Dual Universe Creators

Another Star Wars Galaxies tribute build dedicated to the countless hours spent waiting for the shuttle. Comes in two versions, dynamic is Tatooine coloring, Static has Imperial (dark). Pairs perfect with the 'Tatooine Trading Post' https://du-creators.org/makers/MrLightWell/ship/SWG%20Tatooine%20Trading%20Post

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

Introducing "Starlantis Trade Station (SLTS)" <--- Red Ring now complete **All sales are via tokens and all transactions are completed through a barter window** Be one of the first to call Starlantis home. A brand new space station for trade, community, and luxury living. Don't miss the chance to be a pioneer in this exciting new development. The station is located perfectly between Alioth, Haven, and Sanctuary. In the LaGrange point where there is zero gravity. Perfect for parking your large and small ships. Send LeeRoy#4334 a message on discord for more info. "Starlantis Main Entrance" in VR Green Ring: **The first of three rings is sold out (19 people)!** Red Ring: - Designed to allow for easier and cheaper entry into the Starlantis community. Priced at 6 million quanta per S-core. With a limit of 3 Cores per person. To ensure newer and beginner players have access to Starlantis, its community, and all that comes with it. Blue Ring: - The larger middle "Market Ring" is now open for property sales (63 of 157 cores sold 40.0%) M core properties on the Market ring are 20 million quanta per core. When we reach 50% sold the price will increase again. - There are over 20 shops open for business on the Blue Ring along Market Road! Check the Starlantis Discord server for more info on the shops available and how you can get yours listed. Discord server: https://discord.gg/FCQ2WcPqhj 100% of all sales go back into the station's expansion/infrastructure. #Starlantis

VR "VO Factory Sales" This will make all sizes and all models of atmo fuel based Engines including Hover engines!! You can make x4) Large, x2) Medium x2) Smalls and x2) X small engines at the same time All my factories are built to make it easy for the new players or players that dont have much experience in factories and everything is labeled to let you know what to set each unit and each unit or set of units also lets you know what schematics are needed!

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 This is a double landing pad with 2 xs core size garages with plenty to space to add a factory or office space with viewing balcony, perfect for any outpost you can view at the location written on the right of the screen or view in VR search for loaded industries

This will make 55 different elements to help you along your way of ship building. This factory has my most updated labeling screens, scripts and every industry is labeled by the Tier of parts or products it makes.! Adjustor XS- x2880 Adjustor S- x720 Adjustor M- x180 Adjustor L- x45 Aileron XS- x360 Aileron S- x90 Aileron M- x22.5 Atmospheric Airbrake S- x720 Atmospheric Airbrake M- x180 Atmospheric Airbrake L- x45 Atmospheric Fuel Tank XS- x720 Atmospheric Fuel Tank S- x180 Atmospheric Fuel Tank M- x45 Atmospheric Fuel Tank L- x11.25 Atmospheric Radar S- x60 Cockpit Controller- x45 Command Seat Controller- x180 Compact Aileron XS- x720 Compact Aileron S- x180 Compact Aileron M- x45 Databank- 2880x Emergency Controller- x320 Gyroscope- x720 Hovercraft Seat Controller- x180 Landing Gear XS- x960 Landing Gear S- x80 Landing Gear M- x20 Landing Gear L- x5 Programming Board- x720 Remote Controller XS- x320 Retro-Rocket Brake S- x720 Retro-Rocket Brake M- x180 Retro-Rocket Brake L- x45 Rocket Fuel Tank XS- x20 Rocket Fuel Tank S- x5 Rocket Fuel Tank M- x1.25 Rocket Fuel Tank L- x0.31 Space Fuel Tank XS- x720 Space Fuel Tank S- x180 Space Fuel Tank M- x45 Space Fuel Tank L- x11.25 Space Radar S- x60 Stabilizer XS- x720 Stabilizer S- x180 Stabilizer M- x45 Stabilizer L- x11.25 Vertical Wing- x1152 Warp Drive L- x1 Wing XS- x720 Wing S- x180 Wing M- x45 Wing Variant M- x45 Wingtip S- x1152 Wingtip M- x1152 Wingtip L- x288 VR: "VO Factory Sales" Discord Name: theOmega28.36#1869 Discord Channel: VO Industries I stand behind all my factories. If you have any issues please reach out to me and i will be more than happy to help resolve any questions or issues you may have. If i do any updates to any factory you already have, i will upodate it at no cost to you. I have a discord for VO Industries that you can join to help keep up with updates and future factories along with support tickets and other factory related topics!

Introducing the Consolidated Fuel Refinery MKI This small core refinery is designed to produce Nitron and Kergon- X2 fuel. Featuring a small waiting area with 2 dispensers for fuel or other goods, 4 Large basic miners, An industrial themed interior and a roof top seating area. There is also another space in the building for storage or more dispenser, or even toilets if you fancy. *Elevator no installed in BP

The goal of the Alioth Hyperloop project is to connect various space elevators and towers to the markets via an underground tunnel and train system. Enabling efficient movement of large cargo to and from space and markets. Over 150km of tunnel has already been constructed demonstrating the movement of 1000tons 60km at 500kmhr for 100L of fuel. Now seeking partners, investors, - for - Public Relations and advertising, purchasing or leasing land, and construction of stations and tunnels. Also seeking landowners and tower or elevator operators who would like the convenience and profit of having the Alioth Hyperloop through their territory. VR demonstration track and self driving train - coming soon!

Designed by AtmoCorp, a subsidiary of Infinity Corporation. The AtmoCorp T2 Outpost is the next step up from your Starter outpost. Designed to be deployed on any terrain, the T2 Outpost comes with a personal landing pad, two floors of living space, and an outdoor terrace and jacuzzi. With a Container Hub and up to ten large containers pre-installed, with T5 talents included it has a storage capacity of 1920kl. *NEW updated version includes four Basic Mining Units and a rack to hold them. If you don't plan on mining, it can be deleted. The Outpost is built on the top half of a Medium Core. It can be placed with the lower door at ground level, with half the core below the ground to allow for an underground factory. Or the core can be raised up as high as you want, and the lower door and support structure can be copy and pasted to extend it to the ground. Blueprint for sale for 5M 7km south of Market 7 ::pos{0,2,19.3915,97.2582,147.7494} Or in VR search for "AtmoCorp Alioth" DM [IC]Atmosph3rik#6658 on DISCORD with any questions.

This is my entry for the 'Build Your Legacy' competition and while I think it fits the requirements I do not like it as much as the speeder I submitted. I think it is mainly due to the colours as I have not built with Tier 1 ore (Except concrete) for a long time so I only really had the colours provided to work with. It does feature a pad for parking your speeder underneath the structure. My favourite aspect of this design was the stands I setup for the mining units.