Dual Universe Creators

An L-Core Space station with 5 landing pads a Small Hangar Bay and Dry Dock for all your Building Projects. The Lower Level is open for Storage and some industry.

PYRAMID WARP CELL FACTORY: BETTER THAN THE REST CHEAPER THAN THE REST MAKES APPROX. 244 WARP CELLS PER DAY! 288 WITH LVL 4 TALENTS! LVL 4 PUT DOWN SERVICE 5MIL DOES NOT COME WITH SCHEMATICS. LIST OF SCHEMATICS NECESSARY CAN BE FOUND ON OUR DISCORD. UNLIKE THE OTHER MODELS FOR SALE ON DU THIS FACTORY COMES WITH EVERYTHING LABELED FOR EASY SCHEMATIC PLACEMENT. SCREEN LUA, SAME BASIC DIMENSIONS AS OUR OTHER FACTORIES SO THEY WILL ALL LINE UP NICELY. LIKE ALL OUR FACTORIES; EVERYTHING IS CONTAINER HUBBED FOR EASY EXPANSION, COMES WITH DISCORD AND IN GAME SUPPORT DISCORD: THE PYRAMID CO, https://discord.gg/MsMDcbgWBB CHECK OUT OUR SPACE CORE VERSION! MAKES THE SAME AMOUNT AS OUR STATIC VERSION!

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

New pads from The Gray Order (changed name from ADMI to Gray) Large core fully detailed with easy to use placement the footings are a basic voxel shape so if you need to make it taller is super easy! There are 2 dispensers one for regular 6mil and other is for discount option if you want 10 for 10mil off ( 50mil instead of 60mil) thanks for shopping cords for base are same VR "ADMI build store" position ::pos{0,2,-24.6313,16.8071,150.4663} name subject to change soon will alter here too.

L core tower with Hangar and lots of space for Industry VR: SKY Blueprint Store ::pos{0,2,54.1655,109.9058,46.1828}

This is a small core starter warp cell factory designed mainly for personal use production of warp cells. All industry is labeled via screens for easy startup. Pre installed with Indy Hud by Codeinfused. Current setup will make 2 warp cells every 50mins with no talents. This can be increased easily by adding more glass furnaces for the warp cells and increasing the output of a few of the electronics machines. Industry placement talents will also increase speed of output. All industry units are labeled. You can view it by VR at Phoenix Corporation Location ::pos{0,2,47.8459,114.4380,62.5178}

PYRAMID T1-3 REFINER+FUEL FACTORY This factory does just what it says. Also makes nitron and X1-4 fuel from byproducts and 2 adjustable transfer units to control how much is made. 8 basic refiners to keep up with most schematic demands. Easy use: Ore in, Waste Out, Product Out format All container hubbed for easy expansion! READ OUR BIO FOR MORE INFO

In the process of moving, blueprints are available to Kosmos Exchange. It's Honeycomb...in space! No longer will you need to make element only ships deep in space, put some voxels on it and style that thing up! PvPers, come on, put a skin on that naked hot dog you're shooting with. You can even dress it up as an actual hot dog with the right voxels at your fingertips. Factory is built on my Fidget station technology and features T1-T3 honeycombing capabilities. Easy to use LUA control for the honeycomb machines (html needs to be enabled for T3 due to a technical issue with Aerogics honeycomb script so using SilverZero's older script that still works like a champ). Come see it in VR at "Czar in Space Showroom" either fly outside or head to the small unmarked door on the end with the landing pad sets. Located in person here ::pos{0,0,-41989.3752,202219.7557,33651.8498}

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

When not crashing into the ground at 5000km, perhaps you'd like a place to land nicely with a touchy of style on something that's super easy to put together? Sounds like CzarsLandyPad might work for you. I like the looks, my mom likes the looks, my dog thinks it's stylish, and my goldfish can put it together. Customizable from XS size all the way to custom multiple core sizes. As a perk, when assembled, a landing pad can also house all kinds of stuff inside....yes, inside! Tall enough for a large container which we all know can house many dead bodies from your pvp conquests or imagination. DRM free It's on an XS dynamic core so you can put it anywhere and even dock and transport. Come see them in action: Alioth Space VR coming soon

We are also located at the Alioth Exchange in the Red Isle Are you just a Ship Builder and would like to just make your own Dynamic Cores without the cost of having to buy a core factory that makes them all???? I got you!! This Dynamic Core Factory produces all size cores This is what it will produce every 24 hours with no industry talents XS Dynamic Cores---720 S Dynamic Cores-----60 M Dynamic Cores----4 L Dynamic Core-----0.7 For any questions, please reach out to me on Discord or Join my discord We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions