Dual Universe Creators

50% off blueprint price at the moment on dispenser loaded industries presents large core space landing pad, this is the same as my ground version with basement thanks to daddyshark for doing the conversion for me, you can easily add these to any other building you have in space just square up the blueprint and do 2 clicks down when level on the core your stood on or just place in space any where you like, dispensor can be found at my base

An L-Core Space station with 5 landing pads a Small Hangar Bay and Dry Dock for all your Building Projects. The Lower Level is open for Storage and some industry.

BP dispenser located on Alioth at ---> ::pos{0,2,24.6416,120.5044,3.8850} That building is in an L Core. I don't like the huge factory blocks at all, so I took an L Core and gave myself free rein in the dimensions and design of the building. From my point of view, the entire core does not always have to be used. It is important to me that buildings fit in well with their surroundings, be it in the city or in the country. The building is an empty shell! Setting up the factory or your office in the building is entirely up to you. Below the asphalt there is enough space for you to build your own cellar with containers and industry. you can find the core in the center below the floor if you have any questions or suggestions for improvement, please let me know! VR: "Calpone Showroom" dispenser ---> ::pos{0,2,24.6416,120.5044,3.8850}

Originally designed in Alpha 1, this stalwart Logistics Centre is a great benefit to most serious solo players, and small to medium Organisations. Boasting a whopping 201 Large Containers, managed over 68 Hubs to provide 576kl each at Basic level, this Logistics Centre can really help ensure you keep organised and well stocked! Featuring two Storage zones (one above, one below ground), two large offices for Lua projects, entertaining guests or providing a dispenser store front, with two smaller offices for personal use, a loading bay for small haulers and 2 landing pads on the roof, capable of handling smaller M core ships. Please note: Decorative elements are used only for advertisement / suggestion. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

VR "VO Factory Sales" This will make all sizes and all models of atmo fuel based Engines including Hover engines!! You can make x4) Large, x2) Medium x2) Smalls and x2) X small engines at the same time All my factories are built to make it easy for the new players or players that dont have much experience in factories and everything is labeled to let you know what to set each unit and each unit or set of units also lets you know what schematics are needed!

One L core and 8 landing (M core) pads that align with the L core. I can help install everything For more info DM Jasper_1 on discord Discound if u buy more 2 for 25 mill 3 for 35 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

Ikara Industries presents the "Ikara Landing Pad KIT T1 (DRM Free)". You have a nice ship but you don't want to land on earth. Then the Ikara Landing Pad KIT T1 is just what you need. The landing pad kit includes - DRM Free - Staircase to the landing pad - 2 different designs - Recess for two screens Placement rules: Hold SHIFT, If you set the modules. What else you should know: Examples: Building a S Core version 4 x Modules Variant 1 Building a M Core version (one side) 4 x Module Variant 1 (4 voxels remain, just move the panels by 2 voxels in each direction) to Buy, Questions? - Message @Ikara2184#2629 on discord.

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check your joins before you deploy construct.

2 Large Static Core Factory. Made for the most enthusiastic Factory Manager. Features placement pads & sign placement for all machines. Catwalks for easy access and a large Landing pad up top. Tons of room for storage, May take years to fill up!!!,,bit of an exaggeration here. Large enough to handle any sized organization. Come Visit at "Rifter Shipworks" public VR BP's Avail here ::pos{0,22,-32.0802,58.7871,-17.5292}

-- Can be viewed in VR: Hadron HQ Alioth --- Introducing the Hadron M Factory The factory shell has been laid out for production of all T1 to T3 pures, products, parts and elements, with plenty of room to install T4 + T5 if needed. Comes with 5 floors and 6 mining units connected to the Jericho mining script. Comes with programming boards preinstalled for augmented reality labels, allowing you to quickly locate industry on any floor and easily read the layout of the factory at a glance. The container hubs are placed on customizable screens so you can neatly organize your storage to your needs. The blueprint uses T1 voxel and luminescent glass exclusively. No industry units or containers are included in the blueprint as the augmented reality makes installation of industry easy. This is so you can choose what to produce when you want or need it. The images alone aren’t enough to showcase all the detail our factory has to offer so please visit us in VR but remember to purchase in person! VR: Hadron HQ To showcase the factory and explain the layout we made an video tour of the factory: https://www.youtube.com/watch?v=BJXpXqc4MaI

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"