / Glass (basic, advanced, Ag-Li) If your talents are a bit high than this increase the capacity to make a full run for a week by 10%. Those numbers are mentionned on the screens inside the entry hall where the materials must be inserted in front of each Hubs and maintain rules are also mentionned. To deploy the factory the entrance is in front of you when you deploy it. For BP come to see me on Haven @ ::pos{2,27,27.7968,346.8901,40.2505} or contact me on discord JamesWydee (james78650)#9448 Token are not available for now: depending on the demand I will organize myself for make those available when my talents are going to be updated to LVL 5 (in one month would be available). Come to see the factory by VR @ Wydee_ShowRoom

Modern, spacious and affordable accommodation. The wooden style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony at the back of the 2nd floor provides a great opportunity for spectacular views, while on the ground floor, a dirt bed in front of the large windows provides a natural touch. Built on the middle of the construction grid allows for the owners to expand downwards to provide several basement levels. With plenty of ground space around the condo, several personal speeders can be parked nearby and/or develop more landscaping for natural views and enjoyments. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

Built in the same theme as my #1 selling L Core Factory. 3x's the room and still includes the full L core landing pad on top for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

A mining rig with style - instead of floating mining units everywhere. Space for eight mining units + L container. Mining unit output accessible via elevator to basement area. Mining units not included in BP - place them separately. VR: Deeh Store (dispenser inside the building, 2nd floor next to elevator; turn left when entering 2nd floor via stairs) If you have questions, don't be shy - contact me on Discord!

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

M core Outpost Pad, the perfect companion for the Outpost Building Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store

Better then Dirt No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

Features: The Ta'veren Mega Factory is a fully modular, easily-expandable, space or static factory BP for those of you who want to link up a machine to print an end part. This factory is set to produce all components for tiers one to four. All parts with multiple outputs are designed to cycle contents. If you need more links, simply add a new box and transfer unit, remove the link from the topmost box to the bottom transfer unit, pointing to your new transfer unit, whose output goes to your new box, and link the new box to the bottom transfer unit. If you find it isn't producing as many parts as you need, simply add a new machine on top of it and have the output go to the next box. All industries are named with what they produce, as are the output boxes, so you can easily identify where things link. Color coded borders surround industries with what Tier. Also comes with DU-Locura-Storage-Info for ores and IndyHUD for your industry monitoring.