Dual Universe Creators

Better then Dirt No elements needed You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Will be updating store location for release in weekish atm emladra#8532 is available if you wish to purchase anything. Hoping to be setup with new store on madis in a week possibly 2 depending on resources lol. By popular request i have made a medium core based landing pad ideal for small and xs cores in space fits up to fits 2 small core ships and 4ish xs ships plus depending on the size and box these pads help keep ships apart and in there own area nicely! enjoy! questions ask emladra#8532 discord thanks! vr is (ADMI SALES ships and pads) and cords for base are ::pos{0,1,-53.2259,-47.4236,827.1160}

Introducing the Soltac M-core Mining hub. Ideal for use as central storage and processing facility for your resource flower, or as a standalone base of operations -6 floors of factory space to accommodate small scale refinement and production. -4 external mining pods, each capable of holding 8 L mining units -Subterranean surface ore collection area, with quick access elevator to mining pods -Storage Hangar can support up to 40 L-containers(4 included in BP for ease of deployment) -Dedicated PB for each pod running mining calibration LUA -4 empty PB for any additional LUA needs For a closer look visit "Soltac Mining Hub M" in VR Installation instructions: There are two orange guidelines to help ensure proper placement 1) Flatten terrain 2)Place structure, lower into ground until upper orange guidline is no longer visible. Refer to photos on this ad for proper depth. 3) Excavate central pit, use the outer walkway as a guide. Use smaller shovel size near outer walls to avoid disturbing flattened terrain. 4) Excavate interior rooms, again use smaller shovel size to avoid disturbing flattened terrain 5) Excavate storage hangar and surface ore collection room. There is an orange guideline dictating floor height.

50% off blueprint price at the moment on dispenser loaded industries presents large core space landing pad, this is the same as my ground version with basement thanks to daddyshark for doing the conversion for me, you can easily add these to any other building you have in space just square up the blueprint and do 2 clicks down when level on the core your stood on or just place in space any where you like, dispensor can be found at my base

This is an easy to build mining station designed with cheap elements. This station have 6 large extractors linked with a large container to receive minerals. This station is build on a S static core for modular purpose. The blueprint can be find inside a dispenser on Alioth : ::pos{0,2,46.6090,96.4753,134.4049} The dispenser is on the rooftop.

We are also located at the Alioth Exchange in the Red Isle I am at it again with more factories!! Are you a Space Only Person and would like to just make your own Space Cores without the cost of having to buy a core factory that makes them all???? I got you!! This Space Core Factory produces all size cores This is what it will produce every 24 hours with no industry talents XS Space Cores---720 S Space Cores-----60 M Space Cores----4 L Space Cores----0.7 For any questions, please reach out to me on Discord We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

2B Designs Duo Hangar 2x L Core Size Hangar - Plenty of Workspace (Can fit L core ship) - Plenty of light - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - 2xL Core Size Landing pad - Elevator / Hole Access to the floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) Make sure to over lap the middle of the cores to fit together VR: "2B Hangars Display" Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

Modern, spacious and affordable accommodation. The wooden style condo is designed to provide plenty of open plan areas for showing off your decorations and trophies, while still being able to segregate areas for certain tasks. The balcony at the back of the 2nd floor provides a great opportunity for spectacular views, while on the ground floor, a dirt bed in front of the large windows provides a natural touch. Built on the middle of the construction grid allows for the owners to expand downwards to provide several basement levels. With plenty of ground space around the condo, several personal speeders can be parked nearby and/or develop more landscaping for natural views and enjoyments. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

Step up your mining ops with a Thumper Mining Laser from Dumboiz United. This S-Core mining unit is here to do some work! 4 mining units converge at a singular point, making gathering your surface harvest easier than ever! One large container is neatly stored up top, with a VR platform and container hub placed conveniently at the ground level. The core itself sits on the floor of the build box, making placement easy, and cleanup a breeze. Quit wasting time at your mining units! Calibrate 3/4 of your mining units from one spot, harvest all of the surface ore from one spot, and find your mining station from from a kilometer away with the scale and light emitted from this laser! Everyone has a platform, now. Everyone's going to have a Thumper. (Currently equipped with Basic Mining Units -- if you want to upgrade your laser, message isyron#4015, bring 4 upgraded units, and he'll do the swap and give you the BP!)