Dual Universe Creators

ANDARTA_V3 ship with all parts in basic S core S shield S radar 4 missile S 3 L space engine NO HUD NO DRM CCS : 8.64M | 35% all resist in full T1 you can increase your ccs by replacing the mesh with a higher quality mesh > T1 : carbon, silicium, iron, aluminium T1.5 : plastic, steel, silumin, duralmine etc... U can visit me in VR "baxtonAeronotics" Renember, dont buy in VR !!! BP dispencer available at this position : - ::pos{0,27,13.7133,23.1457,54.8997} Have fun

Ever want to ride on Santa's Sleigh? Now's your chance! On Dasher and Dancer, on Prancer and Vixen! On Comet and Cupid! On Donner and Blitzen! Don't forget Rudolph! He's leading with his red nose! Take a Holiday Flight today! Merry Christmas!

Easy to handle and fast, perfectly balanced. Simple and convenient to build. This ship allows you to scan the entire safe zone with a very small investment. Great for DSAT or as a small hauler, with a container M provides enough space for a good load. Talent level at least 3 recommended BP: Dispenser location in Alioth. :: pos {0,2,13.8418,104.1626,23.9106} TOKEN including the 3 scanners. PM me

Phantom is my first M core art build. It's built out of carbon fiber to keep the weight down, but also to give it this cool chromish look. I haven't even made a proper video on it, but here's my first version of it and first test flight: https://www.youtube.com/watch?v=A9YNFEVcSoM (on this video it's not complete, it's missing warp and some wings). INTERIOR: cool looking interior, with bridge/cockpit, 2x crew quarters and cargo area. cockpit has switches and lights that will let you turn stuff on/off and lights will indicate what's on/off. fuel tanks are also nicely places behind hatches, which are opened by a switch and lights turn on, in other words, i put some time into designing the interior. one crew quarter is pretty much empty, so you can make your own design in there. FORWARD ENGINES: 12x L basic atmospheric engines and 4x L basic space engines NOTE - cargo capacity and lift are not absolute and are easily modifyable! I made it as art-build, but it performs quite well as hauler. currently it only had 4x L containers, but you can easily easily put more containers. I think you can quite easily fit +6 to 8 L containers into it, so total of 10-12 i'd say. there's also some room for more wings if needed, only problem with heavy loads might be hovers. I have tested about 2000t and it had absolutely no problem lifting it with low level talents (level 2-3). if you have "heavy foot", you might want to put L space fuel tank on it, because i have M only and it runs out quite fast if you're hammering it. with full tank, it's enough to make a round trip from plant to planet, so in other words, it can escape atmosphere twice, but with cargo it might be an issue, so have some extra fuel or get L space fuel tank. You have to land anyway, so i see no harm in refuelling in meanwhile. I'm not very happy with some voxel work outside as there's a bug where voxels look fine in build mode, but when i exit build mode, they twist into something else. it's hard to fix those as in build mode it looks fine, so i don't know what to adjust, but otherwise it's fine.

A modular Cargo Cassette, providing up to 648,000 litres of space. Each cassette comes with an Inventory interface for easy viewing of contents, their total volume and quantity, along with the constructs weight. Every Cassette is made on an XS Core and lightweight plastic, allowing you do to dock any of them to any ship suitable and available. Additionally, it is possible to place up to 2 Cassette M or 16 Cassette S in the space of 1 Cassette L, providing more dynamic storage and transportation options. Dimensions: Width - 40vx Length - 60vx Height - 20vx Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

Inspired by The Raft from Star Citizen. The Raft has 3 large containers and a stunning full interior. To do those market trips in style. The Raft has: - Bridge (Pilot and Co-pilot) - Captain quarters with bathroom - Boardroom - 4 Bed bunks - 1 Shared bathroom - Kitchen and dinning area VR: SCHG Ship Sales - Madis ::pos{0,1,81.7469,5.7865,545.1833}

Small XS ship with S container, can carry 50T load easily. Do your shopping in style 😊 BP 500K here: ::pos{0,2,31.8510,113.7498,0.0000} Petit ship XS avec un conteneur S, peut porter facilement 50T de charge. Fait vos petites courses avec style 😊 BP 500K ici : ::pos{0,2,31.8510,113.7498,0.0000}

2 L container cargo ship

Inspired by the Starwars Jedi Starfighter. The Jedi Starfighter is pocketable. VR: SCHG Ship Sales - Madis ::pos{0,1,81.7469,5.7865,545.1833}

XS POCKET SHIP with a Medium atmo tank POCKETABLE SHIP with huge range and excellent maneuverability VR: SKYEXPLORER SHIP SHOP Blueprint dispenser at ::pos{0,2,34.3635,107.2191,203.2601} All stats with Zero talents

Spaceship, Speeder and Double-Seater - - - --------------------------------------------------- For reference, please also see "Anisoptera v1" to "Anisoptera v3" on this website (the previous versions). The Anisoptera v4 X2 (internal code name: "Gliese") is the latest version of this famous dragonfly-alike designer speedboat and completes the evolution towards a fully space-capable speedboat. The original designs called for a fast boat that could fit many different types of ship hangars, thus the resulting concept was that of a very slender ship hull. That in return resulted in a low drag amount and therefore high possible speeds if powered adequatly. Overheating starts at 1,800 km/h, first damage at around 2,300 km/h inside atmosphere. The version 4 has the following improvements over V3: - even higher speed (same atmospheric 2,300 km/h as before but now towards 30,000 km/h in space) - more brake power And the best is: from the outside there is almost no difference! NOTICE All versions avalable: - NEW! Anisoptera v3 (space-capable superspeeder one-seater) - NEW! Anisoptera v3 (space-capable superspeeder two-seater) - Anisoptera v3 (suborbital superspeeder one-seater) - Anisoptera v3 (suborbital superspeeder two-seater) - Anisoptera v2 (atmospheric speeder one-seater, THIS version) - Anisoptera v1 (atmospheric speeder one-seater, Poor Man's edition) AVAILABLLE NOW FOR A LIMITED TIME ON "Tropico" (VR), ALIOTH

Rescue Zodiac built by TonyLeStarK, now available for purchase! The entire Zodiac is made with the VPT tool, no basic shapes used. *Works only on water* Want one? Want to visit the display model? VR: RMS Titanic Location #1 (RMS Titanic) ::pos{0,2,40.5224,57.7193,0.9341} Location #2 (Wicked Wonderland) ::pos{0,2,45.6817,74.9654,4.3554}

A highly functional mission runner and heavy hauler designed for auto-pilot mission running. It doesn't look like much but it is capable of lifting 7KT gross cargo weight off Alioth with level 5 handling and level 4 piloting skills. Features: -ArchHUD 0.015 so GeForce Now users can use the HUD right away. -An Advanced Shield Generator L for running missions through PVP space. -4x Basic Space Engine XLs - easily upgradeable with the placement coordinates below. -20x Uncommon Military Atmospheric Engine Ls. -10 Large Containers. -Over 2Gs of space thrust while fully-laden with mission packages. -The ability to land vertically on all planets while fully-laden with mission packages. The approximate build price on December 3, 2022 is: 27M Space Engine XL placement coordinates: Top Left: -17, -27, 14.5 Top Right: 17, -27, 14.5 Bottom Left: -17, -27, -14.5 Bottom Right: 17, -27, -14.5 Note: Shift+Scroll wheel will allow you to adjust the camera zoom. Can be viewed through VR at the Nunki Ship Showroom.

A light ship for transport goods to and from marked. 3 L Atmo Engines 2 L Space Engines 1 L Cargo Container 2 M Space Fuel 1 M Atmo Fuel Space for adding Warpdrive / Shield Blueprint dispenser at Alioth ::pos{0,2,28.7091,111.9380,-0.0000}

I have quited the game, for any info contact orri. or RyanPryde in discord The arcadia albator warforged multicore ship (Blue print release Estimated) Video : https://www.youtube.com/watch?v=I2VsljnVxbw&t=82s In the 2013 CGI film adaptation, Arcadia is given its most drastic redesign yet. While superficially from a distance it still closely resembles the classic shape of the older designs, the retro World War II battleship-inspired characteristics of Leiji Matsumoto have been abandoned almost altogether for something quite dominating and alien. It is far larger at double the size and mass, and much more ridiculously defined and grossly detailed, to the point that the skull-and-crossbones feature a lower jaw, hollow eye sockets, and a spinal vertebrae-like structure extending from it across the middle of the forecastle. Ominous red lighting emits from the underside layers and various holes and vents of the ship, including the eye sockets. Instead of three turrets, there are three rings encircling the hull of the vessel mounted with four cannon turrets each, capable of moving along the circumference to cover up any blind spots. There are three "masts", the last of which a Jolly Roger flag is usually flown from. In the place of wings, there are four bony harpoon-like protrusions that point forwards, with the top two being longer and skinnier than the bottom two. More protrusions jut out towards the stern of the ship, with two culminating in hook shapes, and one resembling a short bony tail. The middle of the ship is seemingly built around a large spherical mass. The vessel has an overall rocky or bony texture across the whole body, with some parts looking as if they were warped or fused onto the ship. Perhaps most interestingly of all, this depiction manages to still retain a semblance of the original bridge and superstructure, even the shape of the wood-like galleon stern remains intact. It is now powered with dark matter engines that are hexagonal in shape. The ship is in work in progress