Dual Universe Creators

During beta while watching 'Spaceballs' I speed-built a low cost M-core tribute ship - this was that ship. A mini-bachelor pad/arcade this very handy craft is well-built for efficient UTILITY as well as FUN. HAULER- Main cargo is two basic L containers. Extra cargo is 1 S container (scraps/spare parts), 1 S container (warp cells). 8 L Atmo Engines, 4 L Space Engines, 1 XL Space Engine, basic equipment and parts all around •Meets requirements for large Aphelia missions SCANNER - optimal wide mounting points for rapid deployment of territory scanners. TOW/RESCUE- Comes with upper docking pad (Fits S-Core) or several XS-Cores. *Warp ready: warp drive is not on BP but location for drive is vacant and coordinates can be found on a screen near placement location

*** Honeycombs Info *** It is recommended to reduce usage of aluminium as it became heavier. Carbon fiber is the lightest, with wood & brick next. Here is a suggestion on what to change: black pattern plastic => matte black carbon fiber galvanized black aluminium => matte black brick gray aluminium pattern => glossy gray carbon fiber polished dark gray aluminium => glossy dark gray carbon fiber polished gray aluminium => this is the main honeycomb, swap for carbon fiber or bricks depending on your preference glossy red plastic => for the colored strips, the new lumi work good there *** The HWSS Tranquility is a very efficient M core hybrid ship, able to fill pretty much every roles: Hauling & Missions: can lift 7-9kt out of alioth (without AGG, depending on pilot skills), two hubs: one with 10 containers L, the other with 3 containers L (can be increased to 7) Can be equiped with (elements not included): - Deep Space Asteroid Tracker, with an easy access from pilot seat, or that spot can also be used as landing pad for a small speeder / warp shuttle - Anti Gravity Generator, with a dedicated spot in middle of ship - L Shield on front of ship, using the "enclosed front" - 3 scanners with several spots all over the ships Quick placement guides for those elements are included via info buttons Standard version is T2: - 20x T2 military atmo - 2x T2 military XL space - 2x T2 maneuver XL space Kit provided allows to change colors and ship front to either: - Open with landing pad (can fit any XS or a tiny S core) - Enclosed, to place L shield or 4 extra containers L, and landing pad on top An insane amount of time has been spent on the voxels! Complexity is about 90% on most chunks The very first version of this ship is as old as beta and has gone through several reworks. Mk1 became a fairly popular ship, and, Thanks to all owners feedback over time, this Mk2 is a real upgrade on several aspects: more efficient, modular and pretty! Like all Aerogics ships, comes with lifetime warranty (check profile page for details)

a lil speeder that can give you a ride ;)

Tunning Kit for the Iron Stalwart LIMITED TO 5 BP´s -More Thrusters = More Power -Max Speed 36k km/h in Space (fully loaded 33k km/h -More Fuel tanks (3x M atmo, 1 L atmo und einen L space) -Fully loaded L Container without Problem in an out of Athmo 1G - Based on the Iron Stalwart on the Market for 3.5 million Limitiert auf 5 BP´s -Mehr triebwerke = Mehr Leistung -Maximaller Geschwindigkeit von 36 tausend Km/h im weltraum ( voll beladen 33 tausend Km/h) -Erweiterte Treibstoff Tanks (3x M atmo, 1 L atmo und einen L space) -Schafft nen vollen L Container ohne zögern rein und aus der Athmosphäre 1G -Kit Basiert auf den Iron Stalwart von Markt dieser gibt es für 3.5 mio -auf wünsch können veränderungen durchgeführt werden -Einzigartig da momentan Einzelstück

ANDARTA_V3 ship with all parts in basic S core S shield S radar 4 missile S 3 L space engine NO HUD NO DRM CCS : 8.64M | 35% all resist in full T1 you can increase your ccs by replacing the mesh with a higher quality mesh > T1 : carbon, silicium, iron, aluminium T1.5 : plastic, steel, silumin, duralmine etc... U can visit me in VR "baxtonAeronotics" Renember, dont buy in VR !!! BP dispencer available at this position : - ::pos{0,27,13.7133,23.1457,54.8997} Have fun

Welcome! - ¡Bienvenidos! IT'S RETURNING! The Aldorado 59 is a XS-sized cabriolet, inspired by an American classic that made its home in Cuba. MK2 version is in the works. Soon available in different colors + limited editions - stay tuned!

Newest Build from Dead Reckoning Shipworks. The Phoenix. Med core light hauler. Has been tested to haul 1.5 kt off Alioth Come see it in VR at Dead Reckoning Ship sales.

The completion of the Moltres heat shield project has allowed new designs that would previously have destroyed themselves seconds after opening up the throttle. The result is a dragster muscle ship that (with lv4 piloting talents) can hit 3000km/h at sea level using only basic engines, has 19Gs of high altitude lift with full fuel, can withstand the fires of a 5000km/h reentry, and can comfortably haul 500t anywhere in the system while maintaining a low starter-friendly build cost. It is certified for hypersonic flight up to 10,000km/h in upper atmosphere! Moltres™ heat shield equipped. Contact the seller after your purchase for free hypersonic flight tips, and activation instructions on the Moltres shield!

LordRapineurX and me are proud to present you the DONARIS Our first ship take Many weeks to create All Stat are for a LVL 0 PILOT Ship is FULL LVL 5 Handling This Version Hybride With AGG With 4 XL engines Manoeuver and 10 Basic Atmo Engine can't lift fret in atmo, you will have to use AGG for this but you can have 15kt in space Also you can land near 35kt of fret in atmo thanks to it's brake We add a bunch of Atmo brake so you can enter on atmo and if the AGG brake or if you forgot to activate it, you can land Safely This Ship is avalaible in 3 versions Hybride cargo and AGG Hybride with AGG for CARGO Space AGG you can visit US and find BP on Locura Shipyard or you can simply visit US in VR "Donaris"

Welcome. You found the ship, or did it find you? Blazing in atmosphere, brisk in space, the Tiger represents Seawing Hypersonics' pursuit of the highest performance level at the lowest price point possible! Featuring an all T1 loadout leaving ample room for upgrades, the Tiger's carefully tuned layout and minimized cross section achieves (with placement buffs and talents) a top speed of 2,500km/h in atmosphere. The ship comes with a modular XL cargo pod consisting of 3 L containers, which enables the ship to handle 1.8kt delivery missions. Like all our ships, the X50 prototype was subjected to over 300+ high speed burn stress flights, with adjustments made after every single flight to reduce burning of its functional elements. The cumulative results of this work is a very high degree of heat resistance baked into the hull design, enabling it to shrug off and push through flames that would have long melted rival ships. The Tiger sits in an ideal middle ground for daily driving. Light enough to handle like a nimble bird when empty, yet with the muscle to move all the ore you'd need to on a daily basis. Its modest tonnage allows for warps that, while not so cheap as a shuttle, won't break the bank either! The Tiger comes fully fitted with a cozy space-maximizing interior featuring: -Functional cockpit switches -Copilot seat with a full set of controls -Gunnery station (the ship can easily mount an M shield generator between the front forks for conversion into PvP capability) -Dedicated server rack to run all your scripts -Surrogate pad -VR pod -Resurrection node -Pilot quarters -Restroom -Kitchenette -Dining/lounge area -Excellent exterior views -Top and Bottom hatch ingress/egress If you've been looking for your 'Millenium Falcon', try a Tiger today! Visit the ship in VR under 'X50 TIGER' For Heat Shield activation instructions, and hypersonic flight instruction contact Seawing Ingame! Hotkey guide: Alt-1: Parking Brake Alt-3: Hypersonic control mode (use this to prevent overloading the heat shield during speeds > 1800km/h) Alt-4: Standard control mode (the default it starts in) Alt-5: Performance mode (maximum pitch/roll rates, do not use during high speed flight, you will overload the heat shield) ++Update 1.14.23++ Voxel art on the top plate completed! You can customize the stripe color during deployment by replacing Glossy Steel voxel. To hide the stripes, simply use Glossy Aluminium.