Dual Universe Creators

50% off blueprint price at the moment on dispenser A stylish workshop for building XS,S,M core's, plenty of room for deploying your voxel library cores with storage on platform and plenty of freedom to customise your workshop inside like copy and past all your voxel librarys to the inner walls and corners of the workshop for easy access for when your building, placement rules are 1 click down and the enterances are facing you when u deploy the BP you can check it out in VR search for loaded industries showroom for anyone that purchased before 7th may please let me know and i come and release the drm on your building

50% off blueprint price at the moment on dispenser loaded industries presents large core space landing pad, this is the same as my ground version with basement thanks to daddyshark for doing the conversion for me, you can easily add these to any other building you have in space just square up the blueprint and do 2 clicks down when level on the core your stood on or just place in space any where you like, dispensor can be found at my base

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

Luxury pads that where originally built in beta and now redone with better skills. Large core uses mostly plastics and some wood there is a little bit of gold but not enough to break a bank! P.S. there is a little copper in the bp i havnt located yet swap this out for the gold is like 0.69m3 of it. Will be working on roads for this pad in the future thanks for looking!!! Located at ::pos{0,2,-24.6984,16.9672,135.7213} on alioth. Can vr temporary location of surrogate at ADMI store temp.

-- Can be viewed in VR: Hadron HQ Alioth --- Introducing the Hadron M Factory The factory shell has been laid out for production of all T1 to T3 pures, products, parts and elements, with plenty of room to install T4 + T5 if needed. Comes with 5 floors and 6 mining units connected to the Jericho mining script. Comes with programming boards preinstalled for augmented reality labels, allowing you to quickly locate industry on any floor and easily read the layout of the factory at a glance. The container hubs are placed on customizable screens so you can neatly organize your storage to your needs. The blueprint uses T1 voxel and luminescent glass exclusively. No industry units or containers are included in the blueprint as the augmented reality makes installation of industry easy. This is so you can choose what to produce when you want or need it. The images alone aren’t enough to showcase all the detail our factory has to offer so please visit us in VR but remember to purchase in person! VR: Hadron HQ To showcase the factory and explain the layout we made an video tour of the factory: https://www.youtube.com/watch?v=BJXpXqc4MaI

50% off blueprint price at the moment on dispenser This showroom kit will allow you to build any size showroom you wish to house as many ships as you like, its very easy to do just like the hangar kit, its panels are also same size as the hangar kit so you can even easily decorate the outside walls of your hangar with this kit or even be creative and mix and match, everything you see in the pictures of these buildings are in this kit the only thing you have to do is fill the empty space on roof and make your own link from the balcony curve which is all very easy, also comes with a detailed floor panel 50 x 50 voxles in size for very easy placement which you can use in any of your other buildings you may own. you can with a bit of time change the mats of all the panels to suit your colour of choice endless possibility, you will also find what i call end caps to finish off parts that are left open from your build can view in VR search loaded industries showroom any questions please dm me on discord loaded#2378

Brand new space station. This station is build for factories or to get storage in space up and running in a nice shell. Under the floor there is a lot of space to expand with expended xl containers. New players get a big discount or free. And if you need more stations then i can also make a special deal for you. Message me on discord on Jasper_1. Check it out at VR: Space station shop

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

A Lighthouse.... Illuminates your way back home. VR to "Alioth Marina" Drm free in case you want to transfer the Lighttower to your own static core, there are full instructions for configuring the lighting included on an info button

M core Outpost with T1 pure material production, fuel and honeycomb Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store XS Core size Elevator dock on top

UPDATE now available in new release. Just came back to the game, prices may be negotiable contact me in game or on discord Vazrik#6937 *4,000,000 per core, Not including materials. Recommended Galvanized gray aluminium and Luminescent White glass. 4100 honeycomb single voxel thick per core 8200 honeycomb double voxel thick per core 1 L core per core Roughly 200 Luminescent glass per core (may vary but its a good starting guestimate) *Custom built to match your current setup. *Accurate runway measurements and markings(doubled in size to increase visual and utility) *Recommended at least 16 cores in length, 13 cores in length is minimum for this design. Redesigns are necessary for anything smaller, this may be possible to achieve but will be at additional cost. *Can add taxiway's or possibly parking pads if needed, should be no change in price per core depending on the request.

50% off blueprint price at the moment on dispenser This is a kit for the outpost landing pad as picture this kit is not for beginners its best suited for anyone that knows the fundamental of how to copy and paste and rotate etc in game, there is some over lapping you will also have to do as this pad design is very large but follow the link below and hopefully ive made it clear enough :) link for instructions to follow https://imgur.com/a/ZKcLP2q for VR please search loaded industries showroom

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 This is a double landing pad with 2 xs core size garages with plenty to space to add a factory or office space with viewing balcony, perfect for any outpost you can view at the location written on the right of the screen or view in VR search for loaded industries

A Fuel and Cell Station Module on M core Small landing pad on top for S core size ship Control tower with 360° view! 4 corridors to connect other modules / space elevator No machine on the blueprint Lower area has several spots for various industry machines, ie: - rounded area can hold up to 20 containers L - 36 refiners / smelters in angled corners - 16 chemicals / glass furnaces in center can be seen on VR: Aerogics Space Station

Derrick (Nodding Donkey, Pump Jack) Mining Unit. Holds 4 Mining unit L. 1x L container with Hub. Screens and board for Lua. Space underneath for Ore Collection. Comes with 4 Basic MUs, 1 L Container, 1 Hub, 2 Screens, Prog Board, Vr Pod, lights etc.. Most Voxels in Iron. All Basic Stuff