Dual Universe Creators

K.I.T.T. from Knight Rider, however mine is called Knight Industries Ten Thousand, as it can fly into space! Check it out @youtube: https://www.youtube.com/watch?v=tMiXeJ96emc I've always liked Knight Rider, so that was my inspiration for this build, it's built after an actual 3D model by using 3D hologram. This ship only serves as personal transport, originally i had xs container on it, but i took it off. You can remove space engines and space fuel tank and turn it into a pocket-rocket. I currently have rare military engines on it and it really flies! It can go from 0 to 500 in like 3 seconds, it's very agile and easy to control, it can do barrel rolls and death loops. if you're not bothered by the looks, you can very easily add more wings and/or engines on it, very easy to modify to fit your needs. you can easily replace hovers with vertical booster if you wanna use it only in space ..etc.

The Stellarwing is an exercise in minimalism. Available in both cargo and warp versions. Its fitted with a few chairs if you care to take your alts or friends along with you. For those using it as an alt carrier, you can easily fit a res node inside the ship covering the upper hatch. She also has minimal cross-section, so even when using rare militaries, has good fuel consumption. We won't lie the warp version is far from the fastest, but by using only medium engines, it has exceptional fuel consumption. She warps from Alioth to Teoma on 14 warp cells fully fueled, which isn't bad for something a little more brash than a warp drive with wings and a few engines. She also has storage to store a warp drive in the cargo and will make it to space with decent skills and a patient pilot in this configuration (3's should do it). In cargo mode, she has 4 xs containers and 2 s. More than enough for whipping around to the market and small pick-ups. She'll easily carry 100t, with 200 not being out of the question with a patient pilot. She'll cruise at over 2000 with altitude without popping components. Blueprints are available for 1,000,000 quanta and we can make tokens available on request. But it will take us a short while to cook the engines up for you. Pop along to Stellar Forge | VR: "Stellar Forge" and see her for yourself. Join our discord for updates and news from the org. https://discord.gg/X8tDggSRMY Note: If you fly with ARCH or any other autopiloting type HUD, due to how optimised this ship is, it may show as overweight when loaded with some cargo in it. It may also overshoot its braking point. The ship has been well balanced and has no nasty handling characteristics if you are flying manually, it is also capable of carrying weight. However, It is purely designed as a warp shuttle, it is not really made to carry anything more than you and full tanks. If you want to carry anything mroe significant than 10-20t or blueprints, the Rouen may be a better choice. (or the new WIP shuttle which will be released soon, which sits between the Rouen and the StellarWing).

Hi this the [1L]Ten small hybrid hauler xs ! perfect for beginner Engine > full basique U can lift for at 1G 300t to 500t depend you can lift between 300 and 500 tons depending on your skills if u need his dispencer is here : ::pos{0,27,13.7018,23.2471,59.8493} and vr : "baxton aeronotics" dont forget, dont buy in VR :) !!! have fun !

sBlindé_v2 [ANDARTA V2] ship with all parts in basic S core S shield S radar 4 missile S 4 L space engine HUD : ATHENA 1.0 CCS : 8.64M | 35% all resist in full T1 you can increase your ccs by replacing the mesh with a higher quality mesh > T1 : carbon, silicium, iron, aluminium T1.5 : plastic, steel, silumin, duralmine etc... U can visit me in VR "baxtonAeronotics" Renember, dont buy in VR !!! BP dispencer available at this position : - ::pos{0,27,13.7133,23.1457,54.8997} Have fun

Super fast personal transport elevator with rare freight engines for only ~2L fuel consumption per roundtrip. Already over 100 deployed in the system ! Hadron’s signature voxel work and Jeronimo’s feature packed JSE++ have come together to produce our series of tower free space elevators! Our elevators are tuned to provide lightning fast transportation of goods and personnel, to and from space, with minimal fuel consumption and effort. What sets our products apart from the competition is our elevators use a number of atmospheric and space brakes to slow the craft rather than using engines to do so which burn a lot of fuel. By using brakes, a huge amount of cargo can be brought safely down from space. Damage Report AR (augmented reality) for monitoring fuel and overall weight at a glance JSE++ elevator script for maximum control and performance tuning The JSE++ flight script provided by Jeronimo, offers a huge number of parameters for you to tune the elevator to your liking. Some notable features include: - Default++ windows system, draggable windows, interactable buttons - Up to 9 easily adjustable and renamable floors - Customisable orientations vectors for gravity elevators or shaft elevators - Various customizable engines settings, approach and travel speeds for empty or full cargo - Automatic engines power on/off - ECO Mode (uses gravity to accelerate the elevator back down to the planet) - Dynamic Augmented Reality floor selection interface - Hot keys for quick action (ALT + 1...9) - Admin list for allowing only certain people to adjust parameters - Blacklist to exclude certain people from using the elevator - Interface available in 3 languages: eng / fr / ger - Auto shutoff on endpoints with adjustable telemeter offsets. -100% autonomous docking in space with emitter / receiver. -All Elevators are desinged to fit in gates eg. XS ExpL or XL but will also work with sliding doors. To ensure optimal customer experience, we have developed a concept to provide you with an "all-in-one package". Our mission is a happy customer On your first ever Elevator you can only get an token or you provide the needed parts. Full Service Installation with one of us is required to make sure everything works 100% perfectly, and you are fully satisfied with our product. After your first setup you can buy blueprints and use our install guide (VR: Hadron Atlas Guide) or ask us questions any time. The on site install help for all elevators includes: Planning and setting up the ground cradle. Full explanation of all settings in discord with screenshare. After the ground setup we will fly together up and place your space station core. Placement and aligning Space core dock. Integration of the cradle in other space station BP´s. Quick demo of the elevator (XS MAX): https://www.youtube.com/watch?v=XIesj0XYORU Call us on discord for an personal tour: ryanpryde / midacre / mcxerxes Visit us in VR: Hadron HQ Alioth

Super nimble, good looking ship for Atmospheric flight. Fly in style of the Dune universe when you do your business around the planet. It's made of very cheap parts based on an Dynamic Core XS

Suborbital Superspeeder Double-Seater - - - 4,000+ km/h at edge of atmosphere --------------------------------------------------- For reference, please also see "Anisoptera v1" and "Anisoptera v2" on this website (the previous versions). The Anisoptera v3 X2 (internal code name: "Blitz Dual") is the latest version of this famous dragonfly-alike designer speedboat, ihere as the two-seater version. The original designs called for a fast boat that could fit many different types of ship hangars, thus the resulting concept was that of a very slender ship hull. That in return resulted in a low drag amount and therefore high possible speeds if powered adequatly. Overheating starts at 1,800 km/h, first damage at around 2,300 km/h. At the edge of the atmosphere, in suborbit, no damage and overheating, and speeds in excess of 4,000 km/h. The version 3 has the following improvements over V2: - even higher speed (same atmospheric 2,300 km/h as before but now beyond 5,000 km/h suborbit) - slightly increased wing lift capacity - more brake power - passenger seat And the best is: from the outside there is almost no difference! NOTICE All versions avalable: - NEW! Anisoptera v3 (suborbital superspeeder one-seater) - NEW! Anisoptera v3 (suborbital superspeeder two-seater) - Anisoptera v2 (atmospheric speeder one-seater, THIS version) - Anisoptera v1 (atmospheric speeder one-seater, Poor Man's edition) AVAILABLLE NOW FOR A LIMITED TIME ON "Tropico" (VR), ALIOTH

I have quited the game, for any info contact orri. or RyanPryde in discord The arcadia albator warforged multicore ship (Blue print release Estimated) Video : https://www.youtube.com/watch?v=I2VsljnVxbw&t=82s In the 2013 CGI film adaptation, Arcadia is given its most drastic redesign yet. While superficially from a distance it still closely resembles the classic shape of the older designs, the retro World War II battleship-inspired characteristics of Leiji Matsumoto have been abandoned almost altogether for something quite dominating and alien. It is far larger at double the size and mass, and much more ridiculously defined and grossly detailed, to the point that the skull-and-crossbones feature a lower jaw, hollow eye sockets, and a spinal vertebrae-like structure extending from it across the middle of the forecastle. Ominous red lighting emits from the underside layers and various holes and vents of the ship, including the eye sockets. Instead of three turrets, there are three rings encircling the hull of the vessel mounted with four cannon turrets each, capable of moving along the circumference to cover up any blind spots. There are three "masts", the last of which a Jolly Roger flag is usually flown from. In the place of wings, there are four bony harpoon-like protrusions that point forwards, with the top two being longer and skinnier than the bottom two. More protrusions jut out towards the stern of the ship, with two culminating in hook shapes, and one resembling a short bony tail. The middle of the ship is seemingly built around a large spherical mass. The vessel has an overall rocky or bony texture across the whole body, with some parts looking as if they were warped or fused onto the ship. Perhaps most interestingly of all, this depiction manages to still retain a semblance of the original bridge and superstructure, even the shape of the wood-like galleon stern remains intact. It is now powered with dark matter engines that are hexagonal in shape. The ship is in work in progress

**Updated** All Boosts have been maxed Out producing 25.7 g The Nuclear Chicken is a (DRM FREE) RocketBike designed for Fun. It incorporates Seawing's patented dual heat shields which allows it to survive extreme speeds over 6000 km/h. It also works great as a hovercraft racer, and being Ultra Light at 8.19 tons, drifting with it can be a lot of fun. It is extremely maneuverable and makes a great ship to run after mining units with. The Nuclear Chicken is based on on the UEF nanobike. To build using the Blueprint, buy the UEF Bike first and then source the remaining 9 items from the market. Both the blueprint and the token are available at the dispensers on my base at: ::pos{0,2,53.8856,90.0878,37.6314} RDMS has been set so the craft can be deployed at the tile. Some Flight tips: 1. The bike has a Gyro because the space engine is placed at 45 degrees. At 10k meters activate the Gyro to fly correctly with AutoPilot. 2. Lastly, DO NOT REPAIR damaged Relay XS elements. It is expected for them to become damaged when you break in the heat shield.

The IWAC Tsunami is a a lesson in pragmatic design, with every aggressive edge and element placed done so with an eye towards performance. The result, a pocket monster - an aggressive S core that will get you where you're going fast. It will happily haul a nearly a KT into orbit, or burn itself to pieces in a straight line. Basically its a perfectly balanced racing hauler with attitude. Treat it nice and it may not rip your face off. Tokens prices available on request (with some lead time). Live life, fly Wicked - visit Wicked Wonderland Ship Shop today ::pos{0,2,34.7992,86.1957,231.5103} Live life, fly Wicked - visit Wicked Wonderland Ship Shop Discord today https://discord.gg/wGzhV45KWz

Tiny disposable asteroid hopper matching the design philosophy of The Ray (https://du-creators.org/makers/mark-o-solo/ship/The%20Ray%20Executive%20Edition). The hopper comes with all necessary equipment for asteroid mining sessions, all while remaining minimalistic to the core to allow quick reassembly when unplanned spontaneous disassembly might occur. In particular, it is equipped with a Archhud autopilot, VR pod, radar and good lighting. A large space engine allows for rapid recovery of the mined goods. Where to find: The Hopper is currently exposed alongside The Ray at the Dome, with AngryDad's kind permissions ::pos{0,2,35.9876,105.1131,0.0000} VR: The Ray Executive Serenity Shipyards also offers customization and individualized Editions, please contact CEO mark-o-solo (Discord: god#0275) for development. Yours truly -mark-o-solo, CEO Serenity Shipyards

I have quited the game, for any info contact orri. or RyanPryde in discord --DU creators website is very bad i got hacked do not trust it-- All likes removed from my ships The Gear Rex personal utility VTOL (vertical takeoff or landing) is a must have for any fleet. Small enough to park practically anywhere and with enough control to take you to your destination with precision and ease; the utility of this vehicle cannot be understated. The vehicle can be flown with a custom LUA HUD or using the default auto config and works great for rescuing ships, reaching hard to reach places or delivering you to the market from a larger AGG ship parked above. The voxel work was all handcrafted using the Vertex Precision Tool (VPT) and all elements are affordable due to their size and grade. For any information or Token request contact me on dicord Captain Harlock#8115 or FinalX#2672 LVL 5 on all elements VR: Kosmos Public DSAT Showroom Dispensers : Alioth Exchange Green hall 7 Alioth Kosmos HQ Location ::pos{0,2,2.8943,105.4507,53.0078}

A modular Cargo Cassette, providing up to 9,000 litres of space. Each cassette comes with an Inventory interface for easy viewing of contents, their total volume and quantity, along with the constructs weight. Every Cassette is made on an XS Core and lightweight plastic, allowing you do to dock any of them to any ship suitable and available. Additionally, it is possible to place up to 8 Cassette XS in the space of 1 Cassette S, providing more dynamic storage and transportation options. Dimensions: Width - 15vx Length - 10vx Height -5vx Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

Tie Fighter Light Exploration Warp Drive Small Cargo Planet jumper Token not available Blue print only location ::pos{0,2,18.9800,96.1073,212.8104} or visit in VR The Ship Shop TWB

This is a FLYING GUILD HALL. For any fans of SWG, player housing stood out even to this day as an amazing system from the technical programming side to the completely unique way players utilized it- so much fun for bringing people together or even being the envy of the server for having the largest, shiniest, most visited, etc. That spirit is very much alive in DU and one of the reasons I felt inspired to bring back a taste of the 'feel-good' content from gaming over the years. This high-accuracy recreation has enhanced use you wish you had 20 years ago, namely, it FLIES now! Create your most fancy halls once again and bring them along where-ever your adventures take you! FEATURES: -Large open spaces perfect for countless uses, make a vendor mall, make a lounge bar, make anything! -5 Large Sub-level rooms: great for storage, bedrooms, trophy-sets, art galleries, etc -2 Side rooms with extra storage room/ staircases to top pad -Top landing pad fits full S-core ships -Full art gallery of hand-picked screenshots featured by Sony Online Entertainment. -2 Moisture Vaporators to help you stay moist! -Plenty of power and lift if you want to use for common casual hauling. (6 Large Atmo Engines, 4 Large Space) **VERSIONS- This isn't the true TATOOINE guild hall, this is just a tribute. During beta I made the Generic and Naboo versions, then a Sith, then this one. It was easier to just add the mounds on top for my take on this style using the traditional hall. Most fans will remember in SWG there were 4 models for Generic, Naboo, Corellia, and Tatooine but Tatooine had a uniquely different model from the rest. Perhaps I'll get around to making that one too, one day... *Reminder: as with all flying buildings by LSA, these models can be 'buried' or snuggly fit into other static builds and effectively used nearly the same. There are no current plans to copy guild halls to static cores.